Application halted?

Discussion in 'M3 Adapter' started by Peech, Jul 29, 2008.

Jul 29, 2008

Application halted? by Peech at 3:57 AM (1,957 Views / 0 Likes) 2 replies

  1. Peech
    OP

    Newcomer Peech Newbie

    Joined:
    Jul 29, 2008
    Messages:
    2
    Country:
    Australia
    Hello! I just recently bought an M3DS Real and a 4GB Sandisk MicroSDHC to use with it. I bought it intending to run homebrew on my DS Lite, like ScummVM and Nethack. So I set it up with the unofficial English Sakura v1.1 and I can run a few things fine - ScummVM works well, for example.

    But when I try to run some applications, I get an error and my DS refuses to work. The loading screen says a bunch of numbers and then 'Application halted!! Please refer [/SYSTEM/m3sakura/logbuf.txt]'

    So I found the .txt file in my system folder and this what it says:

    Start log file. topsector=190208 size=8192byte
    AppName M3Sakura firmware Version 1.10
    May 30 2008 01:37:17 GMT+09:00
    ARM RVCT3.1 [Build 569]
    __current pc=0x02001284 sp=0x02803da0
    extmem: Not found extend memory.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/M3SAKURA.DAT
    IRQ jump table.
    adr=0x1ff020c trig=1
    adr=0x1ff0260 trig=10000
    ----------
    Shell_FAT_fopen_LanguageInit=/SYSTEM/M3SAKURA/LANGUAGE.SET
    Setup default code page is '932'.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/LANGUAGE/CHRGLYPH.932
    FreeMem=2949120byte
    mainloop.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/LANGUAGE/MESSAGES.932
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/SPLASH.ANI
    Initialize random seed.
    extmem: Not found extend memory.
    Open setting file. [/SYSTEM/m3sakura/M3SAKURA.DAT]
    DataSectorIndex=190272.
    Load settings.
    Setting load from file.
    Load launch data '/SYSTEM/m3sakura/LAUNCH.DAT'
    launch data load from '/SYSTEM/m3sakura/LAUNCH.DAT'.
    Add launch file. [CHECKD~1.NDS]
    Add launch file. [IMAGEV~1.NDS]
    Add launch file. [MOONSH~1.NDS]
    Add launch file. [MORNIN~1.NDS]
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/RESUME.DAT
    ResumeDataSectorIndex=190336.
    Backlight set to 2.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/SWAPFILE.$$$
    Plugin Read headers.
    prf data=0 37164us
    Plugin Registed. (24x12byte)
    Check current path. [/SYSTEM/m3sakura]
    finded. [/SYSTEM/M3SAKURA/]
    Set skin.
    SkinFile_Check(...);
    Shell_FAT_fopen_FullPath=/SYSTEM/SKINS/MOONLI~1.SKN
    SkinFile_Close();
    extmem: TopAddr= 0x0.
    extmem: TermAddr= 0x0.
    SkinFile_Open(...);
    Shell_FAT_fopen_FullPath=/SYSTEM/SKINS/MOONLI~1.SKN
    Header size=0x1778
    Load color table. [colortbl.ini]
    FreeMem=2910208byte
    Set NextProc.
    FileExistsUnicode: Not find Unicode file item. [defaultn.nds]
    Allocated memory information.
    idx=0 adr=0x0212c648 size=384 locked.
    idx=1 adr=0x0212f850 size=8192 locked.
    idx=2 adr=0x02131868 size=8192 locked.
    idx=3 adr=0x02133880 size=6144 locked.
    idx=4 adr=0x0212c7f8 size=2048 locked.
    ------------------
    Restart resume.
    Used stack size 2932byte.
    Total stack size 11796byte.
    Event loop...
    Wait for key releases.
    Bookmark initialize.
    FileExistsUnicode: Not find Unicode file item. [logbuf.bkm]
    Bookmark initialized.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/TEXTFONT/FONT14.GLW
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/SWAPFILE.$$$
    extmem: Not found extend memory.
    Start DFS swap file mode.
    CreateBurstList.
    Index=0 Sector=0x32f40 Count=32768
    Index=1 Sector=0xfffffff Count=0
    FreeMem=2189312byte
    Shell_FAT_fopen_Split=/SYSTEM/M3SAKURA/LOGBUF.TXT
    pbuf=0x021e51b8, bufsize=8192byte.
    FreeMem=2181120byte
    errcnt_ANSI= 0.
    Detected text encode is Ansi8bit.
    Detected return code is LF.
    Total lines count is 275.
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/TEXTFONT/FONT14.GLF
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/BGBMP.DAT
    Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/BGBMP.DAT
    FreeMem=1028096byte

    Could anyone help me out? I've tried this with NethackDS v1.17 and Tales of Dagur with the same results. Is it a problem with my MicroSD, or have I got a faulty card reader, or does this stuff just not work on Sakura...? I haven't got a clue! Sorry if this issue has been resolved before, but I can't find anything helpful on the forums about it. I'm hoping I'm just being stupid and there's some kind of obvious fix. Thank you! =)
     
  2. lilaznkilla

    Member lilaznkilla GBAtemp Regular

    Joined:
    Jun 24, 2007
    Messages:
    141
    Country:
    Australia
    Its the sakura firmware, either try using FlashcartOS to launch the rom or get the M3 Triple boot firmware and use the itouch or the M3 REAL firmware to launch it.
     
  3. Peech
    OP

    Newcomer Peech Newbie

    Joined:
    Jul 29, 2008
    Messages:
    2
    Country:
    Australia
    Thank you very much! Most of my files are now working with the M3 Triple boot firmware.

    Problem solved. [​IMG]
     

Share This Page