Search results

  1. bombob

    Nintendo Switch USB C Fix New Repair Method

    I am kinda late to the party but it seem to have sold out and they don't reply to emails and inquiries. is the project dead?
  2. bombob

    Hardware Cant boot RCM with LCD screen connected

    this I havent tried auto Wil let you know later
  3. bombob

    Hardware Cant boot RCM with LCD screen connected

    I tried 3 screens.with lcd only it shuts down. With backlight only it flashes then shuts down. With lcd and backlight it shuts down. without lcd and backlight it stays connected on the tegraRcmGUI it seems like an power issue, like a bad cap or failed component at the power management but cant...
  4. bombob

    Hardware Cant boot RCM with LCD screen connected

    Hello I have a nintendo switch board that have been worked on (not by me). It will load any rcm payload but not with the lcd or the backlight ribbon connected. with only the backlight connected it would just flash for a second and shutdown right away. With both lcd and backlight there would be...
  5. bombob

    Hardware Nintendo switch - no power - goes to 15V 0.49A direclty

    I read the emmc on another switch using Hekate. But wanted to test the actual switch for continuity to the emmc socket. it wasn't worked on before. It was all dusty when I opened it and the screws had no marks.No fingerprints either
  6. bombob

    Hardware Nintendo switch - no power - goes to 15V 0.49A direclty

    Ok ,tried ion a non patched switch and it reads the emmc with all partitions. Now I am gonna have to check the connections on the board for the emmc socket. Is there a pinout out there like those for the sdcard socket?
  7. bombob

    Hardware Nintendo switch - no power - goes to 15V 0.49A direclty

    Never knew about it but thanks for the headsup. I will let you know
  8. bombob

    Hardware Nintendo switch - no power - goes to 15V 0.49A direclty

    Starting it would corrupt the patched nand?
  9. bombob

    Hardware Nintendo switch - no power - goes to 15V 0.49A direclty

    Sorry to bump an old thread but has this ever been resolved? I have a similar issue with a device(draws 15v). Get recognized in tegrarcmgui (sends payload but is probably patched) but doesn't power on. I get 1.8v on the cap at the top of the emmc when I press the power button but no backlight...
  10. bombob

    Hacking Nintendo switch bricked ( Only turn on with Hekate with the micro sd Out)

    I wasnt able to see the screenshots you posted. And now that I do,I cant see where it say emmc error. It should say "cant initialize emmc" for it to be a emmc error. Your sdcard or the files on it are probably faulty. Try loading an older version of Hekate Sent from my SM-N960U using Tapatalk
  11. bombob

    Hacking Nintendo switch bricked ( Only turn on with Hekate with the micro sd Out)

    The soldering points are on the wiki Sent from my SM-N960U using Tapatalk
  12. bombob

    Hacking Nintendo switch bricked ( Only turn on with Hekate with the micro sd Out)

    It looks like your emmc module is not connected or dead.if you have another hackable switch,try your emmc to see if it wont read it either.If so,you will have to find a way to read the emmc content directly(soldering) Sent from my SM-N960U using Tapatalk
  13. bombob

    Hardware 1A Wireless Charging for the NS

    Yes as it would block the cooling system.But to me this is a non issue. This mod should be pinned or featured IMO Sent from my SM-N960U using Tapatalk
  14. bombob

    Hardware 1A Wireless Charging for the NS

    OMFG this is awesome. I really like to see hardmods on the nswitch. And this one is very useful. Does it connect to the battery or does it use the connections to m92t chip so the system knows its charging? Sent from my SM-N960U using Tapatalk
  15. bombob

    Hardware Dock mode only

    You were the first person to tell me that the switch is supposed to work without the p13usb and now you are adding another great knowledge on that chip [emoji119] Sent from my SM-N960U using Tapatalk
  16. bombob

    Hardware Dock mode only

    Check screen connetlctor for crossed or displaced pins Sent from my SM-N960U using Tapatalk
  17. bombob

    Hardware Any ideas on this missing ribbon cable pad?

    Look with a magnifier or a microscope.There should be a tiny point(connection) right in the middle.If not ,its probably NC Sent from my SM-N960U using Tapatalk
  18. bombob

    Hardware Swapping parts from V2 into V1

    Why do you want to do this? Sent from my SM-N960U using Tapatalk
  19. bombob

    Hardware Corrupt Prod.info?

    Mostly your sd card formatting. Or sd card corruption Sent from my SM-N960U using Tapatalk
  20. bombob

    Hardware No boot, slow charge and shuts down after Nintendo Logo

    Check your serial# to make sure its not patched.disconnect emmc (will boot straight to rcm)and remove sdcard Then try sending hekate Sent from my SM-N960U using Tapatalk
General chit-chat
Help Users
    BakerMan @ BakerMan: @Xdqwerty (Un-/j's your message)