Separate names with a comma.
They are 0201
I had one a couple of days ago that wouldn’t see an SD card, the pins on the motherboard connector were ever so slightly pushed inwards. I used a...
After reading this post, it appears as thought the original switch uses a TPS61163A, I don’t know if the lite uses the same though....
Does anyone know what the number of the chip is or where to get them? cheers
Sorted it. All the missing resistors to the right are 100k, the one at the top is a 220k
Hmmm, it appears as though I am missing a fair few resistors and a couple of capacitors, does anyone know the values?
Just remove it, some models don’t even have it fitted.
I’ve got a lite that isn’t charging, someone else had looked at it before me so I’m not sure if there are and components missing. I’ve replaced...
Had this one in today, looks like some models don’t have either fitted.
I didn’t replace it as I didn’t have a spare one
The rails will be worn and need replacing
It’s an Official one
Ive got a Pro controller that’s not turning on, connects to a PC via usb but no response from buttons etc, if I press the sync button, it...
Check the 7C/DUG protection diode on the underside of the motherboard. I had one doing this and the diode had failed. If you look back through my...
I had one doing this, it was the battery that was faulty
I keep on coming across Docks that have no HDMI output, I normally just replace the PCB. Is there a common issue (T17 chip?)
yes, I checked it against another console. On the faulty console one of the CC lines read 14k to gnd.
It’s on the underside of the motherboard near to the USB port
Sorted it. On one CC line it measured open circuit to gnd, on the other it measured 14k. The little dug/7c ESD protection diode was the problem
Hi I have a Switch with a strange charging issue. With the charger plugged in one way it charges fine, if I rotate the charger, it shows as not...
