Hardware PS5 HDMI missing components

flabbaba

Active Member
OP
Newcomer
Joined
Jun 27, 2020
Messages
31
Trophies
0
Age
43
XP
115
Country
Norway
Hi people,

I have a PS5 here, that went through a hell of a repair-attempt from someone watching too much Youtube and never held a soldering iron.

So to make it short, there are components missing....

I not have another board to compare with.

I changed the diode with one from a PS4 board. And I also took a random capacitor and put close to the HDMI-port, after someone in here just said that a PS4 was crowded with 0.1 uF capacitors.

But if we could identify all these, I will make two new photos with the values, so that the community have it for future reference.

Underside.jpg

Topside.jpg

F is not missing, but it would be nice to have the value there anyway.

Thanks for all help.

EDIT: Heres a picture of the underside:
2016_1211_033235_006.jpg
The component in white is a mystery. No readings on my multimeter. No continuity. No Ohms. No readings in capacitor-mode (I can not go lower than a few nF) . The component was tested out of circuit. What can it be?
 
Last edited by flabbaba,
  • Like
Reactions: k28 and FXDX

flabbaba

Active Member
OP
Newcomer
Joined
Jun 27, 2020
Messages
31
Trophies
0
Age
43
XP
115
Country
Norway
If last PICTURE IS referring A and B . I believe A diode is CDZ 5.6B Rohm zener diode. Then B should be 100nf capacitor

Yes, you are correct about the picture. Probably about the values too :-) Thank you so much. Highly appriciated!
 

jkyoho

Well-Known Member
Member
Joined
Sep 2, 2020
Messages
1,270
Trophies
0
Age
39
Location
TORONTO
Website
form.jotform.com
XP
2,201
Country
Canada
Last edited by jkyoho,
  • Like
Reactions: Nagaa

Publicpolicyadvocate

New Member
Newbie
Joined
Aug 5, 2021
Messages
1
Trophies
0
Age
39
XP
36
Country
United States
Please fix that picture with the part numbers.

The original pin 13 diode wasn't a DZ2705600L. That was the "DJ" diode. The pin 13 diode was a DA2J101, but Sony is using a combination of "Nexperia BAS 316, 115" (A6 code) and some other general purpose fast-switching diode marked "C1" these days.

It would be great if someone had a part number for the 27kohm resistor too.
 

jkyoho

Well-Known Member
Member
Joined
Sep 2, 2020
Messages
1,270
Trophies
0
Age
39
Location
TORONTO
Website
form.jotform.com
XP
2,201
Country
Canada
Please fix that picture with the part numbers.

The original pin 13 diode wasn't a DZ2705600L. That was the "DJ" diode. The pin 13 diode was a DA2J101, but Sony is using a combination of "Nexperia BAS 316, 115" (A6 code) and some other general purpose fast-switching diode marked "C1" these days.

It would be great if someone had a part number for the 27kohm resistor too.
27Kohm resistor size is 0402, parts number varies from brands you pick
 

Attachments

  • PS5 PORT.jpg
    PS5 PORT.jpg
    972 KB · Views: 376

allservice1981

New Member
Newbie
Joined
Sep 10, 2021
Messages
1
Trophies
0
Age
43
XP
39
Country
Serbia, Republic of
Work with ordinary zener diode.
 

Attachments

  • 20210909_085603.jpg
    20210909_085603.jpg
    1.2 MB · Views: 331
  • IMG-20d1f12271146d64152a3615265fa4f0-V.jpg
    IMG-20d1f12271146d64152a3615265fa4f0-V.jpg
    583.8 KB · Views: 391

Mariofomil10

New Member
Newcomer
Joined
Dec 31, 2021
Messages
2
Trophies
0
Age
31
XP
32
Country
Egypt
Hi people,

I have a PS5 here, that went through a hell of a repair-attempt from someone watching too much Youtube and never held a soldering iron.

So to make it short, there are components missing....

I not have another board to compare with.

I changed the diode with one from a PS4 board. And I also took a random capacitor and put close to the HDMI-port, after someone in here just said that a PS4 was crowded with 0.1 uF capacitors.

But if we could identify all these, I will make two new photos with the values, so that the community have it for future reference.

View attachment 258699

View attachment 258698

F is not missing, but it would be nice to have the value there anyway.

Thanks for all help.

EDIT: Heres a picture of the underside:
View attachment 260632
The component in white is a mystery. No readings on my multimeter. No continuity. No Ohms. No readings in capacitor-mode (I can not go lower than a few nF) . The component was tested out of circuit. What can it be?
I have a question if d is missing is that a big thing or would it make the hdmi port doesn’t work
 

Abdul2

New Member
Newbie
Joined
Feb 20, 2022
Messages
1
Trophies
0
Age
28
Location
Kaduna
XP
27
Country
Nigeria
Hello greetings
Please i need help with the direction for
the pads on ps5 hdmi ripped pads connection details.
 

Attachments

  • Screenshot_20220208-123135_YouTube.jpg
    Screenshot_20220208-123135_YouTube.jpg
    636.8 KB · Views: 276

Pcb247

New Member
Newbie
Joined
Jul 29, 2022
Messages
2
Trophies
0
Age
37
Location
Lincolnshire
XP
29
Country
United Kingdom
Hi guys ive got a short on a small cap very near hdmi and also short on diode on other side, i removed both, also port and encoder ic but short is still present. Any ideas pls?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    K3Nv2 @ K3Nv2: Sak is a fishy pineapple