Burning with imgburn issue (isos)

Discussion in 'Wii - Backup Loaders' started by yoyoloto, Mar 4, 2011.

Mar 4, 2011
  1. yoyoloto
    OP

    Newcomer yoyoloto Advanced Member

    Joined:
    Dec 6, 2010
    Messages:
    95
    Location:
    Canada
    Country:
    Canada
    Hi, I have tried to burn a multigame iso using imgburn to my DVD-R so that I can later on play it on my wii using the Gc laucher, the writing seems to have succeeded.
    But during the verification, however, I get the following message:

    I/O error!

    Device:[0:1:0] TSSTcorp CDDVDW TS-L633C TF20 (D [​IMG](ATAPI)

    ScsiStatus:0x02
    Interpretation: Check condition

    CDB: 28 00 00 05 6A B6 00 00 01 00
    Interpretation: Read(10) - Sector: 354998

    Sense Area : 70 00 03 00 00 00 00 0A 00 00 00 11 05 00 00 00 00
    Interpretation : L-EC Uncorrectable error

    this problem happens at 17% through the verification, the iso has 4 games in it, and its size is 4.2 Gb while my DVD-R has 4.8Gb, so enough space.
    The same problem happened when I tried burning a single game.

    I did a little research and some threads said that it could be the disc's quality, but its a brand new one and I've tried on not only one of them, the brand is memorex.
    I also tried verifying with all applications closed, but nothing changed :S

    Here is my log from imgburn:


    I 12:01:09 Link Size: Auto
    I 12:01:09 Lock Volume: Yes
    I 12:01:09 Test Mode: No
    I 12:01:09 OPC: No
    I 12:01:09 BURN-Proof: Disabled
    I 12:01:11 Write Speed Successfully Set! - Effective: 4 155 KB/s (3x)
    I 12:01:12 Filling Buffer... (40 MB)
    I 12:01:13 Writing LeadIn...
    I 12:01:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 2054847)
    I 12:01:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2054847)
    I 12:17:29 Synchronising Cache...
    I 12:17:54 Exporting Graph Data...
    I 12:17:54 Graph Data File: C:\Users\Proprio\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633C_TF20_4-MARS-2011_12-01_CMC_MAG._AM3_3x.ibg
    I 12:17:54 Export Successfully Completed!
    I 12:17:54 Operation Successfully Completed! - Duration: 00:16:44
    I 12:17:54 Average Write Rate: 4 409 KB/s (3.2x) - Maximum Write Rate: 4 618 KB/s (3.3x)
    I 12:17:54 Cycling Tray before Verify...
    W 12:18:08 Waiting for device to become ready...
    I 12:18:21 Device Ready!
    I 12:18:21 Operation Started!
    I 12:18:21 Source Device: [0:1:0] TSSTcorp CDDVDW TS-L633C TF20 ([​IMG]) (ATAPI)
    I 12:18:21 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 3x; 4x; 6x; 8x)
    I 12:18:21 Image File: C:\Users\Proprio\Desktop\BK-Metro-Animal.iso
    I 12:18:21 Image File Sectors: 2 054 848 (MODE1/2048)
    I 12:18:21 Image File Size: 4 208 328 704 bytes
    I 12:18:21 Image File Volume Identifier: CDROM
    I 12:18:21 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING
    I 12:18:21 Image File File System(s): ISO9660 (Bootable); Joliet
    I 12:18:21 Read Speed (Data/Audio): MAX / MAX
    I 12:18:21 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2054847)
    I 12:18:21 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2054847)
    W 12:21:11 Failed to Read Sector 354998 - Reason: L-EC Uncorrectable Error
    W 12:26:04 Retrying (1)...
    W 12:26:12 Retry Failed - Reason: L-EC Uncorrectable Error
    W 12:26:47 Retrying (2)...
    W 12:26:55 Retry Failed - Reason: L-EC Uncorrectable Error

    Thank you for the help.
     
  2. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    try another disc image. The disc image may be corupt.
     
  3. wiimanofthenorth

    Member wiimanofthenorth GBAtemp Regular

    Joined:
    Jan 18, 2011
    Messages:
    285
    Country:
    United Kingdom
    Not all DVD drives can read GC / Wii discs. So even though you can burn the data, you can't read the data back in, to make sure it's a clean burn.

    All you can do is put in the Wii and see if it plays!
     
  4. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,429
    Location:
    Engine room, learning
    Country:
    France
    You can't open it in the explorer because it's encrypted, but the burner can verify the written data without problem as the data has been aligned/unscrambled for standard ISO9660 booktype.

    Does this error happens only for gamecube games ?
    does burning Wii ISO or an ISO for computer or creating DVD with your own files and folders verify just fine ?
     
  5. yoyoloto
    OP

    Newcomer yoyoloto Advanced Member

    Joined:
    Dec 6, 2010
    Messages:
    95
    Location:
    Canada
    Country:
    Canada
    Sorry for the late answer and thanks for your replies.
    @Hells guardian: I tried different disc images, I dont think they are the problem since I played them on the emulator dolphin. Even the burning is fine, its the verification step that is causing me trouble [​IMG]

    @wiiamnofthenorth: the burning is canceled if the verification doesnt finish, leaving my blank disc with only a few kilobytes of data, so inserting it in my wii won't help me test anything, I will do that if I manage to actually complete the burning.

    @Cyan: I have only tried with gamecube games so far, I could try with wii games but I'm afraid that I waste another blank disc, 2 of them have already ended up in failure, but if I find myself in a desperate situation I'll have to. Do you think that using a different burner might also work ?
     
  6. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,429
    Location:
    Engine room, learning
    Country:
    France
    what's strange is that it's happening only on the verification, not at the burning process.
    You say that when the verification stop, you have few kb of data only ? I thought the verification occurred after the burning process, so the data should be already fully written.

    The logs clearly show that the burning process was successful, then it try to verify.
    disable the verification ? (no, that won't help)
    try another DVD brand maybe.
    Using another burner on your computer should correct the problem only if it's not a reading speed (does your burner have buffer under-run protection ?).
     
  7. Rogue_Syst3m

    Member Rogue_Syst3m GBAtemp Regular

    Joined:
    Sep 14, 2009
    Messages:
    156
    Location:
    J-Ville
    Country:
    United States
    hard or soft modded?
     
  8. yoyoloto
    OP

    Newcomer yoyoloto Advanced Member

    Joined:
    Dec 6, 2010
    Messages:
    95
    Location:
    Canada
    Country:
    Canada
    Yeah I'll try another brand, I think I got some maxwell, are they any good ?
    And yes, imgburn has the buffer underrun protection, could that be a problem ?

    @Rogue: Are you talking about the wii ?If so then I'm still working on it

    ------ Post Merged ------
    Cyan, sorry for double posting but here's something very important:

    I tried alcohol to burn the games and it "succeeded".
    The thing is, when I took out the DVD and put it back to see what was burned, the files were all ( 3 files ) between 2000 and 1000 kilobyes size.... which means that its not the verification crash that makes them this small.

    Have you ever noticed something like this ?

    EDIT: its getting even weirder ! the game is working ! but its black and white [​IMG] the sound is good though and even the graphics are good (excluding the lack of colour)
    Don't you think that these files were supposed to be that small ?
     
  9. Cyan

    Global Moderator Cyan GBATemp's lurking knight

    Joined:
    Oct 27, 2002
    Messages:
    16,429
    Location:
    Engine room, learning
    Country:
    France
    I don't think I ever put a burnt GC disc on my computer so see its content.
    I thought the files couldn't be accessed, like on Wii.

    If you see only few files, maybe because the TOC doesn't list them (like Xenogears disc for example. The disc was empty of files, but the data was present physically, just not listed as a file).
    The files are maybe the boot.dol to actually launch GCOS (gamecube OS and multi-game selection)

    About the black&White, it should be because you are using RGB or composite cables. You should try Component, or another TV, or burn games from your actual region. (well, that all I can think for the moment).


    Edit :
    Ok, I think I know the problem.
    see here : http://gbatemp.net/t280051-first-gc-multig...t&p=3506103

    The latest version of the multi iso creator has a bug.
    Use the previous one. (though, all the games will be set to PAL by default, you have to select "force ntsc" or "force progresive" etc. when launching the game)
     
  10. yoyoloto
    OP

    Newcomer yoyoloto Advanced Member

    Joined:
    Dec 6, 2010
    Messages:
    95
    Location:
    Canada
    Country:
    Canada
    Thanks again for your answer.

    Yep, one of the files is boot.dol, I guess my pc just couldnt read the gamecube, as it does for real gc games.

    I'm gonna try the creator later tonight when I get some more blank DVDs. I think it's gonna work from what I have tested on my wii, I'll let you know
     
  11. yoyoloto
    OP

    Newcomer yoyoloto Advanced Member

    Joined:
    Dec 6, 2010
    Messages:
    95
    Location:
    Canada
    Country:
    Canada
    Works now thanks cyan
     

Share This Page