For rxTools you need to use this themhax version : https://gbatemp.net/goto/post?id=5693777#post-5693777 (install it on your sysnand with ninjhax2/tubehax/browserhax...)
with this boot.bin : http://files.mydedibox.fr/files/Dev/3ds/rxtools_boot.3dsx.zip
(along with the files from the latest rxtools nightly)
And it only work with unliked emunands, on a 9.0-9.2 console.
with this boot.bin : http://files.mydedibox.fr/files/Dev/3ds/rxtools_boot.3dsx.zip
(along with the files from the latest rxtools nightly)
And it only work with unliked emunands, on a 9.0-9.2 console.
Last edited by VerseHell,
rxTools work on a n3ds with this steps : https://gbatemp.net/threads/release...olkit-fw-2-0-9-2.382782/page-611#post-5693065
But you can't autoboot on the emunand, just on the rxTools menu.
There is also a french guide here : http://www.logic-sunrise.com/forums...rowserhax-sont-disponibles/page-2#entry820642
But you can't autoboot on the emunand, just on the rxTools menu.
There is also a french guide here : http://www.logic-sunrise.com/forums...rowserhax-sont-disponibles/page-2#entry820642
In this Download Package, there's no boot.3dsx xD
Should I use Ninjhax 1.1b boot.3dsx or is there another way to boot directly to RxTools/Pasta
okay, tried it with this 3dsx.
1. I'm on N3DS Firmware 9.0.0-25E
2. Installed ThemeHax 1.2 via Cubic Ninja + NINJHAX 1.1b
3. copied the boot.3dsx (rxtools) to root of the sd card.
4. rebooted the N3DS
now every 3 seconds the bottom screen blinks red. nothing else happens.
RxTools is installed to SD:/RxTools/
code.bin is inside of SD:/RxTools/sys/
The boot rate seems to be low on a n3ds currently.
It seems to depend on the version of ThemeHax being used. I get about 90% success in booting when using the version that requires "L trigger" to be held.
The boot rate for the auto-boot version is only around 30%.
urgh... When I boot rxtools through MSET, it boots EVERYTIME.The boot rate seems to be low on a n3ds currently.
Don't understand this problem x__x
Im on N3DSXL 9.2 EU ninjhax 2.1.
Is there any option to boot CFW besides Pasta? I tried the pasta but it is not working...
Is there any option to boot CFW besides Pasta? I tried the pasta but it is not working...
Cakes is working, at least a new build that someone posted in the cakes thread recently.
Similar threads
-
-
@
Psionic Roshambo:
One thing that just occurred to me.... The sound on the 2600 sucked less back then the harsh sound we hear now is from infinitely better speakers we have now, back when the 2600 was new speakers produced a almost muffled sound, like CRTs made old graphics look slightly better. -
@
Psionic Roshambo:
I wonder if I could recommend that to some emulation devs that perhaps the sound could use some smoothing out to simulate those old TVs
-
@
Psionic Roshambo:
I think a few of the early systems could benefit from that, at least up to the 8 bit generation, by the 16 bit generation I think TVs had gotten a lot better in almost every way
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
it says it only works for the original R4, R4i Gold (r4ids.cn), R4iDSN (r4idsn.com) and Acekard R.P.G. -
-
-
-
-
-
@
Psionic Roshambo:
Just give it a try, but honestly if you have a 3DS you can play DS games without a card just off the internal SD card
-
-
-
-
-
