Search results

  1. Crossfader

    Hardware No Display but Dock works

    No, note the following thread. https://gbatemp.net/threads/dock-mode-only.567345/
  2. Crossfader

    Hardware Dock mode only

    I have Same Probleme, in Dock Mode the Switch works. The Connector is new soldered and the backlight is on. I tested the connection in Diode Mode and 3 Values shown as OL. Where are these Contacts going?
  3. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Hi and sorry for the delay. I check and re-solder the caps and the P13USB again, but short is still there. Charging works only in one direction. I found out that the ESD Protektion 7C is blown, i replace it with a new one. I check the 2 ESD chips with my Multimeter in Diode Mode and become...
  4. Crossfader

    Hardware No Display but Dock works

    Nope, Backlight is on.
  5. Crossfader

    Hardware No Display but Dock works

    No, i will check the connector pins in Diode Mode.
  6. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    I swap the P13USB with a new one, but the same result. Nothing on the TV, only the green light on the Dock is on.
  7. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    I solder a new P13USB tomorrow, i check the pins 35-38 in diode mode and all measurements are OK. PS: Thanks for your help and tips :-)
  8. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Because it won't dock. After that I found the groundet caps.
  9. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Yes auto This Cap is also short to ground.
  10. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    I only removed the P13USB and put him back on the Board.
  11. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    M92T36 = 29 Ohm P13USB = 28 Ohm
  12. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Hi, I check the filters and all have continuity. It is so strange, why do the switch work in handheld mode? When the SOC is defective, why boot the switch? I desolder the P13USB to see if the short is gone, after that I resolder it. Where is the 3v3 line?
  13. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Hi, I check the filters and all have continuity. It is so strange, why do the switch work in handheld mode? When the SOC is defective, why boot the switch?
  14. Crossfader

    Hardware Multiple shorted caps near P13USP, M92T36 and ALC5639

    Hi, i have the same shorts after repair a USB-C Port and replace the "7C" ESD Protection. The Switch is starting and working but only in Handheld mode. Dock Mode dosent work, only the Green Indicator LED is on. What the heck is this?
  15. Crossfader

    Hardware failed to init emmc

    Yes, this is the one :-) Thanks so much!
  16. Crossfader

    Hardware Components used on the Switch (mostly the motherboard and main console)

    I need the EMMC FPC Connector, but i cant find it on the web.
  17. Crossfader

    Hardware failed to init emmc

    Where can i get a EMMC Socket? Mine has bent Pins.
  18. Crossfader

    Hardware No Display but Dock works

    The Connector is new from Ali and no Pins bent. The Chokes have continuity.
  19. Crossfader

    Hardware No Display but Dock works

    Hi at all. I have a Switch with no displaying anything. The Switch boots up and the Touchscreen works fine, you can her the unlocking by clicking. In the Dock the Switch works normal. I got the Switch as water damage, so i clean it with IPA, there was very tiny bits of corrosion. During...
  20. Crossfader

    Hardware Joycon leds not working properly

    Flexcable are broken.
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=qyBmc3-J5AM