Can't get SD2vita to work on h-encore 3.68 vita

Discussion in 'PS Vita - Hacking & Homebrew' started by Chrisssj2, Aug 5, 2018.

  1. Chrisssj2
    OP

    Chrisssj2 GBAtemp Advanced Maniac

    Member
    7
    Feb 12, 2008
    Netherlands
    I have had 2 vita in the past.. used sd2 vitaInstalled it with this link: http://wololo.net/2017/07/20/setting-sd2vita-adapter-formatting-microsd-can-done-windows/

    For my 3rd vita which is on 3.68 its proving impossible.

    Now i try to install it with storagemgr.. but no uma0 to be found...Using default storagemgr configmcd= uma0 Int=imc0 GCD=ux0 Uma=grw0

    Tried https://github.com/theheroGAC/TF-Card-Plugin-Tool/releasesBut nothing will show up my sd card.

    Then finally i try it with my old link the wololo one. with the uma0 gamesd.Run henkaku @h-encore. and it reboots my vita when exiting the h-encore app.If I reset taihen config i can exit h-encore again normally.. and use henkaku.

    WTH is going on. Why can't I seem to get this working.

    SD is setup as EXFAT with default cluster and used Blank img beforehand...Brand new SD2vita adapter unused.
     
  2. warheit

    warheit Member

    Newcomer
    3
    Sep 14, 2009
    Australia
    Melbourne
    because with storagemgr, you are not supposed to use the default config and you are supposed to edit it to suit your need.

    your storagemgr config should be:

    MCD=uma0
    INT=imc0 (remove if vita phat)
    GCD=gx0
    UMA=grw0

    • MCD : official SONY memory card
    • INT : internal memory 1GB (on all PSVita SLIM and PSTV)
    • GCD : microSD inserted into SD2VITA (also called gamecard2sd)
    • UMA : USB mass (for PSTV) OR microSD inserted into PSVSD (for PSVita 3G)
     
  3. Chrisssj2
    OP

    Chrisssj2 GBAtemp Advanced Maniac

    Member
    7
    Feb 12, 2008
    Netherlands
    I have phat vita yes.
    gx0 is nowhere to be found in readme. I think thats a mistake.

    My config is now:

    MCD=ux0
    INT=imc0 (remove if vita phat)
    GCD=uma0
    UMA=grw0

    So i can copy contents from my sonyMC to my SD card, and mount the SD card as UX0 after that is done.
     
Loading...