Okay. Well, I've only been using emunand & Gatewaynand. My games & apps don't show up right in sysnand...so I don't use it. I don't care as much about the eShop...just wanted to go online in emunand.
Hacking gateway GW3D 11.10 (B9S AND CFW)
- Thread starter Deleted member 668561
- Start date
- Views 56,998
- Replies 209
- Likes 9
Mine is 11.14, Haven't updated it to lastest but it still will work anyway
--------------------- MERGED ---------------------------
If you update the emunand, just run sysupdater on the emunand using luma, you should already know how to install cia's and boot/install homebrew, otherwise booting gateway will just black screen
--------------------- MERGED ---------------------------
If you update the emunand, just run sysupdater on the emunand using luma, you should already know how to install cia's and boot/install homebrew, otherwise booting gateway will just black screen
Last edited by Deleted member 668561,
My emunand is now bugging me to update to 11.15.0-47U every time I start up. What's the best way to go about this so I don't lose my Gateway? Do I let it update when it prompts or cancel and manually go into Settings? I just don't want to mess anything up.
I appreciate what you are saying...but I prefer to keep my ability to run Gateway. (For instance: I have game cheats that only run on Gateway,)
ClancyDaEnlightened (name changed) started this thread to show how to keep Gateway while enjoying newer system firmware. I was able to update to 11.14, but forgot exactly how I did it and was hoping he could weigh in.
11.15 maybe (presumably) be the last update and I know it shouldn't break functionality. If Nintendo was still pushing out regular updates then I wouldn't worry about it.
Just update via system settings.
1. EmuNAND is a much safer approach to homebrew than messing with your system NAND. If something happened to your EmuNAND, the worst that happens is you have to either set it up all over again using the virgin SysNAND you have, or if you were smart and made a NAND backup of your EmuNAND, restoring that. It's much easier to replace SD cards than it is fixing a NAND chip when it's near dead from all the flashing and such.
2. I appreciate the fact you just asked instead of being hugely persistent and hell bent on this person to install custom firmware another way. The thing is I don't think people in this thread need a reminder of what's out there, they are well aware, but they wanted to use something different to achieve essentially the same goal as the modern setups. The way I see it, nobody really has a right to say anything on the matter given they didn't pay for the systems being used for this, it's the responsibility of the respective individuals whether people like it or not.
Message to anyone reading this:
If you can offer help to what these people use, then help, if you don't know anything on the matter, it's just best to leave the topic alone, and worry about your own stuff.
Oh! If Gateway works with the latest firmware then he should at least try it, with an emunand backup as last resort.
My response was based on the notion that he wasn't sure if it'll work/compatible or not, he seemed hesitant and i thought i'd present an easy alternative. It wasn't my intention to come off as preachy or anything like that, and i couldn't care less about what's someone's preferred way of running homebrew on their 3DS.
Hm... I don't get the tutorial very well (a little messy).
I have this:
-B9S and Luma (don't want fastboot3ds).
-Emunand GW3D 10.7.0-32E.
-old3DS_GW_v11.14.0-46E (downloaded from psxtools web mentioned here on last pages). Includes "updates" and "updates (update!)". I can't dowload the last "11.15.0-47" with 3dsnus (winxp problem maybe).
The tutorial say "if your emunand is 11.2 or below you don't need to downgrade ", so i must avoid the folder "updates" (contain 7 files) and do what? Since this tutorial start with v11.10, maybe his "downgrade" statement is only for that and not for the sysupdater files after update his 3ds, when you need to downgrade with that 7 files?
So, i'm on 10.7.0-32E and only need to "downgrade" with the 7 files from the "update" folder (booting on emunand with CFW to perform the downgrade) and then update normaly (with cfw or gateway?)? Can i use the update from "updates (update!)" if i want to avoid updating online?
Since author from sysupdater state to avoid running the app from a spoofer like gateway, i suppose i must use CFW to perform the task: "IMPORTANT: Don't run this with any sort of firmware spoofing enabled like Gateway mode/rx mode/whatever or it will brick!". And his author mention something about don't support higher firmware than 9.2.0 (don't get it: it's about downgrading until 9.2.0 or updating?).
I have this:
-B9S and Luma (don't want fastboot3ds).
-Emunand GW3D 10.7.0-32E.
-old3DS_GW_v11.14.0-46E (downloaded from psxtools web mentioned here on last pages). Includes "updates" and "updates (update!)". I can't dowload the last "11.15.0-47" with 3dsnus (winxp problem maybe).
The tutorial say "if your emunand is 11.2 or below you don't need to downgrade ", so i must avoid the folder "updates" (contain 7 files) and do what? Since this tutorial start with v11.10, maybe his "downgrade" statement is only for that and not for the sysupdater files after update his 3ds, when you need to downgrade with that 7 files?
So, i'm on 10.7.0-32E and only need to "downgrade" with the 7 files from the "update" folder (booting on emunand with CFW to perform the downgrade) and then update normaly (with cfw or gateway?)? Can i use the update from "updates (update!)" if i want to avoid updating online?
Since author from sysupdater state to avoid running the app from a spoofer like gateway, i suppose i must use CFW to perform the task: "IMPORTANT: Don't run this with any sort of firmware spoofing enabled like Gateway mode/rx mode/whatever or it will brick!". And his author mention something about don't support higher firmware than 9.2.0 (don't get it: it's about downgrading until 9.2.0 or updating?).
Last edited by rocknard,
No worries, I didn't think you were being preachy, I was more so speaking more generally than specifically, sometimes I just make the mistake of not emphasizing that more accordingly, most people who know really are preachy and it kind of sucks. Anyways all he needs to do if he's worried is make a backup of his EmuNAND, if it didn't work the worst that happens is EmuNAND would never load, thus a NAND restore can fix it back. However given I run EmuNAND on one of my systems as well, I know it works because I have tried it.
I think I confused myself somewhere down the line. I misspoke:
I followed the directions the best I could and updated my SysNand to 11.14 back when it released. My EmuNand was on 11.2 and Gateway worked beautifully. Yesterday I let the EmuNand update to 11.15, then I ran the sysUpdate.cia file and selected 'Downgrade'. Now Gateway only launches the splash screen before going blank. Not sure what I'm doing wrong.
Edit: Never mind. I figured it out.
Last edited by djnate27,
- Joined
- Jul 23, 2018
- Messages
- 6,048
- Trophies
- 1
- Age
- 29
- Location
- Lampukistan
- Website
- hmpg.net
- XP
- 6,156
- Country
If you aren't here to be helpful then stay out of the thread. Let people modify their systems the way they want.
Yes, you can, I updated mine here last year, when the update launched
You can just update the emunand on the system settings, no need to run SysUpdater again
Similar threads
-
@
Psionic Roshambo:
My phone is pretty secure the Chinese spies tell me it's really locked down and I probably should eat more fiber lol+2 -
-
-
-
-
-
-
-
@
BakerMan:
@SylverReZ I didn't say I watched either, did I?
I didn't actively watch them, rather, I had the misfortune of witnessing that shit -
-
tempBOT:
LeoTCK has joined the room. -
-
-
-
-
-
@
SylverReZ:
@K3Nv2, Ah shit, here we go again. I ain't represented Grove Street in five years, but the Ballas won't give a shit.
-
-
-
-
-
-
-
-
Always touching 
] brb
