1. TobiasAmaranth

    TobiasAmaranth GBAtemp Fan
    Member

    Joined:
    Feb 6, 2009
    Messages:
    366
    Country:
    United States
    Just got a new SD card (32gb, woot!) and I want to copy my Gateway EmuNAND to the new card so that I don't lose all my stuff. How do I best do that?
     
  2. ZacharyAlkaff

    ZacharyAlkaff Advanced Member
    Newcomer

    Joined:
    Jun 30, 2015
    Messages:
    73
    Country:
    United States
    Is there a way to backup nand on old3ds fw 10.0 and is anyone planning to released it.
     
  3. madmax2

    madmax2 Advanced Member
    Newcomer

    Joined:
    Jan 14, 2016
    Messages:
    63
    Country:
    anyone know why reinand 3.1 locks up a splashscreen?

    and how to fix this?
     
  4. melibios

    melibios Member
    Newcomer

    Joined:
    Jan 9, 2016
    Messages:
    23
    Country:
    I asked this in the tutorial thread, but I hope re-posting it in another one in hopes of getting an answer sooner wouldn't hurt.

    Will I be freely able to switch into a different SD card after I've gotten menuhax's autoboot working? I'll soon get an extra card, but I expect to encounter some sort of error once I pop it in and attempt to install cfw from scratch, once again...am I just imagining that "error"?
     
  5. Arithmatics

    Arithmatics I'll be holding on to you. ;}
    Member

    Joined:
    Jan 29, 2009
    Messages:
    1,152
    Country:
    Malaysia
    If i recall correctly you'll need to reinstall menuhax with each new sd card because it's linked to emunand which is linked to your sd card. I ran across this error before. Not sure sbout now though because i'm safely set up on a 128gb mem card
     
  6. melibios

    melibios Member
    Newcomer

    Joined:
    Jan 9, 2016
    Messages:
    23
    Country:
    So reinstalling is all that has to be done, and menuhax is the only 'thing' affected, yes? Thanks, that's actually all I wanted to know.
     
  7. madmax2

    madmax2 Advanced Member
    Newcomer

    Joined:
    Jan 14, 2016
    Messages:
    63
    Country:

    I think you need to backup old mem card.

    On new SDcard
    Create new emunand partition with emunand9

    copy all data from old mem to new mem card
    then restore emunand.bin to new card

    Then everything should work
     
  8. melibios

    melibios Member
    Newcomer

    Joined:
    Jan 9, 2016
    Messages:
    23
    Country:
    Oh thanks, I know about exporting but I'll save that in my notes anyway. I'll still be using the old SD, and there's no issue in needing to transfer anything thus far, so I'm good.
     
  9. Kalta

    Kalta Newbie
    Newcomer

    Joined:
    Jan 25, 2016
    Messages:
    4
    Country:
    I have a new 3ds XL with RXtools emunand firmware 9.2 installed so i can install and load my games from the homescreen.

    So i wanted to play with some amiibo, unfortunately it appears 9.2 firmware doesnt support amiibo.

    Is there a way to upgrade to a custom firmware that supports amiibo? How would i do this?

    Otherwise is there a way to get NFC support on my current firmware? or is there a better way to get this?

    Thanks
     
  10. fr3quency

    fr3quency GBAtemp Advanced Fan
    Member

    Joined:
    Jan 11, 2016
    Messages:
    805
    Country:
    Greece
    Hello everyone. When I bought my 64GB SDXC SDcard, I used a program to format it from exFAT to FAT32 so that the O3DS supports the SDcard. I had selected 64KB allocation size back then.
    When I created my emuNAND using EMUNAND9 HomeBrewLauncher App, it formatted the whole SDcard so I guess the 64kb allocation size I had chosen is now gone and I guess it has the stock allocation size of the EMUNAND9 app(which I don't know how small/big it is; my guess is small).

    So the question is, is there something that I can do to change it back to 64KB? I can backup my SDcard and make a NAND.bin backup of my emuNAND; these are not problems. The problem is the program that I'm going to use since it might delete the ~1GB reserved partition for the emuNAND and if I use EMUNAND9 again, it will change the default allocation size(which I want to be 64KB). Any ideas? Thanks a lot!
     
  11. Ruben Burgt

    Ruben Burgt Member
    Newcomer

    Joined:
    Oct 20, 2015
    Messages:
    30
    Country:
    Netherlands
    Thanks man. It worked. Now I can continue playing the game without the card.
     
    BobDoleOwndU likes this.
  12. Clydefrosch

    Clydefrosch GBAtemp Guru
    Member

    Joined:
    Jan 2, 2009
    Messages:
    5,825
    Country:
    Germany
    right now, is there a way for 10.3 consoles to download from eshop without up- or downgrading?
     
  13. Typhin

    Typhin GBAtemp Fan
    Member

    Joined:
    Jan 30, 2008
    Messages:
    305
    Country:
    United States
    My other roommate is also getting the "cannot be used" message with the browser, but he's on 10.3.0-28U and has used the browser in the past. Is there an issue with TubeHax preventing the browser from functioning at all, now? Or is there something I'm completely missing? The only steps I took with the second system are:

    - Set the DNS settings to use TubeHax's DNS server.
    - Copy the Homebrew Starter Pack to the SD card
    - Start the browser and select Initialize Save Data
    - Restart the browser to initialize new data
    - Close the browser, activate the camera, scan the QR code to go to the browserhax site
     
  14. AceEvo55

    AceEvo55 GBAtemp Regular
    Member

    Joined:
    Nov 3, 2015
    Messages:
    181
    Country:
    Canada
    Edit: question was answered!
     
    Last edited by AceEvo55, Jan 25, 2016
  15. HarEllis6202

    HarEllis6202 GBATemp OldFag
    Member

    Joined:
    Feb 19, 2015
    Messages:
    521
    Country:
    United States
    hi everyone quick question, i have a o3ds using menuhax and rxtools emunand autoboot can i just copy the sd card files and extract and burn the emunand on a bigger sd card with no headaches?
     
  16. Daidouji

    Daidouji GBAtemp Regular
    Member

    Joined:
    Jan 18, 2016
    Messages:
    124
    Country:
    Mexico
    Ok so here it goes. I hope this is not the incorrect place to ask xD

    I know 10.4 is now out and that browserHaxx is out of question. A friend of mine has a N3DS and he was sitting in 9.5 sysNand... he wanted to install CFW and such to it. I pointed him to the correct tutorials that I used to hack my own console and asked him to wait for us to meet so I could help if something went wrong.

    He got impatient (got busy with family matters this weekend) and he started the downgrade guide. The thing is that guide if you are not on 10.3 will surely fail while doing the downgrade and will result in a partial downgrade (it happened to me on two consoles I've already downgraded... mine was on 10.3 so it went smoothly).

    He tried calling me but since I was busy I wasn't able to answer him... the only thing he had to do was start the 3DS WITHOUT the microSD card on it and I will boot into a partially downgraded sysNAND... run browserHaxx again and attempt another downgrade procedure and that would make it a complete downgrade ( I did this with 2 consoles already and they are now running reiNAND 3.1 with 10.4 on Emunand and 9.2 Sysnand) but since this guy never looked for info and such he just did an "emergency recovery" pressing L + R + A + D-UP and "recovered from a bricked device" and well it updated to 10.4 now so he is literally screwed from any downgrades.

    The question is... this guy has a physical copy of Cubic Ninja... so I want to know if we can use it as an entry point for HBL and then attempt a 9.2 downgrade again from there?

    I've already told him he must WAIT until 10.4 gets a new entry point but I just wanted to know if downgrading from 10.4 to 9.2 is possible.

    Thanks for your time and help everyone =)

    — Posts automatically merged - Please don't double post! —

    https://gbatemp.net/threads/how-to-transfer-emunand-to-another-sd-card-working-on-new3ds.383684/ use this Tutorial =)
     
  17. HarEllis6202

    HarEllis6202 GBATemp OldFag
    Member

    Joined:
    Feb 19, 2015
    Messages:
    521
    Country:
    United States
    i am not an expert but to my knowledge there is alot that goes into having a kernel exploit work properly, maybe if he gets lucky like my friend and gf that i told not to update 6 months ago then something will come but right now i think we need memchuckhax2 or whatever they are calling it to function properly before sysupdater will be made again unofficaly for 10.4. you are right though right now 10.3 is safe to downgrade from but other fw is a bad idea
     
  18. Daidouji

    Daidouji GBAtemp Regular
    Member

    Joined:
    Jan 18, 2016
    Messages:
    124
    Country:
    Mexico
    That's what I wanted to know! so memchunxhax2 got patched eh? Well then sysUpdate will just hardbrick his console hahaha thanks a lot for that answer.
    As I told him he will have to be a sitting duck until a new exploit is found or I'll just suggest him to sell that console and get a new one... most of the ones sold on my country have 9.5 out of the box.
     
  19. HarEllis6202

    HarEllis6202 GBATemp OldFag
    Member

    Joined:
    Feb 19, 2015
    Messages:
    521
    Country:
    United States
    well in the usa i had a black o3dsxl and i traded it into gamestop once i updated and my hardmod wouldnt stay soldered in lol they gave me 100$ when i only spend 120 through nintendo. in my specific state we have alot of 2ds,n3dsxls that should be hackable. he could wait but if he wants cias and the like trading it in for another system is just quicker of course.
    and just so you know i used sysupdater to update from 8.1 to 9.2 and 9.9 to 10.3 with no problem so you should be able to upgrade a 9.5 unit.good luck to your friend
     
    Last edited by HarEllis6202, Jan 25, 2016
  20. Daidouji

    Daidouji GBAtemp Regular
    Member

    Joined:
    Jan 18, 2016
    Messages:
    124
    Country:
    Mexico
    Thanks m8! ANd well yeah... he will mostly try to trade it for another one of just sell it and buy a new one... Although we don't have GameStop here xD but it's ok... I guess someone will be willing to pay for the console and use it with legit stuff... since he indeed wants to use cias and such... he as me... wants to CFW it for Monster Hunter X :P
     
    Last edited by Daidouji, Jan 25, 2016
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - questions, PARADISE,