Hacking Can't install nsp

[Danitux]

Hi everyone, as i said in the title i cant install an nsp and i tried with a lot of methods. I have to say i am very noob in this since i only installed 2 nsps.

I installed the other 2 nsps by putting them in the microSD and installing from goldleaf, i have a FAT32 microSD so this was posible because the files were of 2gb. The nsp i am trying to install now is a 7gb one so i cant do the same method, i tried splitting It in ns ubs loader, but when i install It from goldleaf It gives me error saying the nsp is invalid ( Error: 2356-0009 (0x1364) Module: Goldleaf(365) Description: PFS0 (NSP) invalid (9) ) (that is the error that appears) and when i try from awoo/tiwoo It installs like in 0,000001 seconds It says It worked but when i go to the main menu the game is not there...

I also tried connecting with USB using ns usb loader but when i use goldleaf i dont know why but the files dont appear there and when i use awoo/tiwoo and i try to install the nsp it gives me an error ( Parcial downloaded contents can be deleted in the configuration menu of the console. BufferData:189: Timeout expired or error in USB transference). I tried this same method with the other 2 nsps and it worked so i dont know if the other nsp has something special that makes it uninstalleable

These are my specific versions:

Awoo: 1.3.4
Goldleaf 1.10.0
Hekate 5.7.0
Atmosphere 1.2.6

Thanks for helping (:

PD: Sorry for bad english

 

[BaamAlex]

I dont know where to see atmosphere

In system settings - firmware version

 

[Dust2dust]

Forget about Awoo and Goldleaf. Try this instead for USB installing.
https://github.com/rashevskyv/dbi/releases

 

[Danitux]

Hi everyone, as i said in the title i cant install an nsp and i tried with a lot of methods. I have to say i am very noob in this since i only installed 2 nsps.

I installed the other 2 nsps by putting them in the microSD and installing from goldleaf, i have a FAT32 microSD so this was posible because the files were of 2gb. The nsp i am trying to install now is a 7gb one so i cant do the same method, i tried splitting It in ns ubs loader, but when i install It from goldleaf It gives me error saying the nsp is invalid ( Error: 2356-0009 (0x1364) Module: Goldleaf(365) Description: PFS0 (NSP) invalid (9) ) (that is the error that appears) and when i try from awoo/tiwoo It installs like in 0,000001 seconds It says It worked but when i go to the main menu the game is not there...

I also tried connecting with USB using ns usb loader but when i use goldleaf i dont know why but the files dont appear there and when i use awoo/tiwoo and i try to install the nsp it gives me an error ( Parcial downloaded contents can be deleted in the configuration menu of the console. BufferData:189: Timeout expired or error in USB transference). I tried this same method with the other 2 nsps and it worked so i dont know if the other nsp has something special that makes it uninstalleable

These are my specific versions:

Awoo: 1.3.4
Goldleaf 1.10.0
Hekate 5.7.0
I dont know where to see atmosphere but i think is the latest.

Thanks for helping (:

PD: Sorry for bad english

Forget about Awoo and Goldleaf. Try this instead for USB installing.

i used goldleaf, awoo, dbi and tinfoil, nothing worked ( that installing the splitted file from the sd ) i dont know how to install dbi and tinfoil in usb

 

[Danitux]

In system settings - firmware version

thx i edited it!

 

[Dust2dust]

i used goldleaf, awoo, dbi and tinfoil, nothing worked ( that installing the splitted file from the sd ) i dont know how to install dbi and tinfoil in usb

i used goldleaf, awoo, dbi and tinfoil, nothing worked ( that installing the splitted file from the sd ) i dont know how to install dbi and tinfoil in usb

DBI is just homebrew. You just copy the nro file to your SD card and launch it. Instructions (if you didn't find them)
https://github.com/rashevskyv/dbi/blob/main/README_ENG.md

 

[Danitux]

DBI is just homebrew. You just copy the nro file to your SD card and launch it. Instructions (if you didn't find them)

i already had the nro file but what i dont know is how to send a file with usb ( sorry for being so stupid)

 

[Dust2dust]

i already had the nro file but what i dont know is how to send a file with usb ( sorry for being so stupid)

Oh OK. I use the backend for the PC. It works fine for me. Some people have success with MTP mode also.
It's in the instructions: https://github.com/rashevskyv/dbi/blob/main/README_ENG.md#install-title-from-usb

 

[Danitux]

Oh OK. I use the backend for the PC. It works fine for me. Some people have success with MTP mode also.

Thanks! Gonna try it and will post my results (:

 

[Danitux]

Oh OK. I use the backend for the PC. It works fine for me. Some people have success with MTP mode also.

Ok this is strange... i used it and the nsp file appeared on the switch but when i press A nothing happens, when doing the same with other nsp it works
what happens?

 

[BaamAlex]

i already had the nro file but what i dont know is how to send a file with usb ( sorry for being so stupid)

Open the NRO and just press x. Connect it to your pc and copy the nsp to "MicroSD install".

 

[Danitux]

Open the NRO and just press x. Connect it to your pc and copy the nsp to "MicroSD install".

where is microsd install? edit: i found it

 

[Danitux]

Open the NRO and just press x. Connect it to your pc and copy the nsp to "MicroSD install".

ok i did it but when the file is completely into my switch what i press to install it

 

[Danitux]

Open the NRO and just press x. Connect it to your pc and copy the nsp to "MicroSD install".

BaamAlex i did it all and when i try to install it i get the exact same error

 

[BaamAlex]

what i press to install it

Nothing. DBI installs the game while you copy the game to "MicroSD install".

 

[Draxzelex]

BaamAlex i did it all and when i try to install it i get the exact same error

Do you have the patches on your SD card?