Hacking Booting into black screen after Choidujour upgrade to FW 9.0.0

Aglae Pheryl

Well-Known Member
OP
Member
Joined
Feb 25, 2014
Messages
447
Trophies
1
Age
54
XP
1,522
Country
France
Hi,

I was trying to update to the latest FW (9.0.0) with Choidujour (my very first try updating this way).
After a while it seemd the process was not doing anything so I forced the console off then restarted (using the SX OS menu & dongle). May be the process was not complete, I don't know.
I set the autorcm mode on and proceeded to boot (no emunaand setup on the console).

All I am getting is a black screen.

Unable to boot anymore. Anyway can I start the whole process again directly from the SX OS boot menu or in any other way?
Thanks.
 
Last edited by Aglae Pheryl, , Reason: Grammar
D

Deleted User

Guest
Guess you have to update your sd-files to latest atmosphere (or sx beta which seems to support 9.0 now as well).

EDIT: Did the update process stuck after 100% flash indicator or before?
 
Last edited by ,

Aglae Pheryl

Well-Known Member
OP
Member
Joined
Feb 25, 2014
Messages
447
Trophies
1
Age
54
XP
1,522
Country
France
I had the choixdujour menu to reboot or install at the bottom of the screen but none were doing anything (may the upgrade proces was still ongoing).
I thought it had completed.
I recall some line saying something like 0 out of 6 ...I thought this was stuck since it was not moving, hence my forcing the reboot.
 
D

Deleted User

Guest
I had the choixdujour menu to reboot or install at the bottom of the screen but none were doing anything (may the upgrade proces was still ongoing).
I thought it had completed.
I recall some line saying something like 0 out of 6 ...I thought this was stuck since it was not moving, hence my forcing the reboot.

Well seems smthg obviously went wrong. Imho you have two possibilities:

1. restore an existing nand backkup (from your console)
2. use raj's guide https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/
 

Aglae Pheryl

Well-Known Member
OP
Member
Joined
Feb 25, 2014
Messages
447
Trophies
1
Age
54
XP
1,522
Country
France
From the SX OS boot menu I have the restore Nand option... Should I first upload the backup folder I have (it includes a folder with 8 characters that holds a restore folder and one BOOT0 + one BOOT1 + 1 rawnand.bin files) to the usd card or should I go to step 2 already ?
Gonna have to leave in a few minutes as I am coaching a soccer team of teenagers but I will be back later on today. Thanks for your help.
 

erazin

Member
Newcomer
Joined
Jun 7, 2018
Messages
21
Trophies
0
Age
39
Location
Netherlands
XP
729
Country
Netherlands
I had the choixdujour menu to reboot or install at the bottom of the screen but none were doing anything (may the upgrade proces was still ongoing).
I thought it had completed.
I recall some line saying something like 0 out of 6 ...I thought this was stuck since it was not moving, hence my forcing the reboot.
I have the exact same issue.

--------------------- MERGED ---------------------------

I have the exact same issue.
Only problem that i have is that there is no backup at all of anything
 

Deobulakenyo

Well-Known Member
Member
Joined
Oct 8, 2018
Messages
584
Trophies
0
Age
50
XP
1,433
Country
Philippines
Install atmosphere on your sdcard.
Boot to atmosphere
Using choi redo the installation of 9.0 fw update
Put sxos v2.9 on sdcard
Boot to sxos
 

mpwjamez

Active Member
Newcomer
Joined
Sep 28, 2019
Messages
26
Trophies
0
Age
39
XP
119
Country
United Kingdom
So are you of meant to have already backuped NAND first or can it still be dumped and restored now will it fix this problem? Because I don’t have nand backed up at this point

--------------------- MERGED ---------------------------

Install atmosphere on your sdcard.
Boot to atmosphere
Using choi redo the installation of 9.0 fw update
Put sxos v2.9 on sdcard
Boot to sxos

--------------------- MERGED ---------------------------

So are you of meant to have already backuped NAND first or can it still be dumped and restored now will it fix this problem? Because I don’t have nand backed up at this point

--------------------- MERGED ---------------------------
So
Install atmosphere on your sdcard.
Boot to atmosphere
Using choi redo the installation of 9.0 fw update
Put sxos v2.9 on sdcard
Boot to sxos
how can I do this? Is there a guide cos all I know is SXOS
 

Cubuss

Well-Known Member
Member
Joined
Aug 4, 2017
Messages
537
Trophies
1
Age
31
Location
High Quality Shitposter
XP
3,473
Country
Netherlands
So are you of meant to have already backuped NAND first or can it still be dumped and restored now will it fix this problem? Because I don’t have nand backed up at this point

--------------------- MERGED ---------------------------



--------------------- MERGED ---------------------------


So

how can I do this? Is there a guide cos all I know is SXOS

upload_2019-9-28_13-23-7.png
 

erazin

Member
Newcomer
Joined
Jun 7, 2018
Messages
21
Trophies
0
Age
39
Location
Netherlands
XP
729
Country
Netherlands
Install atmosphere on your sdcard.
Boot to atmosphere
Using choi redo the installation of 9.0 fw update
Put sxos v2.9 on sdcard
Boot to sxos

What i did was really simple.

1 I extracted the Atmosphere files.
2 Put all the files in sd card folder on the root of your sd card
3 Use payload that is provided to boot switch into Atmosphere
4 Start choidujour and finish the firmware update (its only going to do the last steps)
5 reboot your switch and your good to go

https://1fichier.com/?ccmn5rbgrzr5d341uj0h
 
Last edited by erazin,

bemar

Member
Newcomer
Joined
Sep 27, 2019
Messages
11
Trophies
0
Age
42
XP
104
Country
France
Do you have a link to share for that atmosphere thingy and a tuto if this is not self explanatory ?
If never done before, the best advice would probably be to use Kosmos (can not post link, so first link on google when searching "kosmos swich"
 

Reecey

Mario 64 (favorite game of all time)
Member
Joined
Mar 7, 2010
Messages
5,874
Trophies
2
Location
At Home :)
XP
4,529
Country
Apparently you don’t need to do those steps with Atmosphere to update sxos 9.0 firmware, just keep 2.8beta on your sd card install 9.0 firmware through ChoiDujournx 1.0.2 reboot put 2.9beta on your sd card delete your themes from
sxos/titles... boot back up, should be all ok.

Edit: I have just tested this and works fine the only issue themes now need exfes patches?

Workaround>cancel your lock screen theme in nxthemes installer and everything else works fine.
 
Last edited by Reecey,

mpwjamez

Active Member
Newcomer
Joined
Sep 28, 2019
Messages
26
Trophies
0
Age
39
XP
119
Country
United Kingdom
What i did was really simple.

1 I extracted the Atmosphere files.
2 Put all the files in sd card folder on the root of your sd card
3 Use payload that is provided to boot switch into Atmosphere
4 Start choidujour and finish the firmware update (its only going to do the last steps)
5 reboot your switch and your good to go
So do I need to take off the SXOS boot . Dol file off my sd card first before I do this? Also I can only start the switch through the SXOS dongle which takes me to the SXOS menu

--------------------- MERGED ---------------------------

So do I need to take off the SXOS boot . Dol file off my sd card first before I do this? Also I can only start the switch through the SXOS dongle which takes me to the SXOS menu
Do I load up SXOS menu then boot into hearts and load a payload?

--------------------- MERGED ---------------------------

Hekete not hearts
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • K3Nv2 @ K3Nv2:
    Yeah saw it on my deal sites nearly $10
  • K3Nv2 @ K3Nv2:
    Had this damn blanket in the dryer for 1:15 minutes still damp
  • Veho @ Veho:
    My dryer cycle is 3 hours, I'm not surprised.
  • K3Nv2 @ K3Nv2:
    Know those moments when it feels dry put you put it down still wet af
  • Veho @ Veho:
    Yeah, it's not dry, it's just warm.
  • K3Nv2 @ K3Nv2:
    Use fire
  • Veho @ Veho:
    Can't, it's wet!
  • K3Nv2 @ K3Nv2:
    Mmm wet fire
  • Veho @ Veho:
    I think Adelle sang about that.
  • Veho @ Veho:
    SHE SET FAAAIYAAAH
    TO THE RAIIIIIN
  • K3Nv2 @ K3Nv2:
    Can't oil still catch fire in water
  • Veho @ Veho:
    Why is your blanket oily?
    +1
  • K3Nv2 @ K3Nv2:
    Ffs now the dryers shutting off every 5 minutes
  • SylverReZ @ SylverReZ:
    Good morning
  • Veho @ Veho:
    Sup.
    +1
  • K3Nv2 @ K3Nv2:
    Steak and eggs sound good
  • Veho @ Veho:
    Yup.
  • SylverReZ @ SylverReZ:
    @Veho, It's getting to around 30 degrees celsius here.
  • Veho @ Veho:
    Dropping or rising?
  • Veho @ Veho:
    It's getting to around 30°C here too, it was 35°C for two weeks in a row.
    +1
  • SylverReZ @ SylverReZ:
    @Veho, A mixture of both
  • Veho @ Veho:
    We're expecting some rain/hail here for tomorrow, and then it should be around 30 the whole week, maybe.
    +1
  • K3Nv2 @ K3Nv2:
    The 35c weather is just about done here
    K3Nv2 @ K3Nv2: The 35c weather is just about done here