Separate names with a comma.
surely related but i finally figured it out. So i reassembled it after i posted this and it worked for some reason, going to cfw easily. After...
yes, i even tried reflowing as i said, completely unplugging the battery Ill try this, just found the firmware and flash tool on SX's site.
Cant figure out what went wrong. SX Lite has been running for a month fine now, I reboot and now it boots straight to horizon ofw without any TX...
Have you removed the shell at all? Make sure the sd reader is seated well. Also make sure your SD card is not formatted as ntfs.
Yes, easily update offline: https://switchtools.sshnuke.net/ ChoiDujourNX
They have been out since july
Make sure the name isnt too long. I.e. rename it to something like "game1 update.nsp:
if you dont know if you are on the same network, honestly you should not be trying to FTP stuff... either way, same network is exactly what it...
It does direct air flow, it may cool the CPU a tad, but that is what the copper heatsink is for.
https://www.amazon.com/gp/product/B06Y2N568J/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 all you'll ever need.
You should have a 3d printed brace for the USB connector. For me, i would not trust pushing it in over and over, something will break, even with...
No. I am going to replace the M92T Usb controller IC in a few days, i think i fried that chip. Ill post here if it works after the replacement....
you have a pic?
You are using too much solder. Literally all that will stick to the end of the lead is enough. More and it will stick to other things.
Heres some pics of the other 3V route i used, it is easier(at least for me) than trying not to bridge the connections between the 2 caps. pic 1...
Axiogame has them cheap, usually only hours for a code. I've ordered 3 no problems at all.
if anyone is having trouble with the small 3v leads, what i did was scrape with an x-acto the following trace(yellow)to bare it and solder to...
im also looking if anyone knows this caps value.
any way to tell if i killed the m92t36? I might have bridged the red/yellow and not realized it. Switch wont boot, has a kind of buzzing sound...
Ill have to grab my multimeter, but i am pretty sure i did not.
