Hacking 9.2 Upgrade for Plailetcs

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
Hi Just starting to do the Plailetcs guide.
I need to upgrade to 9.2 first and am on step 10 of the upgrade guide using RXtools.
https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
I have on old 3ds with 4.5.0-8E I get to step 10 and try the Health and Safety Dump.
I get the message: APP0 not found or fragmented. It fails the dump.
Any help most gratefully appreciated!
 

Davidosky99

Eevee :3
Banned
Joined
Jun 7, 2015
Messages
2,581
Trophies
0
Age
24
Location
Porto
Website
www.davidosky99.xyz
XP
1,159
Country
Hi Just starting to do the Plailetcs guide.
I need to upgrade to 9.2 first and am on step 10 of the upgrade guide using RXtools.
https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
I have on old 3ds with 4.5.0-8E I get to step 10 and try the Health and Safety Dump.
I get the message: APP0 not found or fragmented. It fails the dump.
Any help most gratefully appreciated!
You did your FBI injection with FBI right?
You might be a bit unlucky now

"Validation Stage 1: SUCCESS" and "Validation Stage 2: FAILED"
This will happen due to having a fragmented NAND (caused by various things such as rxTools' shitty FBI injection or some Gateway software). OTPHelper cannot check the files of a fragmented NAND, but if you got "Validation Stage 1: SUCCESS" then "Validation Stage 2: FAILED" will rarely be an anything but a false positive.

You can either flash to SysNAND at your own risk, or attempt to defragment your NAND by using Decrypt9 to dump your CTRNAND partition, then mounting it on your computer using something like OSFMount and defragging that mounted CTRNAND using something like Defraggler.
https://github.com/Plailect/Guide/wiki/Troubleshooting
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
No I am at the stage I am at Ive not had to use the FBI yet.
(Stage 10)
Should I have a cartridge in the 3ds or not?
Sorry to be a pest
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
Nope never injected FBI using RXtools.Do I need to?
I've done a system format before I started the procedure as it seemed sensible.
 
Last edited by yossii,

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
Just tried again here is a dump for the error log if that is any help:

Initializing SD card... success
sector0x96 Key: otp.bin not found
0x03 KeyX & KeyY: already set up
0x25 KeyX: already set up
0x18 KeyX: not found
0x1B KeyX: not found
Finalizing Initialization...

Initialization: partially failed

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Press B to return, START to reboot.

Does this help?
 

Davidosky99

Eevee :3
Banned
Joined
Jun 7, 2015
Messages
2,581
Trophies
0
Age
24
Location
Porto
Website
www.davidosky99.xyz
XP
1,159
Country
Well, if it keeps failing you can try injecting FBI from rxtools itself(I wouldn't recommend this unless I would see this wouldn't work any way else, and I'm not sure you can use another console's hs.app) . on 9.2 you might have more luck dumping it and injecting a newer FBI.
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
I was/am a but nervous about doing the Plailect guide.
Perhaps simple is better ;)
Thanks fella super grateful for your time and help.
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
I've come back for another shot at this.
Would formatting my emunand before I start help? I can do this using my old Gateway kit?
 

grafate

Well-Known Member
Member
Joined
Jan 30, 2016
Messages
104
Trophies
0
Age
38
XP
148
Country
United States
I've come back for another shot at this.
Would formatting my emunand before I start help? I can do this using my old Gateway kit?

If you have a fresh SD to use go and format that fresh SD fat 32 with the largest cluster size available. Then try again and see if it works for you this time.
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
Nope no joy :(
Fresh SD card.
Formatted the SD card (System Settings, Other Settings, Format System Memory)
Re downloaded the files and put them on (only the files specified from the webpage) followed the instructions:
Still getting:

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Any ideas most gratefully received!
 

grafate

Well-Known Member
Member
Joined
Jan 30, 2016
Messages
104
Trophies
0
Age
38
XP
148
Country
United States
Nope no joy :(
Fresh SD card.
Formatted the SD card (System Settings, Other Settings, Format System Memory)
Re downloaded the files and put them on (only the files specified from the webpage) followed the instructions:
Still getting:

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Any ideas most gratefully received!

Sorry I should of been more clear then. You format the SD card in your PC. The system format in 3DS settings only resets the folder on the SD.
 

yossii

Member
OP
Newcomer
Joined
Dec 18, 2007
Messages
19
Trophies
0
XP
209
Country
No that's what I did I re formatted to fat32 making sure I used the largest amount of cluster size. Copied the required files to the ad card.
I then formatted the 3DS.
Then I tried the decrypt9. Same problem :(
Ive even just gone out and gotten a new memory card to see if that made a difference!
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • Xdqwerty @ Xdqwerty:
    also gonna install twilight menu in my r4 flashcard
  • Psionic Roshambo @ Psionic Roshambo:
    One thing that just occurred to me.... The sound on the 2600 sucked less back then the harsh sound we hear now is from infinitely better speakers we have now, back when the 2600 was new speakers produced a almost muffled sound, like CRTs made old graphics look slightly better.
  • Psionic Roshambo @ Psionic Roshambo:
    I wonder if I could recommend that to some emulation devs that perhaps the sound could use some smoothing out to simulate those old TVs
  • Psionic Roshambo @ Psionic Roshambo:
    I think a few of the early systems could benefit from that, at least up to the 8 bit generation, by the 16 bit generation I think TVs had gotten a lot better in almost every way
  • Xdqwerty @ Xdqwerty:
    i dont have an sd card adapter but I have an usb sd card adapter
  • K3Nv2 @ K3Nv2:
    Old people games
  • Xdqwerty @ Xdqwerty:
    its not the one that comes with the r4
  • Xdqwerty @ Xdqwerty:
    doesnt work (my flashcard is from r4isdhc.com)
  • Xdqwerty @ Xdqwerty:
    might install ysmenu first
  • Psionic Roshambo @ Psionic Roshambo:
    Try Wood firmware
  • Psionic Roshambo @ Psionic Roshambo:
    For your R4
  • Psionic Roshambo @ Psionic Roshambo:
    It's old but it's the best firmware out for DS stuff
  • Xdqwerty @ Xdqwerty:
    it says it only works for the original R4, R4i Gold (r4ids.cn), R4iDSN (r4idsn.com) and Acekard R.P.G.
  • Xdqwerty @ Xdqwerty:
    nvm it does support mine
  • Xdqwerty @ Xdqwerty:
    but why choose it over ysmenu @Psionic Roshambo?
  • Xdqwerty @ Xdqwerty:
    bc im stupid?
  • Xdqwerty @ Xdqwerty:
    yea ik im stupid
  • Xdqwerty @ Xdqwerty:
    good night
  • Psionic Roshambo @ Psionic Roshambo:
    Just give it a try, but honestly if you have a 3DS you can play DS games without a card just off the internal SD card
  • Psionic Roshambo @ Psionic Roshambo:
    Slightly slower loading but a bit more convenient
  • BakerMan @ BakerMan:
    guys, my fuckin headphones have an out of place speaker
  • K3Nv2 @ K3Nv2:
    Did you try wearing them?
    B @ btjunior: @Xdqwerty 16