Separate names with a comma.
Actually there is softmod option on old 360's with certain dvd drives, you could flash drive fw without any hardware mods.
I just updated with choidojournx. I did not disable autorcm before that and it was enabled after update.
@Freezerbomb I have exactly the same setup.
Just do the update, joycon updates do not require internet connection.
We don't have to.
I had to use very thin double sided tape in order it to fit without leaving a bump on the back cover.
You have to unlink your nands. Do a factory reset on either sysnand or emunand.
I also had trouble soldering ground, I tried several ground points but non would stick, it took like 10 tries until I finally got it to stick.
You could use HDD with external power supply or powered USB hub.
Also SSD drivers should work without Y-cable.
30€ for 200/50
You can use "that iso site"
XAJ70043X not safe to buy, probably patched
Faulty sd card reader may prevent switch from booting, try taking card reader module out and it should boot.
Shorted 9&10 pins shouldn't drain battery. Did it happen only once? It is possible that game you were playing didn't allow switch to sleep, there...
What FW are you on?
Are you using SX OS nsp installer? Try using tinfoil or devmenu.
Also you might wanna check your sdcard with H2testw.
Which pins are bent? Are they touching?
Just update to 5.1 and have Trinket m0 internally installed, with this you can coldboot to CFW, no more jigs and manually pushing payloads. Imo...
Plug it to a PC and use TegraRCMsmash to check if console is in RCM mode.
Thank you for your help.
Thank you for explanation.
So I should install trinket 3v wire to missing cap pad? My trinket is currently soldiered to the another cap, the one...
Do you know what is the purpose of the cap you solder to in new method?
The reason I ask is that after installing trinket, my...