Hacking Brick! But can enter in recovery mode and have Nand backup

[Stecker8]

Brick i was restoring emunand into sysnand and it bricked my 03ds i have black screen but i can enter on recovery mode I have a lot of nand backups is there any form of unbrick system without update to 10.6 and without a hardmod

 

[nero99]

Brick i was restoring emunand into sysnand and it bricked my 03ds i have black screen but i can enter on recovery mode I have a lot of nand backups is there any form of unbrick system without update to 10.6 and without a hardmod

No. You are now forced to update and have hard mod done since your bricked. But before updating and whatnot. Try booting the system without the sd card inserted.

 

[Tescowiec]

No, you have to either update or flash the NAND backup onto your console. Hardmodding isn't that hard, there is a nice tutorial on this site in the tutorials section.

 

[FenrirWolf]

You don't have the lingering ghosts of menuhax on your SD card somewhere, do you? Try deleting extdata from the SD card (and maybe back it up instead of outright deleting it just in case).

 

[Arubaro]

Black screen? no error... nothing?
If it is the case, then you'll have to update

 

[Stecker8]

You don't have the lingering ghosts of menuhax on your SD card somewhere, do you? Try deleting extdata from the SD card (and maybe back it up instead of outright deleting it just in case).

I start 3ds without SD card and it doesn't work

--------------------- MERGED ---------------------------

No, you have to either update or flash the NAND backup onto your console. Hardmodding isn't that hard, there is a nice tutorial on this site in the tutorials section.

Hardmod isn't the problem the problem is I don't have a solder

 

[Arubaro]

I start 3ds without SD card and it doesn't work

--------------------- MERGED ---------------------------


Hardmod isn't the problem the problem is I don't have a solder

Nothing to do then, just update it.

 

[FenrirWolf]

Why don't you tell us exactly what you did and why you did it. Why did you flash your emunand to your sysnand? What method did you use to perform the flash? Did you have a9lh? All you've said so far is that you think you're bricked.

 

[Stecker8]

Why don't you tell us exactly what you did and why you did it. Why did you flash your emunand to your sysnand? What method did you use to perform the flash? Did you have a9lh? All you've said so far is that you think you're bricked.

Ok i downgrade emunand to 2.0 for otp then i flash it with decrypt9 wip

--------------------- MERGED ---------------------------

Ok i downgrade emunand to 2.0 for otp then i flash it with decrypt9 wip

Also i heard about semibricks

 

[FenrirWolf]

So, you downgraded emunand to 2.1. Did sysupdater report any errors during the downgrade process? Did you run the unbricking script on the emunand before flashing it to your sysnand?

EDIT: Wait, I see that you have an O3DS and not N3DS. That might be why you didn't have to run a script.

 

[Stecker8]

So, you downgraded emunand to 2.1. Did sysupdater report any errors during the downgrade process? Did you run the unbricking script on the emunand before flashing it to your sysnand?

No any errors and No

 

[zoogie]

This is why it's a good idea to have sudokuhax installed to sysnand. That way you can do a software nand restore if you're accidently/forced to update for whatever reason.

 

[Stecker8]

So, you downgraded emunand to 2.1. Did sysupdater report any errors during the downgrade process? Did you run the unbricking script on the emunand before flashing it to your sysnand?

No any errors and No

 

[FenrirWolf]

This is why it's a good idea to have sudokuhax installed to sysnand. That way you can do a software nand restore if you're accidently/forced to update for whatever reason.

Sudokuhax would let you flash NAND even if, for example, you updated to 10.6 without a9lh? I might have to get that set up just because.

--------------------- MERGED ---------------------------

No any errors and No

So you didn't run the unbricking script? That was a key part of the OTP guide. I find myself wondering if you really did skip it though, because I'd be surprised that your console even boots to recovery if you did.

 

[Stecker8]

Sudokuhax would let you flash NAND even if, for example, you updated to 10.6 without a9lh? I might have to get that set up just because.

Can you explain me semibrick i saw that someone has black screen on his screen and solved it uncharging the battery

Sorry for my horrible english

 

[zoogie]

Sudokuhax would let you flash NAND even if, for example, you updated to 10.6 without a9lh? I might have to get that set up just because.

No, not a9lh. Some nice member () released a custom version of the DSi mode tool fwtools that will restore a 3ds nand from twl homberew mode. It's somewhere around here.

 

[FenrirWolf]

Can you explain me semibrick i saw that someone has black screen on his screen and solved it uncharging the battery

Sorry for my horrible english

Semibrick can mean different things depending on what caused it. Right now what I would suggest is deleting the extdata folders from your SD card (making sure to back them up if you haven't already) then try booting the console again.

 

[Stecker8]

Semibrick can mean different things depending on what caused it. Right now what I would suggest is deleting the extdata folders from your SD card (making sure to back them up if you haven't already) then try booting the console again.

Doesn't work

 

[FenrirWolf]

Not sure what to tell you, then. Recovery mode might be the only option. It would put you back on to 10.6, but ideally you would have a working (yet unhacked) console by the end of it.

 

[Thunder Hawk]

No, not a9lh. Some nice member () released a custom version of the DSi mode tool fwtools that will restore a 3ds nand from twl homberew mode. It's somewhere around here.

Wait, that's a thing? :o