Hacking RELEASE Atmosphere patches (ES, FS and Loader) [fusee_primary only]

[Lacius]

I posted here wrongly on this topic. I had the tab on this topic and the other open and I made a little confusion. I used the method of the link above that you mentioned and with this method that this error is occurring. The game is in XCI format.

Are you using fusee-primary? Are you using these patches?

 

[johnnyb102]

Are you using fusee-primary? Are you using these patches?

I was loading the atmosphere into Launch and so it really wasn't working. Clicking on Payloads and selecting "fusee-primary.bin" worked Mario Bros. The question I was left with now was if I have an emuMMC I can't use sigpatches?

 

[Lacius]

I was loading the atmosphere into Launch and so it really wasn't working. Clicking on Payloads and selecting "fusee-primary.bin" worked Mario Bros. The question I was left with now was if I have an emuMMC I can't use sigpatches?

You can use an emuMMC with Atmosphere, fusee-primary, and these signature patches.

 

[johnnyb102]

You can use an emuMMC with Atmosphere, fusee-primary, and these signature patches.

I understand.

However when editing bootloader / hekate_ipl.ini and switching secondary to the primary it does not boot from the launch

See below
[CFW - sysMMC]
fss0=bootloader/payloads/fusee-primary.bin
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

Error while loading fss0:
bootloader/payloads/fusee-primary.bin
Wrong ini cfg or missing files!
Failed to launch HOS!

PS: And the file is in the directory

 

[Lacius]

I understand.

However when editing bootloader / hekate_ipl.ini and switching secondary to the primary it does not boot from the launch

See below
[CFW - sysMMC]
fss0=bootloader/payloads/fusee-primary.bin
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

Error while loading fss0:
bootloader/payloads/fusee-primary.bin
Wrong ini cfg or missing files!
Failed to launch HOS!

PS: And the file is in the directory

Why are you using Hekate?

 

[johnnyb102]

Because it is the only method I know how to use! I'm new to this "atmosphere" world

Why are you using Hekate?

Because it is the only method I know how to use emuMMC! I'm new to this "atmosphere" world

 

[Draxzelex]

Because it is the only method I know how to use! I'm new to this "atmosphere" world

The better question is why are you posting in the patches thread titled "fusee_primary only" if you are using Hekate. Hekate's patches can be found here.

 

[johnnyb102]

The better question is why are you posting in the patches thread titled "fusee_primary only" if you are using Hekate. Hekate's patches can be found here.

No problems anyway thanks for your help. But it was like I said I was trying to use this method using emuMMC with hekate so I raised this doubt if it was possible to use it, apparently it will not be possible to use emuMMC from hekate. Have nice sunday!

 

[Draxzelex]

No problems anyway thanks for your help. But it was like I said I was trying to use this method using emuMMC with hekate so I raised this doubt if it was possible to use it, apparently it will not be possible to use emuMMC from hekate. Have nice sunday!

But it is possible to use emuMMC with Hekate as long as you use the right patches. I use the patches linked from that thread with my emuMMC that i launch via Hekate and I have no issues even on the latest firmware.

 

[johnnyb102]

But it is possible to use emuMMC with Hekate as long as you use the right patches. I use the patches linked from that thread with my emuMMC that i launch via Hekate and I have no issues even on the latest firmware.

That's true, but I noticed that Mario Bros. using the patches on that topic does not open using "fusee_secundary" from hekate where I came to the conclusion not all are compatible, using "fusee_primary" in the hekate payload works all "sigpatches". I'll study the case.

 

[Draxzelex]

That's true, but I noticed that Mario Bros. using the patches on that topic does not open using "fusee_secundary" from hekate where I came to the conclusion not all are compatible, using "fusee_primary" in the hekate payload works all "sigpatches". I'll study the case.

Those patches only work when using the fss0 method. Any other method, which would mean using fusee, requires these patches.

 

[johnnyb102]

Those patches only work when using the fss0 method. Any other method, which would mean using fusee, requires these patches.

I used this configuration below and it worked theoretically in hekate_ipl.ini

[Atmosphere - Primary Fuse]
payload=bootloader/payloads/fusee-primary.bin
icon=bootloader/res/primario.bmp

To see if it is possible to replicate in emuMMC! hehehe

 

[Draxzelex]

I used this configuration below and it worked theoretically in hekate_ipl.ini

[Atmosphere - Primary Fuse]
payload=bootloader/payloads/fusee-primary.bin
icon=bootloader/res/primario.bmp

To see if it is possible to replicate in emuMMC! hehehe

This is just the same as booting fusee_primary which boots sysMMC by default. Fusee uses bct.ini which has to be configured manually to load emuMMC unlike Hekate hence why most, if not all, guides recommend using Hekate to only setup but launch emuMMC. Just switch back to your original setup and use the patches I linked earlier

 

[johnnyb102]

This is just the same as booting fusee_primary which boots sysMMC by default. Fusee uses bct.ini which has to be configured manually to load emuMMC unlike Hekate hence why most, if not all, guides recommend using Hekate to only setup but launch emuMMC. Just switch back to your original setup and use the patches I linked earlier

Thank you very much for the information and your attention. I will try here to understand BCT.ini because I have no idea how it works to use emuMMC but I will do a research on the subject.

 

[Draxzelex]

Thank you very much for the information and your attention. I will try here to understand BCT.ini because I have no idea how it works to use emuMMC but I will do a research on the subject.

I don't understand why you're just not switching back to Hekate and the patches I linked since I've stated they work even using myself as proof.

 

[johnnyb102]

I don't understand why you're just not switching back to Hekate and the patches I linked since I've stated they work even using myself as proof.

Johnny's crazy. Hehehe.
To create 2 folders using fusee_primary and hekate I will leave it saved on my computer for make a library the methods possible.

 

[Raugo]

This is just the same as booting fusee_primary which boots sysMMC by default. Fusee uses bct.ini which has to be configured manually to load emuMMC unlike Hekate hence why most, if not all, guides recommend using Hekate to only setup but launch emuMMC. Just switch back to your original setup and use the patches I linked earlier

That is not true. fusee-primary launch emummc by default if you have the emummc.ini in the emummc folder of the SD card and the emummc correctly installed. Hekate is not needed to launch emummc.

 

[Draxzelex]

That is not true. fusee-primary launch emummc by default if you have the emummc.ini in the emummc folder of the SD card and the emummc correctly installed. Hekate is not needed to launch emummc.

I never said Hekate is needed to launch emuMMC. Its just easier to launch and setup emuMMC with Hekate as opposed to fusee which is why majority of guides utilize Hekate not fusee.

 

[Raugo]

Is more easy to setup it obviously because fusee-primary not have a option to install the emummc but to launch it have the same difficulty (none) or maybe is more easy in fusee-primary because you don't need to do anything.

 

[Loisb14]

Guys I am new to this world and it worked perfect in version 10.0.3. Thank you!!

I'm thinking of upgrading to 10.0.4 with ChoiDujour (to know if it works correctly), but everything really works well for me in the current version. do you recommend uploading to version 10.0.4?