Hacking SWITCH NOOB PARADISE - Ask questions here

DrahosR

Active Member
Newcomer
Joined
Jun 20, 2021
Messages
44
Trophies
0
Age
34
XP
65
Country
Afghanistan
Well if the problem was the card it would explain the freeze. If you don't want to test the card can't help you then.
Thank you for your patience. I am testing the card as we speak, but once again we are talking about 6 SIX different cards, not one. And all act the same. If there were inconsistencies in the behavior of some then cards would be suspicious, but consistent behavior on all, I'd think something is off either with my NS or the exploit itself not accounting for all the minute difference in all revisions of NS.
 

Hayato213

Newcomer
Member
Joined
Dec 26, 2015
Messages
19,731
Trophies
1
XP
20,608
Country
United States
Thank you for your patience. I am testing the card as we speak, but once again we are talking about 6 SIX different cards, not one. And all act the same. If there were inconsistencies in the behavior of some then cards would be suspicious, but consistent behavior on all, I'd think something is off either with my NS or the exploit itself not accounting for all the minute difference in all revisions of NS.

Well wait for the h2testw result , see what it says about the 128GB, if it doesn't says test finish without error then you got a bootleg.
 

DrahosR

Active Member
Newcomer
Joined
Jun 20, 2021
Messages
44
Trophies
0
Age
34
XP
65
Country
Afghanistan
Well wait for the h2testw result , see what it says about the 128GB, if it doesn't says test finish without error then you got a bootleg.
How reliable is this software? I purchased the card off Amazon, I can't imagine Amazon selling Samsung's bootlegs.
 

rs1n

Well-Known Member
Member
Joined
Jul 26, 2013
Messages
309
Trophies
1
XP
1,201
Country
United States
Ok so I finally finished updating my emunand to 12.0.3 while keeping my sysnand on 10.2. I believe I read somewhere that due to the way e-fuses work, the game slot won't work if my emunand is on a newer firmware. Does this mean I need to rip my cartridge games and use those rips from hereon out?
 
Last edited by rs1n,

duidovwud

Active Member
Newcomer
Joined
Dec 11, 2019
Messages
30
Trophies
0
Age
31
XP
212
Country
United States
I’m getting a “checking if the software can be played” error after installing Ultimate Custom Night .nsp. I already updated Atmosphere and firmware to the latest, and got the latest sig patches. I also tried installing with both Tinfoil and Goldleaf. I tried converting to crypto during the install and fixing the archive bit in Hekate. I also tried different .nsp from different sources and tried installing the .xci. I still can’t figure out why this one game does this. Does anyone have any suggestions?
 

Veralyn

Well-Known Member
Member
Joined
May 18, 2019
Messages
128
Trophies
0
Age
31
XP
198
Country
Netherlands
I recently deleted kosmos/hekate? via the tinfoil prompt, but i do like to have the cosmos part back.
How can i do this without losing any info
 
Last edited by Veralyn,

Ferbez

New Member
Newbie
Joined
Jun 25, 2021
Messages
2
Trophies
0
Age
23
XP
38
Country
Russia
Sorry if this question may sound dumb, tried to google and weren't able to find answer. I got both of NAND and emuNAND on 10.2.0, and on boot I got "failed to match warmboot with fuses" while sleep obviously don't work. How can I fix this? I'm on hekate 5.5.7 and Atmosphere 0.19.4. Burnt fuses (ODM 7/6) is 14-0 (HOS: 11.0.0 -12.0.1)
 

DrahosR

Active Member
Newcomer
Joined
Jun 20, 2021
Messages
44
Trophies
0
Age
34
XP
65
Country
Afghanistan
100% accurate, but regardless where you get the card, you have to test the card, I bought a 1TB and I tested the card.
Warning: Only 122590 of 122591 MByte tested.
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 15.5 MByte/s
Reading speed: 18.3 MByte/s
H2testw v1.4
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,986
Trophies
2
Age
29
Location
New York City
XP
13,326
Country
United States
Ok so I finally finished updating my emunand to 12.0.3 while keeping my sysnand on 10.2. I believe I read somewhere that due to the way e-fuses work, the game slot won't work if my emunand is on a newer firmware. Does this mean I need to rip my cartridge games and use those rips from hereon out?
If you already updated your cartridge slot, then the answer is yes. Otherwise if it hasn't been updated yet by using nogc, then you can continue to play cartridges normally.

I’m getting a “checking if the software can be played” error after installing Ultimate Custom Night .nsp. I already updated Atmosphere and firmware to the latest, and got the latest sig patches. I also tried installing with both Tinfoil and Goldleaf. I tried converting to crypto during the install and fixing the archive bit in Hekate. I also tried different .nsp from different sources and tried installing the .xci. I still can’t figure out why this one game does this. Does anyone have any suggestions?
Where did you download the patches from? Not all places have the most up-to-date patches.

I recently deleted kosmos/hekate? via the tinfoil prompt, but i do like to have the cosmos part back.
How can i do this without losing any info
https://sdsetup.com/

Sorry if this question may sound dumb, tried to google and weren't able to find answer. I got both of NAND and emuNAND on 10.2.0, and on boot I got "failed to match warmboot with fuses" while sleep obviously don't work. How can I fix this? I'm on hekate 5.5.7 and Atmosphere 0.19.4. Burnt fuses (ODM 7/6) is 14-0 (HOS: 11.0.0 -12.0.1)
Your fuses are meant for a higher firmware than the one you are currently on. Did you downgrade? And do you own a Mariko or Erista unit?
 

Veralyn

Well-Known Member
Member
Joined
May 18, 2019
Messages
128
Trophies
0
Age
31
XP
198
Country
Netherlands
I also did a fake link nintendo account via Tinfoil, how can i remove this fake account without deleting all my previous data?
 

GSR325

Well-Known Member
Member
Joined
Jun 12, 2018
Messages
145
Trophies
0
Age
53
XP
156
Country
United States
good morning, I keep getting errors when I try to install my games onto my sd card using Awoo, Tinfoil, and Goldleaf.
 

Hayato213

Newcomer
Member
Joined
Dec 26, 2015
Messages
19,731
Trophies
1
XP
20,608
Country
United States
Warning: Only 122590 of 122591 MByte tested.
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 15.5 MByte/s
Reading speed: 18.3 MByte/s
H2testw v1.4

Card looks fine, looks like you issue is something else. Perhaps reformat card and try new cfw files.
 

Ferbez

New Member
Newbie
Joined
Jun 25, 2021
Messages
2
Trophies
0
Age
23
XP
38
Country
Russia
Your fuses are meant for a higher firmware than the one you are currently on. Did you downgrade? And do you own a Mariko or Erista unit?
It's Mariko unit with SXCore chip. Nevermind - as I said before that was pretty dumb question, I upgraded to 12.0.3 with Daybreak and now everything works perfect.
 
  • Like
Reactions: Draxzelex

rs1n

Well-Known Member
Member
Joined
Jul 26, 2013
Messages
309
Trophies
1
XP
1,201
Country
United States
If you already updated your cartridge slot, then the answer is yes. Otherwise if it hasn't been updated yet by using nogc, then you can continue to play cartridges normally.

How would I know if the slot has been updated? I don't want to accidentally update it by haphazardly testing the nogc and/or autonogc flag (unless that's not possible). All I did was update atmosphere and hekate, then updated my emuMMC via daybreak with the official firmware copied to my SD card. (Never booted into stock/retail mode ever since my initial CFW install back on 10.2) However, I'm not sure whether I need to change my hekate_ipl.ini file. And what happens if I load fusee-primary rather than hekate > fusee-primary or hekate > fusee-secondary? Does going straight from fusee-primary bypass the hekate_ipl.ini file?

My hekate_ipl.ini shows autonogc=1 but I'm not sure what that setting means. Does autonogc=1 mean that nogc has been enabled (i.e. is this the same as nogc=1? or is it actually nogc=0?) And does nogc=1 mean enable "no game cartridge" (i.e. no update)? All the auto's and the double negations have me confused.

EDIT: here my is hekate_ipl.ini if it is useful in any way.
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
{------ Atmosphere ------}
{Pick this option to launch CFW.}
[Atmosphere]
payload=atmosphere/fusee-primary.bin
{}
{------ Stock ------}
{NOTE: This option does not launch CFW.}
[Stock]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1
{}
 
Last edited by rs1n,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    LeoTCK @ LeoTCK: yes for nearly a month i was officially a wanted fugitive, until yesterday when it ended