Separate names with a comma.
The guy who made a tutorial on upgrading emmc recommended 390c-400c, but it looks like my hot air station is more powerful/more accurate than his....
I've removed the memory chip from the pcb and I'm going to try to read it by other means.
I'm still waiting for the reader and bga stencil to...
The component that used to reside where the purple circle is.
Thanks for your help!
Hi mattytrog, could i ask for your advice on a 'failed to init emmc' Switch? (I don't think i can pm you)
Sucks to be me then.
.... Maybe I should try replacing the resistor that I knocked off the pcb rather than replace the whole board.
I'm looking for a little advice.
I have acquired two Switches both with the "failed to init emmc" error and nothing shows up when I try...
Basically, I have had to remove the nand from the board and I damaged the board during the removal process. I think buying a new board with the...
Are you telling me all the ppl selling homemade 256gb and 128gb modules on these forums buy the entire module with the 32gb NAND?
Yes that board without the nand chip
The NAND requires soldering
Hi Onlyd, do you have any idea where i could purchase the memory module board from without the nand chip?
I'm also looking for the little board the nand sits on.
I'm talking about the little pcb the nand sits on
Hi All, question is in the subject line.
If anyone could point me to a seller than that would be much appreciated.
Hi Pintglass, the cap appears to be shorted to ground.
Have you come across this fault before?
Although I'm not sure if this short has anything...
And the bucks are controlled by the max77620?
What voltage are they supposed to output?
Hi mettytrog, thanks for chiming in.
So on broken switch #1, I have a suspicion it's the M92T36.
- As per one of yours posts, I measured the...
I was referring to the cap you marked with the red arrow.
I'll test the cap when I get home on the weekend.
You are a star
The weird thing is, I have another broken switch and I get nearly identical readings. I reckon the chances of...
I have a dead Switch and after going hunting for shorted components, I found a couple with relatively low resistance to ground (lowest...