Hacking SWITCH NOOB PARADISE - Ask questions here

binkinator

binkinator

Garfield’s Fitness Coach
Member
GBAtemp Patron
Level 16
Joined
Mar 29, 2021
Messages
6,511
Trophies
2
XP
6,155
Country
United States
Draxzelex said:
If you're only seeing the crash with homebrew apps, then its possible you aren't launching them with enough RAM. If you're using the Album to open the homebrew menu, you probably will also see the Applet Mode message indicating that you are launching the homebrew menu as an Applet which limits the amount of RAM for homebrew apps. For full RAM usage, you will need to launch the homebrew menu via title override which you do by holding R over any game/title then launching it.

That error code seems to be associated with the SD card and not the games since it triggers for people without modded consoles. I'm not sure if you ran a legitimacy check but check to see if its a fake SD card or not with a tool such as FakeFlashTest. Its also possible that the SD card is dying.

You're looking at the "missing features" the wrong way. From TX's point of view, they only want to use whatever applications comes bundled with SX OS which severely limits your options (notice how they made SX branded versions of installers and save managers?). Atmosphere doesn't come bundled with any homebrew applications because the expectation is for the user to download those themselves because the homebrew community has developed hundreds of apps. They cannot assume what homebrew apps the user will need or find useful so none are pre-packaged with the CFW (except for 2). However, there are people who offer Atmosphere packages with some homebrew apps pre-bundled. One of them is called DeepSea. Note, they are still offering the same CFW which is Atmosphere; it just comes with some homebrew apps that you may or may not find useful.

The HDD support is a misnomer. Atmosphere fully supports HDDs, potentially more than SX OS. It just doesn't launch .XCI files like SX OS does. However you can install .NSP files from HDDs or even move files from them. And the reason Atmosphere doesn't support launching .XCI files is because of the associations with piracy. But installing .NSP files was deemed fine because there are non-piracy uses such as homebrew apps.

There is no such thing as a "sig patch". What actually exists are ES, FS, & Loader patches. ES patches are short for Eticket Signature patches and these allow .NSP files to be installed then launched. FS patches stand for File System patches and these enable installing .XCI files and homebrew .NSP files. Basically these patches allow .NSP files that aren't signed by Nintendo to be launched. Loader patches are a subtype of FS patches because Nintendo moved the signature checks in their OS from FS to Loader so these patches needed to be developed.
Click to expand...
I clicked send one minute before you did. I should have redirected here. Ungh.
 
binkinator

binkinator

Garfield’s Fitness Coach
Member
GBAtemp Patron
Level 16
Joined
Mar 29, 2021
Messages
6,511
Trophies
2
XP
6,155
Country
United States
Purple_Rodri said:
How do I exactly do that ?
Click to expand...

https://gbatemp.net/blogs/homebrew-i-use.18815/

There’s a section on Tesla.

Great tool for all sorts of things but one of the overlays you can deploy is

There also a write up for you to understand more details about what’s going on.

Once you know the mechanics, there’s an easier way to install the stack through HomeBrew App Store:

https://github.com/fortheusers/hb-appstore

Just go to the latest release and download appstore.nro and place it in your /switch directory.

Then enter HB Menu and open the App Store and then Search the App Store for ‘Tesla‘ and install all the apps it shows (should be two of them.)

Install the Status-Monitor-Overlay from above and then you should be able to watch all your stats while you play and see if there is a temp spike or the fans stop or anything else weird.
 
KungFuzion

KungFuzion

Well-Known Member
Member
Level 7
Joined
Feb 5, 2015
Messages
362
Trophies
0
Age
39
XP
1,130
Country
Need a bit of help pls. I was initially on sxos with the sxos dongle for injecting the payload. I migrated to atmosphere when all the drama unfolded with sxos but still used my sxos dongle using the custom file to boot up atmosphere. The sxos dongle is shit & doesn't always work even after giving a quick charge. So I bought a rcm loader but I'm not sure what I need to do to start using that instead. I'm currently on 14.1.1 on emunand. Thanks
 
Hayato213

Hayato213

Newcomer
Member
Level 28
Joined
Dec 26, 2015
Messages
19,920
Trophies
1
XP
20,889
Country
United States
KungFuzion said:
Need a bit of help pls. I was initially on sxos with the sxos dongle for injecting the payload. I migrated to atmosphere when all the drama unfolded with sxos but still used my sxos dongle using the custom file to boot up atmosphere. The sxos dongle is shit & doesn't always work even after giving a quick charge. So I bought a rcm loader but I'm not sure what I need to do to start using that instead. I'm currently on 14.1.1 on emunand. Thanks
Click to expand...

You can either put fusee.bin or hekate.bin on the RCM loader, depend on if you want to boot directly into Atmosphere, or use Hekate as your bootloader, some people like to use Hekate as it has multiple purpose tool like NAND backup, to create emunand etc.
 
KungFuzion

KungFuzion

Well-Known Member
Member
Level 7
Joined
Feb 5, 2015
Messages
362
Trophies
0
Age
39
XP
1,130
Country
Hayato213 said:
You can either put fusee.bin or hekate.bin on the RCM loader, depend on if you want to boot directly into Atmosphere, or use Hekate as your bootloader, some people like to use Hekate as it has multiple purpose tool like NAND backup, to create emunand etc.
Click to expand...
I usually just use the hekate bootloader, as you mentioned I like having all the other options. Is there anything I need to do on the sdcard?
 
Hayato213

Hayato213

Newcomer
Member
Level 28
Joined
Dec 26, 2015
Messages
19,920
Trophies
1
XP
20,889
Country
United States
KungFuzion said:
I usually just use the hekate bootloader, as you mentioned I like having all the other options. Is there anything I need to do on the sdcard?
Click to expand...

The files on the SD card needs to be correct and up to date, because the file on the rcm loader just a payload, just like you put a payload on the computer, if you are missing the rest of atmosphere file even if you push fusee.bin it won't boot.
 
KungFuzion

KungFuzion

Well-Known Member
Member
Level 7
Joined
Feb 5, 2015
Messages
362
Trophies
0
Age
39
XP
1,130
Country
No luck, I put the latest hekate in the atmosphere folder on the rcm loader & when I went to load the payload I just get a black screen
 
Draxzelex

Draxzelex

Well-Known Member
Member
Level 23
Joined
Aug 6, 2017
Messages
19,011
Trophies
2
Age
29
Location
New York City
XP
13,378
Country
United States
KungFuzion said:
Need a bit of help pls. I was initially on sxos with the sxos dongle for injecting the payload. I migrated to atmosphere when all the drama unfolded with sxos but still used my sxos dongle using the custom file to boot up atmosphere. The sxos dongle is shit & doesn't always work even after giving a quick charge. So I bought a rcm loader but I'm not sure what I need to do to start using that instead. I'm currently on 14.1.1 on emunand. Thanks
Click to expand...
Which RCM Loader do you have? Follow the instructions on their website depending on which one you have.
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew Tutorial  Building Pagascape from source to running Self Hosted mode on Windows and MSYS

mig switch not working/updating??

Hacking Misc  Getting the MIG Switch to load an XCI dump without its original Initial Data

Hacking Homebrew Tutorial  Portable PegaScape (Win32)

Fusee.bin with the new Pre-release of Atmoshere 1.7.0

DBI language error

Emulation Homebrew Tutorial  Building SM64 for Nintendo Switch from sm64ex-alo Repository

Homebrew Tutorial  Setup a DevKitPro environment on Windows.

General chit-chat
Help Users
    K3Nv2 @ K3Nv2: https://youtube.com/shorts/WOppJ92RgGU?si=KE79L6A_3jESsGQM