PS1/2 SCPH-30001 PSU Mod?

Sturgies · May 13, 2021

Hey all,

Recently immigrated from Canada to the UK. Most of my consoles either have a 110v-240v internal PSU or have an easily replaced external PSU brick cable.

My PS2 30001 is not one of these consoles. If anyone knows if I can swap the current PSU with one that will work with 240v mains, I would be grateful!

I'm fairly skilled at hobby level electronics tinkering, and routinely disassemble my consoles for cleaning, so I'm very confident in my ability to do a swap.

Hayato213 · May 13, 2021

You need a step down converter.

Uiaad · May 13, 2021

Should be able to switch out the power board on ps2's no problem tho I would stick with like for like ie if you have a 3000x console you would want to switch it out for another 3000x console as I believe there are some slight variations with each model.
As @Hayato213 mentioned you could also use a step-down converter which would work too but from the sounds of it you would rather have everything internal rather than having another box between the ps2 and the wall.

Sturgies · May 13, 2021

Hayato213 said:
You need a step down converter.

I'm aware a step-down is the recommended way. But I'm looking for an integrated solution. Sincerely though, thanks for the reply!

--------------------- MERGED ---------------------------

Uiaad said:
Should be able to switch out the power board on ps2's no problem tho I would stick with like for like ie if you have a 3000x console you would want to switch it out for another 3000x console as I believe there are some slight variations with each model.
As @Hayato213 mentioned you could also use a step-down converter which would work too but from the sounds of it you would rather have everything internal rather than having another box between the ps2 and the wall.

Part of my issue is finding a list of what models are from which regions, are there 3000x models with a 240v PSU?

Hayato213 · May 13, 2021

Sturgies said:
I'm aware a step-down is the recommended way. But I'm looking for an integrated solution. Sincerely though, thanks for the reply!

--------------------- MERGED ---------------------------

Part of my issue is finding a list of what models are from which regions, are there 3000x models with a 240v PSU?

Then you would have to source a SCPH-30003 model that is uk specific.

https://playstationdev.wiki/ps2devwiki/index.php?title=SKU_Models

Sturgies · May 13, 2021

Hayato213 said:
Then you would have to source a SCPH-30003 model that

PERFECT! THIS IS THE INFO I'VE BEEN LOOKING FOR!!
Thank you SO FREAKIN MUCH!

subcon959 · May 13, 2021

Open it up and check the power supply pcb, you never know it might accept 100-240V.

Sturgies · May 13, 2021

subcon959 said:
Open it up and check the power supply pcb, you never know it might accept 100-240V.

I will, just from what I've seen online the PS3 has a 100v-240v PSU but the fat PS1 and PS2 do not. The explanation was that due to PS1/2 era tvs being either PAL or NTSC they had to manufacture them with different components anyway.
There's also a fair bit of forum posts that are asking if a unit is recoverable after having plugged it in to a socket with the wrong voltage and hz.
Oddly enough, I've disassembled my ps2 numerous times to clean the guts but never thought to check and see what the required input for the PSU is.

KleinesSinchen · May 13, 2021

Didn't quite capture this very well, but anyway:

There are two spots that say 250V ~

subcon959 · May 13, 2021

Sturgies said:
I will, just from what I've seen online the PS3 has a 100v-240v PSU but the fat PS1 and PS2 do not. The explanation was that due to PS1/2 era tvs being either PAL or NTSC they had to manufacture them with different components anyway.
There's also a fair bit of forum posts that are asking if a unit is recoverable after having plugged it in to a socket with the wrong voltage and hz.
Oddly enough, I've disassembled my ps2 numerous times to clean the guts but never thought to check and see what the required input for the PSU is.

It's very unlikely but you never know. The good news is that the equivalent UK PS2 is pretty cheaply available on ebay, just look out for the models where there is an iLink port next to the bottom USB port on the front.

Sturgies · May 13, 2021

I'm just going to buy the PSU. ~£9+Shipping

--------------------- MERGED ---------------------------

KleinesSinchen said:
Didn't quite capture this very well, but anyway:

View attachment 262828

There are two spots that say 250V ~

Is yours a 30001? My understanding was that the PSU in the 30001 model is 110v only

KleinesSinchen · May 14, 2021

Sturgies said:
I'm just going to buy the PSU. ~£9+Shipping

--------------------- MERGED ---------------------------

Is yours a 30001? My understanding was that the PSU in the 30001 model is 110v only

Sorry. Should have mentioned this. It is PAL/European. SCPH-30004
As the PSU has printed 250V ~ on it and not a range I assume it is limited to countries with the higher voltage (and I assume the 30001 PSU will have printed lower values on it).

PS1/2 SCPH-30001 PSU Mod?

Member

Newcomer

GBAtemp's resident guinea pig

Member

Newcomer

Member

@!#?@!

Member

GBAtemp's Backup Reminder + Fearless Testing Sina

@!#?@!

Member

GBAtemp's Backup Reminder + Fearless Testing Sina

Similar threads

Popular threads in this forum