Thanks! I only just said to someone else on another post about looking at getting a phone today! at least with a model type i might be able to get hold of a second hand one! do you think the active ones work the same way? I have read they support nfc and if it's hard wearing then i wont be scared to drop it lol.
Thanks! I only just said to someone else on another post about looking at getting a phone today! at least with a model type i might be able to get hold of a second hand one! do you think the active ones work the same way? I have read they support nfc and if it's hard wearing then i wont be scared to drop it lol.
Can I scan the tags more than once? the tags I ordered said re-writable on them.
I dont know what youre referring to. If you could link a picture of the cards youre talking about I could maybe help point you in the right direction.
Signatures only show up in the desktop website. Not on mobile (its kind of annoying) but the link to the mega thread is actually in the OP. I can edit it to make that more clear I suppose.
Yes, I just ask people dont sell them.
You can print them at whatever thickness you want. I chose 100lb stock worked pretty good (note if you are going to sandwich the NFC sticker in between a back and front piece you will be doubling up the thickness).
You need NTAG215 NFC tags. And once you write to them they get locked. They are not able to be reused.
Hi @Random11,
Thank you so much for this excellent work!
I have same question as DarKOrange, but i've 5.4cm x 8.55cm NFC cards and I struggle to resize your jpg as it is not the same aspect ratio and I tried using your Photoshop template and how can I print it with this size
Thank you very much once again.
Thank you so much for this excellent work!
I have same question as DarKOrange, but i've 5.4cm x 8.55cm NFC cards and I struggle to resize your jpg as it is not the same aspect ratio and I tried using your Photoshop template and how can I print it with this size
Thank you very much once again.
Hi @Random11,
Thank you so much for this excellent work!
I have same question as DarKOrange, but i've 5.4cm x 8.55cm NFC cards and I struggle to resize your jpg as it is not the same aspect ratio and I tried using your Photoshop template and how can I print it with this size
Thank you very much once again.
Thank you so much for this excellent work!
I have same question as DarKOrange, but i've 5.4cm x 8.55cm NFC cards and I struggle to resize your jpg as it is not the same aspect ratio and I tried using your Photoshop template and how can I print it with this size
Thank you very much once again.
Ahhh, @Random11 it was here that I thanked you like 2 years ago. Anyway, Thank you again!
Glad you liked my designs enough to get them printed!Full NFC card set from China finally arrived. Pretty good and fairly cheap for $80 (162 cards).
Quick snap at work of some of them but will try and post a bit more later. Cards are quite thick, and bit thicker in the center due to the NFC chips. Overall pretty good quality, with a few tiny bumps on the edges probably from shipping but not worried about that.
Will be testing and copying data to them tonight!
I like it, it looks great. I am obsessed with anime, I love all anime products I can get my hands on, especially postcards. I have different posters with famous anime heroes on the walls in my room. This Christmas, my friends gave me, as a gift, a cool bed linen set with a nice anime body pillow. It is very soft and nice. More than that, the print is so bright and stylish that it fits the entire design of my room perfectly. And this means that I don't need to use anything else to make the bed.
Last edited by RutheFordsSb,
@Random11 Just wondering if you have any interest in doing cards for Zelda & Loftwing and the Metroid Dread amiibo. I managed a passable Zelda & Loftwing card using your template (which I can't share because new user), but I wouldn't know where to start on the Dread cards.
In any case, thanks for all your work! Thanks to your card layouts, I have a great set of half-sized cards for travel that I adore!
In any case, thanks for all your work! Thanks to your card layouts, I have a great set of half-sized cards for travel that I adore!
ill look into doing the metroid ones.
Heres loftwing for those that are looking. (available in my mega folder... linked in op and signature)
Heres loftwing for those that are looking. (available in my mega folder... linked in op and signature)
Last edited by Random11,
Excellent job, I was looking forward to it, I love your work, it's a great contribution to the gamer community
Thanks!
I took a shot at the Metroid cards and managed something close, but I wasn't able to find a good source for the red space image without it being cropped too short. Also, I couldn't find any transparent images of Samus and E.M.M.I., and cropping a white robot off a white background was less than fun. Hopefully you have better luck with it than I did. In any case, thanks for all your hard work on these!
So far it looks like the most annoying part is going to be recreating the smoke for the bottom half of the card and the sparks that are in front of samus and emmi.... Pretty busy right now so I probably wont get around to it for a few weeks. But I'll post when I have something.
working on a monster hunter set.... hows this look?
Last edited by Sanoblue,
, Reason: Edited to add
I realized very quickly that the sparks were beyond my skill set and totally forgot about them until you mentioned it.
For the smoke, I managed something very close to the original by downloading a high resolution stock video of smoke, grabbing a still frame from it, and putting it under a layer of white at 40% opacity. It's not accurate down to each wisp or anything, but I wasn't finding what I needed from Nintendo, so it's not bad.
Fair enough!
-
-
-
@
SylverReZ:
If you want a good system to port it to, at least have a good programmer and knowledge.+1 -
-
-
-
@
Psionic Roshambo:
I didn't know they made an MSU cart for the Genesis.... I knew about the SNES one and the library for that is rather large but the Genesis one has very few games+1
-
-
@
SylverReZ:
An FPGA could probably replicate the chip's functionality without buying donor parts.+1
-
-
-
@
Psionic Roshambo:
Like not emulating the entire SNES but just a loader and the enhancement chips perhaps even slightly overclocked like FX-2
-
-
-
-
-
-
-
@
SylverReZ:
@Psionic Roshambo, The Doom NES cartridges, a few batches were made. One was given to AVGN as seen in his Doom video.+1
-
-
@
Sicklyboy:
I finally modeled and 3d printed the new HDD cages I need in order to build my 2nd NAS. Original ones don't fit the mounting holes on the hdds I'm using. Been sitting on this project for over 2 years smfh -
-
@
Sicklyboy:
I'm finally gonna get this NAS racked and powered on tonight, install truenas core, and burn the disks in with badblocks
-
@
Sicklyboy:
Also another 70TB going in the front mount drive bays of this server. 182tb raw, going to probably use a zfs RAID-Z3 for 3 parity disks, so 140TB usable
-
@
Sicklyboy:
I could claw back 14tb by only doing 2 parity disks but I feel like with 13 disks in the RAID I'd be kind of pushing my luck on rebuild time if I encounter a disk failure
