Charging problem is usually the mt92t36 chip but if charging and not turning on its the pi3usb usually
auto
If there's a short then remove the chip and if the short is gone then that's your problem
I took the USB-C port off to see if that solved the short. The port was soldered correctly. The short on the cap still remains. I have removed the motherboard. I have fixed heaps of PS4s so it basically the same as the HDMI ports on them. I will check the chokes (filters) for any earths and if...
Only 1 shorting out is the 1 circled. I take it that is pin#6. So would this mean the PI3usb needs replacing. Or could it be the new usb-c shorting it out.
Thanks for you help
auto
Getting 2.45v on the fuse
Thank You so much for the info. Which do you mean on the M92t36 ?. Could it be the hidden pins on USB-C port aren't connected properly ?
auto
Voltage to the fuse 2.26v and same the other side using original nintendo charger
Hi. Any help please. Brought a Switch that had bent pins in the usb-c. Replaced the port and still will not turn on. The M92t36 chip gets warm. The BQ24193 chip is quite hot. Console will not turn on. Tried and battery with charge and won't power on either.
Any ideas would be greatly appreciated.
Hi could anyone give me some info or better still where I could get 1 of these chips from. I brought a broken switch and this chip appears cracked. Thank In advance
Brought a Switch and the right joycon doesn't work. Disassembled it and someone had melted the motherboard connector. Is there anywhere I can buy z new connector or does someone have the pinout for it so I can solder wires to the rail. Thanks in Advance
I brought a faulty switch and the right joycon connector has been melted when they have replaced the battery ic. Is there anywhere you can buy them or any alternatives to connect it ? Thanks in advance
Anyone know if or where you can get a replacement right joy connector from. Brought a switch and they have melted it replace battery if. Thanks in advance