Search results

  1. R

    Switch OLED. The fan is not working and joycons are not charging

    remove the diode. if its the same as first gen switches. (i have no idea) it was located near the power button fpc/fan fpc on older switches
  2. R

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    Here's my 2 cents. A switch will hang on the switch logo when there's something wrong with the Wi-Fi chip (i wish m92 did this too but I've never had that) on this note it can be very slow on this splash screen but boot but you'll notice you don't have Bluetooth or Wi-Fi. a short or something...
  3. R

    Is Switch Lite OK for BothW?

    motion control bow as well in zelda
  4. R

    I have a Nintendo Switch. Is it worth getting also a lite one?

    i actually prefer the lite over the main switch, but i think nintendo should make a companion base unit for tv, no lcd etc,
  5. R

    Switch Lite ZL always "pressed" (high resistance against GND)

    i dont think ill be able to help, you seem to know what your doing more than me. if you connect a separate joycon via bluetooth does it let you press the trigger? ( not sure why im asking that im just curios
  6. R

    Switch Lite ZL always "pressed" (high resistance against GND)

    i dont really know. the closest thing ive had is, when i pressed a certain button (think it was one of the triggers) the console would enter sleep mine was corrosion. and it fixed it. id personally test with a different daughter board, and inspect the zifs on the main board/ make sure those...
  7. R

    Did i broke this nintendo 3ds pcb?

    i dont understand why you cant just clean up the pads and install a new port.
  8. R

    Hardware Identifying the component on the Nintendo motherboard

    what voltage do you get at both sides off the resistor circled. and at pin 6 of m92. ngl, I'd probably use the tronicsfix forum for help. you seem to have changed the MOSFETs but did you test m92t36 to make sure that was working?
  9. R

    Hardware Help Switch lite. L trigger puts console into sleep mode.

    apologies for the late reply. yeah i fixed this issue, it was corrosion, so the daughter board needed a good clean
  10. R

    Hardware Identifying the component on the Nintendo motherboard

    thats not a diode its the current sense resistor ( fuse) that hardly ever blows its like my mrs. inspect bridge pins inside usb c port, and comfirm the work you have done is correct
  11. R

    old 3ds dim screen

    ive only seen this when the blacklight is broken in the top screen, i normal use a smashed screen and pinch the blacklight from it. i cant remember the 3ds mobo, but possiblily a buck regulator not boosting the voltage for backlight i would also swap out the flex cable for a speakers, if you...
  12. R

    Hardware switch only charging at 0.43 amps help needed thanks

    I was the original poster for this question and I think your right. if I don't have a reading in diode mode on that filter or the data lines on the usb c port. i can enter rcm on some switches and wired usb accessories don't work. i even think via a pc. the switch will say unable to charge...
  13. R

    Hardware Nintendo switch no TV output (diagnose done)

    thats related to the data lines. was it getting a shirt across?
  14. R

    Switch OLED with HWFLY Lite battery drain

    ive no idea about if the chip is causing drain. ive had a switch battery drain when off, (water damaged) i fixed it reflowing cpu another switch lite, the fan spins at full speed when off, but works perfectly in sleep and standby. ( need to relook at this) with the joycon doing that, ive only...
  15. R

    Hardware PS VITA (3G) Battery Drains Quickly

    if you have a multi metre check if anything is getting voltage when off. i only say this because i had a switch lite which works perfectly on and in sleep. but turn it off and the fan spins at full speed and the cpu is stone cold. i had another switch lite with battery drain when off< and i...
  16. R

    Hardware Switch charges and docks fine but not detected by PC in RCM mode

    did you ever fix this issue. I have similar o a unpatched switch. well two of them. it's probably my trace repair under the usb c port , but docks and charging both sides of port. replace now twice now aswell
  17. R

    Hardware Switch won't connect to PC in RCM Mode

    sorry for digging up a old thread. but I wanted to say I have 2 switches which are unpatched and don't enter rcm. Via pc and phone. I have a sx OS dongle. can I install the newer payload for fusee on that?
  18. R

    Hardware New M9T36 Replacements Shorting, Any Ideas?

    More than likely it was the p13usb I replaced as where I always go to after m92. when i changed the m92 orignallly it worked for a day then threw up a error code AGAIN
  19. R

    Hardware New M9T36 Replacements Shorting, Any Ideas?

    somthing relating to pi3usb, i had a switch which blew m92 twice, i did something with p13usb and that fixed my issue, cant remmeber if it was the chip i replaced or the filter/caps.
  20. R

    Hardware Swapping parts from V2 into V1

    I notice sellers on Ali express list the game reader different on v1 and V2 but I have no idea if there different?
General chit-chat
Help Users
  • No one is chatting at the moment.
    straferz @ straferz: Anybody know why this is happening to my ACWW town...