Hacking 3DS NOOB PARADISE - Ask questions here

nicko_dev · Aug 11, 2022

I've been looking at the instructions for ntrboot, and I have a question: what would happen if the Luma3DS boot.firm file was used before installing boot9strap with the SafeBS9Installer.firm file? They seem like they're the same "type" of file... hopefully nothing bad would happen if someone mixed them up?

CoolMe · Aug 11, 2022

nicko_dev said:
I've been looking at the instructions for ntrboot, and I have a question: what would happen if the Luma3DS boot.firm file was used before installing boot9strap with the SafeBS9Installer.firm file? They seem like they're the same "type" of file... hopefully nothing bad would happen if someone mixed them up?

You should follow the ntrboot cfw guide and do exactly as it tells you.. why are you asking? Because if you've already finished the cfw installation then their no worry if you swapped both files accidentally, the console wouldn't boot to the home menu without the Luma3DS's boot.firm file on the root of the sdcard.

WingFeather77 · Aug 11, 2022

Hey guys! How do I mod Smash 3DS? All I really want to do is add a single skin to the game (Mr. L), and that's it. But I haven't found any sort of guide that's been helpful. Any help is appreciated! Thanks!

KleinesSinchen · Aug 11, 2022

nicko_dev said:
I've been looking at the instructions for ntrboot, and I have a question: what would happen if the Luma3DS boot.firm file was used before installing boot9strap with the SafeBS9Installer.firm file? They seem like they're the same "type" of file... hopefully nothing bad would happen if someone mixed them up?

Ntrboot can be considered to be "one-time B9S" (full access to everything from boot time on).
B9S tries loading boot.firm from SD first. If you provide any valid FIRM file on the SD, B9S will start it -- same for ntrboot. The normal thing to to with ntrboot is starting SafeB9SInstaller so you can permanently install B9S. Any other firm file can be used as well (Well, I didn't try ever last thing that exists). If you mix Luma and the installer up nothing bad will happen.

Ntrbooting other files can even be helpful:

Using Luma3DS as boot file for ntrboot can in fact be useful for gaining access to homebrew software without permanent modification. A good example is Checkpoint to extract important saves from a stock 3DS.
Using GodMode9 as boot file enables backing up the NAND before any modification (answering "no" to the question about the essentials backup on this one occasion). Interesting for purists who want to be able to go back to a virgin state -- which I wouldn't recommend as it is forced NAND restore.

CoolMe · Aug 11, 2022

WingFeather77 said:
Hey guys! How do I mod Smash 3DS? All I really want to do is add a single skin to the game (Mr. L), and that's it. But I haven't found any sort of guide that's been helpful. Any help is appreciated! Thanks!

Well that depends, is this skin was pre-made by someone or did you make it yourself? If it's like any game hacks & mods you have to enable "game patching" in Luma3DS Menu (you access it by holding select on boot), and putting the mod files inside the Luma folder that's on the root of the sdcard..

WingFeather77 · Aug 11, 2022

CoolMe said:
Well that depends, is this skin was pre-made by someone or did you make it yourself? If it's like any game hacks & mods you have to enable "game patching" in Luma3DS Menu (you access it by holding select on boot), and putting the mod files inside the Luma folder that's on the root of the sdcard.

The skin was pre-made. Do I just have to drop the files into the Luma folder? That seems too easy. XD

CoolMe · Aug 11, 2022

WingFeather77 said:
The skin was pre-made. Do I just have to drop the files into the Luma folder? That seems too easy. XD

I can't tell you if that's the case. Where did you get the file? Often modders will give you instructions on how to make it work..

WingFeather77 · Aug 11, 2022

CoolMe said:
I can't tell you if that's the case. Where did you get the file? Often modders will give you instructions on how to make it work..

Alright. I'll make a separate thread then. I got it from GameBanana. Thanks!

epistaxis · Aug 11, 2022

Hows retroarch performance on a new 3DS these days?

Hello1234_1234 · Aug 11, 2022

Cyan said:
ah yes, I forgot about the Guide section.

I'll add some of them, but users could just check the Faqs and Guide sections too.

I have a problem when I try to boot to the home screen it says arm 11 data abort core 0 translation - page and when I use luma 9.1 the screen is just black with the power light staying on

CoolMe · Aug 11, 2022

Hello1234_1234 said:
I have a problem when I try to boot to the home screen it says arm 11 data abort core 0 translation - page and when I use luma 9.1 the screen is just black with the power light staying on

What firmware is your 3ds on? Regardless you should update Luma3DS to the latest version, just put the Boot.firm on the root of the sdcard overwriting the older one.
If you're not sure about what firmware you have, boot into the recovery mode and update your system, or remove the sd card and update it through the system settings as you normally would..

Hello1234_1234 · Aug 11, 2022

CoolMe said:
What firmware is your 3ds on? Regardless you should update luma 3ds to the latest version, just put the Boot.firm on the root of the sdcard overwriting the older one.
If you're not sure about what firmware you have, boot into the recovery mode and update your system, or remove the sd card and update it through the system settings as you normally would..

I read your reply and I am on the latest version of luma now it says Arm 11 core 1 data abort permission - section sm 000000000... more 0's Also godmode9 and luma settings still boot

CoolMe · Aug 11, 2022

Hello1234_1234 said:
I read your reply and I am on the latest version of luma now it says Arm 11 core 1 data abort permission - section sm 000000000... more 0's Also godmode9 and luma settings still boot

Does it boot to the home menu when the sd card is not inserted? If so, you might want to check the sd card for errors with h2testw. Backup the sd card's content before doing so.
Test it with the read & write setting.
Format it as FAT32 32kb clusters before and after the test. Then post the result here, we'll see if it's culprit or something else..

Hello1234_1234 · Aug 12, 2022

CoolMe said:
Does it boot to the home menu when the sd card is not inserted? If so, you might want to check the sd card for errors with h2testw. Backup the sd card's content before doing so.
Test it with the read & write setting.
Format it as FAT32 32kb clusters before and after the test. Then post the result here, we'll see if it's culprit or something else..

it boots to the home screen with no sd but I already formatted it to fat 32 I will try to test to it and reformat it Any advice?

CoolMe · Aug 12, 2022

Hello1234_1234 said:
it boots to the home screen with no sd but I already formatted it to fat 32 I will try to test to it and reformat it Any advice?

No. Just do exactly as i said in my previous reply.

Hello1234_1234 · Aug 12, 2022

CoolMe said:
No. Just do exactly as i said in my previous reply.

Update: I tested the card and it was fine so then I formatted it 3 times in a row and I put it back in and now it boots to the home screen but then when I tried to open homebrew it gave me the error Arm 11 core 1 data abort translation - section boss and a bunch of numbers so now its stuck at the home screen unable to launch anything without crashing

CoolMe · Aug 12, 2022

Hello1234_1234 said:
Update: I tested the card and it was fine so then I formatted it 3 times in a row and I put it back in and now it boots to the home screen but then when I tried to open homebrew it gave me the error Arm 11 core 1 data abort translation - section boss and a bunch of numbers so now its stuck at the home screen unable to launch anything without crashing

You can launch Rosalina and reinstall all the homebrew apps (cias), fbi, homebrew launcher, etc. Use new files (redownload them).
Also if you don't have any installed games or saves, i would delete or move the Nintendo 3ds folder that's on the root of the sdcard to some safe place, and inserting the sd card to the system so it would create a new clean one. That would rule out file corruption on the Nintendo 3ds folder.

Hello1234_1234 · Aug 13, 2022

CoolMe said:
You can launch Rosalina and reinstall all the homebrew apps (cias), fbi, homebrew launcher, etc. Use new files (redownload them).
Also if you don't have any installed games or saves, i would delete or move the Nintendo 3ds folder that's on the root of the sdcard to some safe place, and inserting the sd card to the system so it would create a new clean one. That would rule out file corruption on the Nintendo 3ds folder.

ok I will try

Hello1234_1234 · Aug 13, 2022

Hello1234_1234 said:
ok I will try

now it just crashes when I open an app with the arm 11 error

CoolMe · Aug 13, 2022

Hello1234_1234 said:
now it just crashes when I open an app with the arm 11 error

I would suggest formatting the system and updating the firmware (even if it is on the fw). Did you delete the Nintendo 3DS folder on your sd card?

Hacking 3DS NOOB PARADISE - Ask questions here

Member

That's the way she goes..

Member

GBAtemp's Backup Reminder + Fearless Testing Sina

That's the way she goes..

Member

That's the way she goes..

Member

Well-Known Member

Member

That's the way she goes..

Member

That's the way she goes..

Member

That's the way she goes..

Member

That's the way she goes..

Member

Member

That's the way she goes..

Similar threads

Popular threads in this forum