Hacking 3DS NOOB PARADISE - Ask questions here

[KunoichiZ]

ohhh so one QR code scan will allow me to download a handful of games? thanks!

It doesn't download any of them. It only shows you them. You have to download them yourself.

 

[Flora Cherry]

anyone can help me i can get the nand with a r4 3ds rts my 3ds is in version 11.0 ? yes or no ?

 

[KunoichiZ]

anyone can help me i can get the nand with a r4 3ds rts my 3ds is in version 11.0 ? yes or no ?

No, you cannot dump your NAND with an R4 or any kind of flashcart.

 

[Beebz]

It doesn't download any of them. It only shows you them. You have to download them yourself.

OHH so I have to download the games as a CIA from a different website and then get the QR code so they show up in free shop and then I will be able to play them>?

 

[KunoichiZ]

OHH so I have to download the games as a CIA from a different website and then get the QR code so they show up in free shop and then I will be able to play them>?

No, you download the games directly from freeShop. You don't need to download them from any place else unless freeShop doesn't have the game. :/ Scan the encTitleKeys.bin QR code, choose a game, download the game, play the game, enjoy.

 

[gnmmarechal]

You might be using it incorrectly.
First off, ctr-httpwn isn't compatible with Menuhax due to how the exploit needs to return to the home menu. You'll need some other entrypoint like a software title exploit or browserhax. Steelhax is probably your best bet for now.
Second, is that after you've run the exploit, from the homebrew launcher you press Start, and then X to return to the home menu without restarting your system.

Not entirely correct. It is only incompatible with the sdiconhax variant of MenuHax.

Sent from my Motorola DynaTAC 8000x using Tapatalk

 

[Beebz]

if I have a VC inject game that turns out to not work how do I delete it? I always choose the install & delete option so what is there left to delete so it is off my home screen?

 

[eenyuheye8o8]

I need help with my N3DS I successfully downgraded I think I still can't check because I can't access HBL on the N3DS anymore after the system transfer. It was a N3DS 11.0.0 33U and I am using freakyhax as my entry point. It would be fire the transfer because I had to use Ctr-httpwn so I could trash fee since the current firmware is 11.1.0. So I successfully transferred downgraded using fieldrunners and dgtool. But each time now I run freakyhax I get a top red screen bottom black. I tried switching the otherapp.bin to a 10.4.0 29, 11.0.0 33 using other app and Robpin. Replacing the freakyhax files and it keeps happening. I cannot do browser exploit either. Could someone shed some light on me please!!

 

[Beebz]

Is there a way to stretch VC inject games to fullscreen?

 

[kylster]

So I'm ready after much preparing I have my o3ds ready to go.
Currently on 10.7 and I have Cubic Ninja.

I would like to know which task should I perform first:
installation of a9lh
downgrade to fw 9.2
install luma3ds

Also I was looking a 3 different guides each with their own purpose:
https://www.reboot.ms/forum/threads/downgrade-3ds-10-7-10-6-to-9-2.2008/
https://gbatemp.net/forums/3ds-tutorials.234/
https://gbatemp.net/threads/luma3ds-noob-proof-3ds-custom-firmware.411110/

Need some advice on where to start and is a 2GB sd card good enough?

 

[Quantumcat]

I would like to know which task should I perform first:
installation of a9lh
downgrade to fw 9.2
install luma3ds

The second two are contained within the first one. Don't do any of the guides you linked. Only follow https://github.com/Plailect/Guide/wiki

You can also download the guide and files required from my page quantumc.at

 

[kylster]

The second two are contained within the first one. Don't do any of the guides you linked. Only follow https://github.com/Plailect/Guide/wiki

You can also download the guide and files required from my page quantumc.at

Thank you. I'm going to attempt my luck here and love the avatar btw.

 

[Quantumcat]

Need some advice on where to start and is a 2GB sd card good enough?

You will have an easier time with a 4GB+ card (I'm not certain but I think with a 2GB card your data may be lost because you won't have room to make a backup and will have to restore using the 9.2 CTR transfer)

And thanks :-)

 

[kylster]

Question about the process of this guide so far. I'm following the guide on this page https://github.com/Plailect/Guide/wiki/Part-2-(2.1.0-ctrtransfer)

At the end of Part 1 it directed me to boot into Decryt9 which I'm currently in right now but the beginning of Part 2 informs me that I need to have an additional file on my sd card in order to make use of this application. Is it safe to turn reboot to main menu and power off the console?

 

[Quantumcat]

Question about the process of this guide so far. I'm following the guide on this page https://github.com/Plailect/Guide/wiki/Part-2-(2.1.0-ctrtransfer)

At the end of Part 1 it directed me to boot into Decryt9 which I'm currently in right now but the beginning of Part 2 informs me that I need to have an additional file on my sd card in order to make use of this application. Is it safe to turn reboot to main menu and power off the console?

Yes

 

[kylster]

Back to the guide I'm following on https://github.com/Plailect/Guide/wiki/Part-3-(arm9loaderhax)
At right before this step I was booted into a black screen like it depicted. However upon pressing the power button it already on the Luma3DS v6.2.3 configuration screen. Should I continue or what should I do at this point sine I didn't backu my OTP.bin file.

1. Copy your console specific OTP.bin from the /a9lh/ folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 2.1.0 3DS
   1. Copy your console specific OTP.bin from the /a9lh/ folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 2.1.0 3DS

 

[Quantumcat]

Back to the guide I'm following on https://github.com/Plailect/Guide/wiki/Part-3-(arm9loaderhax)
At right before this step I was booted into a black screen like it depicted. However upon pressing the power button it already on the Luma3DS v6.2.3 configuration screen. Should I continue or what should I do at this point sine I didn't backu my OTP.bin file.

1. Copy your console specific OTP.bin from the /a9lh/ folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 2.1.0 3DS
   1. Copy your console specific OTP.bin from the /a9lh/ folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 2.1.0 3DS

Nothing bad should happen if you don't copy it now, however, copy it over before any steps that erase your SD card (like anything to do with emuNANDs or formatting).

 

[djalmafreestyler]

If I have a 9.2 NAND backup of my 3DS, if I make a hardmod can I install my 9.2 backup?

 

[Quantumcat]

If I have a 9.2 NAND backup of my 3DS, if I make a hardmod can I install my 9.2 backup?

Yes

 

[kylster]

Guide https://github.com/Plailect/Guide/wiki/Part-3-(arm9loaderhax)

I assume at this point in the guide where I have to restore my system I have A9LH? The guide recommends that I Update using the system's update. From what I read I should remain on 9.2 correct? or is there some benefit to being on 11+?

From what I can tell I have no backup of 9.2.