Atmosphere version 1.1.0 enters pre-release, adds support for Switch firmware 13.0.0

banner.png

It's the second June 15th for the month of September, as the Atmosphere custom firmware for Switch has released another big update. After the landmark release of Atmosphere 1.0.0 on September 7th, Nintendo released a new major update for the Switch, firmware version 13.0.0, only a week later. Not only was this version incompatible with the newest release of Atmosphere, as expected, but landmark updates like that tend to take longer to make comply with Atmosphere. However, only five days after that update, SciresM has already pre-released the next version of Atmosphere, 1.1.0, that is compatible with Switch firmware 13.0.0. As of right now, Atmosphere 1.1.0 is in pre-release form, meaning that while everything should work correctly, the team is awaiting any bug reports.

While you're updating custom firmware on your Switch, you may also want to update your Hekate bootloader, which released its newest version only minutes after the newest Atmosphere update.

If you're interested in downloading these new releases, you can grab it from their respective GitHubs, linked below.

:download: Atmosphere Download Page
:arrow: Atmosphere Discussion Thread
:download: Hekate Download Page

1.1.0 is Atmosphère's fifty-fifth official release.

Please be sure to update fusee when upgrading to 1.1.0. fusee-primary no longer exists, and will not work any more.

Please note: Atmosphère 1.1.0 is currently in pre-release, and issues may be found that need to be fixed before full release.

  • If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
  • 1.1.0 will transition to release after a short amount of time has passed without pressing bug reports.
With thanks to the @switchbrew team, Atmosphère 1.1.0 is bundled with hbl 2.4.1, and hbmenu 3.4.1.

The following was changed since the last release:

  • Support was implemented for 13.0.0.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • ncm was updated to reflect the latest official behaviors.
    • erpt was updated to reflect the latest official behaviors.
      • Two new services ("sprofile") were added to erpt, and have been fully reimplemented.
      • Please Note: These services provide a way for settings to be pushed to consoles over the internet without system update.
        • Because there appear to be no settings pushed out yet, this implementation fundamentally cannot be fully tested right now, but hopefully there are no issues once settings begin being distributed.
  • The LogManager system module was reimplemented.
    • This system module provides services that some games use for logging.
    • Atmosphere's reimplementation supports logging to the SD card (if lm!enable_sd_card_logging is true) and to ams.TMA.
      • To control the directory where logs are saved, modify the lm!sd_card_log_output_directory setting.
    • Atmosphere's reimplementation is disabled by default (in order to save memory), but can be enabled by setting lm!enable_log_manager to true.
      • This will allow reading over logs from games which use the services (or potentially logging from homebrew in the future), which can be useful to developers.
      • Please note that when TMA is fully implemented in the future, enabling TMA will forcibly enable LogManager.
  • General system stability improvements to enhance the user's experience.
For information on the featureset supported by 1.1, please see the official release notes.
 

JonJaded

Well-Known Member
Member
Joined
May 22, 2016
Messages
669
Trophies
0
XP
2,856
Country
United States
I'm trying to update from 0.20.1 to 1.1.0, but idk how to update fusee, for some reason, I've managed to boot atmosphére but my console stucks at the Switch logo (and doesn't even load, logo gets freezed before completely showing up), and sometimes not even that.

I noticed that when my console is conected to my PC and this happens, my PC detects it as a new device conected

No offense, like others said you should wait a bit before jumping onto the 13.0 update. You should delete 010000000000bd00 from your titles and it should boot.
 

CloudMcFox

Member
Newcomer
Joined
Jul 25, 2017
Messages
23
Trophies
0
Age
23
Location
México Mágico
XP
262
Country
Mexico
No offense, like others said you should wait a bit before jumping onto the 13.0 update. You should delete 010000000000bd00 from your titles and it should boot.
Unfortunately I updated accidentally

I was playing Paladins (a game that crashes A LOT), it crashed, and when I tried to enter the game again, I was pushing the A button as fast as possible, and accepted the update. It was dumb, yeah.

And like I said in a comment before I fixed it deleting some folders in "content", most of them were cheats or unused homebrew like SysDVR. Still thank you for your reply!
 
  • Like
Reactions: JonJaded

musmanzafar

Active Member
Newcomer
Joined
Oct 1, 2019
Messages
32
Trophies
0
Age
36
XP
859
Country
Pakistan
Hi, I installed the new pre-release Atmosphere and the new Hekate. I'm pretty newbie at this, and I use Goldleaf to install games. However, newly installed games won't open due to a NCA error (either too low FW or missing sigpatches). Can you help?

Update the sigpatches (hekate ones)
 
  • Like
Reactions: ElYubiYubi

ElYubiYubi

GBATemp Maniac
Member
Joined
Apr 9, 2013
Messages
2,395
Trophies
1
XP
1,792
Country
Puerto Rico
I updated everything on the SD Card, Boot into the StockFw, Updated to 13.0, went back to Hetake, created a new emuMMC and now when I try to boot to any only get a Yellow Screen.
 

Viri

Well-Known Member
Member
Joined
Sep 13, 2009
Messages
4,199
Trophies
2
XP
6,750
Country
United States
  • Please Note: These services provide a way for settings to be pushed to consoles over the internet without system update.
    • Because there appear to be no settings pushed out yet, this implementation fundamentally cannot be fully tested right now, but hopefully there are no issues once settings begin being distributed.
I guess I'll stick to my current firmware, and see how everything goes. lol
 

Dust2dust

Well-Known Member
Member
Joined
Jun 17, 2010
Messages
2,389
Trophies
2
XP
4,290
Country
Canada
Nice job as always, SciresM. I hope to god nothing ever happens that keeps you from working on Atmosphere, or else we would all be in a world of sh*t! Everyone is expendable except you!
 

MasterJ360

Well-Known Member
Member
Joined
Jan 10, 2016
Messages
2,796
Trophies
1
Age
35
XP
3,423
Country
United States
Got the latest Atmo running fine on 13.0.0. installed the FW through Tinfoil. I think the only thing that will cause a minor headache is that Hekate users don't tweak the bootloader config for Package 3 instead of having the old Fusee-secondary. Other than that I haven't encountered any errors or crashes yet.
 
Last edited by MasterJ360,

zebrone

Well-Known Member
Member
Joined
Jul 2, 2007
Messages
1,024
Trophies
1
Location
ITALY
XP
3,285
Country
Italy
Guys ive a problem.
When im selecting boot for atmosphere,in hekate,it doesn't find anything,but it appears this...
Help me...thanks
 

Attachments

  • 20210920_110022.jpg
    20210920_110022.jpg
    395.2 KB · Views: 156

chrono126

New Member
Newbie
Joined
Sep 20, 2021
Messages
1
Trophies
0
Age
37
XP
32
Country
Australia
Hey all, I have updated to the latest firmware but when i first boot i get an package1 not found first then it boots to atmosphere but the games are not downloaded
 
Last edited by chrono126,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • S @ salazarcosplay:
    I have seen the new 52 and dcau animated movies I think they take every opportunity to say his name "Dick", and they say it more often than should have been necessary
  • ShdwTakashi @ ShdwTakashi:
    Good morning!
  • ShdwTakashi @ ShdwTakashi:
    pineapple belong on pizza? The answer is yes until proven otherwise
  • StatusN @ StatusN:
    hi, i need help with unbanning my 3ds, can somebody show me a link to a seed that still works and isnt yet banned, mine got banned yesterday
  • A @ anotherthing:
    The Nintendo servers are going down in 9 days anyway.
  • Xdqwerty @ Xdqwerty:
    Good morning
  • Xdqwerty @ Xdqwerty:
    @StatusN, welcome
  • BakerMan @ BakerMan:
    hey qwerty look at that you ain't the youngest here anymore
    +1
  • S @ salazarcosplay:
    Had a question on 3ds
  • S @ salazarcosplay:
    will one still be able to transfer pokemon from the ds 3ds games to Switch
  • A @ anotherthing:
    Supposedly Bank isn't going down.
  • StatusN @ StatusN:
    i know they are @anotherthing but i modded m y 3ds last month and i installed pretendo but as my 3ds got banned i need a friend seed to unblock my 3ds
  • A @ anotherthing:
    You got banned from Pretendo?
  • StatusN @ StatusN:
    online ban
  • S @ salazarcosplay:
    @anotherthing I think Nintendo should have just re released all pokemon games on the switch
    +1
  • S @ salazarcosplay:
    let you transfer it all
  • StatusN @ StatusN:
    bank got shutdown in april last year
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, yea the only game they rereleased are the game boy and games boy color ones (remakes don't count)
  • StatusN @ StatusN:
    does anyone have a friend seed link to a seed that isnt already banned and is new, if anyone does then thanks
  • S @ salazarcosplay:
    @Xdqwerty I refuse to get Nintendo Switch online
  • S @ salazarcosplay:
    until they add pokemon mainline games
  • S @ salazarcosplay:
    they could very easily do so
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, i meant that they got rereleased in virtual console in 3ds
  • S @ salazarcosplay:
    @Xdqwerty why cant they do so for the switch :sad:
  • A @ anotherthing:
    Online was free on the 3DS as well, and it worked well.
    A @ anotherthing: Online was free on the 3DS as well, and it worked well.