Tried reloading a payload>Black Screen Can't turn it on or enter RCM mode

Bluelaking · May 26, 2022

Soooo I fucked up real bad

My switch turned off and I tried injecting a payload injected the wrong payload then I injected ReiNX and battery appeared then black screen

The loader says

Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
RCM device disconnected

Now it doesn't turn on like nothing turns on
Is it a paperweight now?

Hayato213 · May 26, 2022

Bluelaking said:
Soooo I fucked up real bad

My switch turned off and I tried injecting a payload injected the wrong payload then I injected ReiNX and battery appeared then black screen

The loader says

Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
RCM device disconnected

Now it doesn't turn on like nothing turns on
Is it a paperweight now?

It accepted the payload, sound like your problem isn't the injecting part, probably your NAND if you inject Atmosphere and get a black screen.

Bluelaking · May 26, 2022

Hayato213 said:
It accepted the payload, sound like your problem isn't the injecting part, probably your NAND if you inject Atmosphere and get a black screen.

I know this will sound real stupid but what do I do now?
I do have a backup

Hayato213 · May 26, 2022

Bluelaking said:
I know this will sound real stupid but what do I do now?
I do have a backup

Try Injecting Atmosphere, as ReiNX doesn't work on higher firmware.

pinbi7 · May 26, 2022

i would try putting it in RCM again and load hekate and then load fusé from there

Bluelaking · May 26, 2022

Hayato213 said:
Try Injecting Atmosphere, as ReiNX doesn't work on higher firmware.

Yeah that is the difficult part the scary part it doesn't detect rcm mode it's black on the switch and Tegra says it isn't connected no rcm device conected

Bluelaking · May 26, 2022

pinbi7 said:
i would try putting it in RCM again and load hekate and then load fusé from there

I press +vol and power and it doesn't show in tegra

pinbi7 · May 26, 2022

power down completely hold power for 20 sec and try again might need the "paper clip" again if you don't have auto rcm
the black screen is because the switch is still on

Bluelaking · May 26, 2022

pinbi7 said:
power down completely hold power for 20 sec and try again might need the "paper clip" again if you don't have auto rcm
the black screen is because the switch is still on

Oooooooooh! man it does turn on now!

Bluelaking · May 26, 2022

pinbi7 said:
power down completely hold power for 20 sec and try again might need the "paper clip" again if you don't have auto rcm
the black screen is because the switch is still on

I'll try loading hekate

impeeza · May 26, 2022

first at all "Get Calm down"

Take a NEW SD card what you can format. format it at FAT32 using http://ridgecrop.co.uk/index.htm?guiformat.htm
OR http://ridgecrop.co.uk/guiformat-x64.Exe

Then download the latest version of Hekate from https://github.com/CTCaer/hekate and put on the root of sd card.

Download the latest version of Atmosphère from https://github.com/Atmosphere-NX/Atmosphere and put on root of sd too.

Put that sd card on the Switch, while you inject the "hekate_ctcaer_5.7.2.bin" file KEEP pressed VOL - you should get in NYX.

let us to know how that works for you.

Bluelaking · May 26, 2022

impeeza said:
first at all "Get Calm down"

Take a NEW SD card what you can format. format it at FAT32 using http://ridgecrop.co.uk/index.htm?guiformat.htm
OR http://ridgecrop.co.uk/guiformat-x64.Exe

Then download the latest version of Hekate from https://github.com/CTCaer/hekate and put on the root of sd card.

Download the latest version of Atmosphère from https://github.com/Atmosphere-NX/Atmosphere and put on root of sd too.

Put that sd card on the Switch, while you inject the "hekate_ctcaer_5.7.2.bin" file KEEP pressed VOL - you should get in NYX.

let us to know how that works for you.

Im searching for a new one might have to go buy one

impeeza · May 26, 2022

It's just for test, but after my post I read you manage to boot again?

Bluelaking · May 26, 2022

impeeza said:
It's just for test, but after my post I read you manage to boot again?

Yeah it worked and it does appear on tegra now

impeeza · May 26, 2022

perfect, so now what is you goal? update?

Bluelaking · May 26, 2022

Bluelaking said:
Yeah it worked and it does appear on tegra now

It goes black again after injecting hekate

impeeza · May 26, 2022

ok, try the test proposes, a new car with hekate and atmosphere only, and try to get in NYX

Bluelaking · May 26, 2022

Bluelaking said:
Soooo I fucked up real bad

My switch turned off and I tried injecting a payload injected the wrong payload then I injected ReiNX and battery appeared then black screen

The loader says

Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected
RCM device disconnected

Now it doesn't turn on like nothing turns on
Is it a paperweight now?

I don't really know how to tag everyone but thanks a lot I was really scared and you helped me out I love all of you Thanks!
You are awesome!

Tried reloading a payload>Black Screen Can't turn it on or enter RCM mode

Member

Attachments

Newcomer

Member

Newcomer

Well-Known Member

Member

Member

Well-Known Member

Member

Member

¡Kabito!

Member

¡Kabito!

Member

Attachments

¡Kabito!

Member

¡Kabito!

Member

Attachments

Similar threads

Popular threads in this forum