WAIT!, what?, STFU theres not only V2'ish but now there is a V3? i did some testing of goldhen for @Joonie and @sistro . what version of hen is beingg used? i found that for my pro 1.1b3 the most stable.
i heard there were improvements to the webkit? is this true a better success rate? i have had my ps4 running first webkit for a couple months now with sleep mode. (as the webkit for me is very unsuccessful) dony want to waste all day to try again lol.
BTW @Prb awesome treats again. thank you. i have used a few different host, but this is my go to!
i heard there were improvements to the webkit? is this true a better success rate? i have had my ps4 running first webkit for a couple months now with sleep mode. (as the webkit for me is very unsuccessful) dony want to waste all day to try again lol.
BTW @Prb awesome treats again. thank you. i have used a few different host, but this is my go to!
this is a different host from my last one
v3 uses bin payloads which is a cleaner way of loading plus the very latest exploit
but out of respect i will not host Joonie goldhen 1.1b3 as its not a public release the b stands for beta it was for trusted tester only
and they let him down by sharing it this has goldhen v1.0 / goldhen v1.1 / henb / mirab
i do have goldhen 1.1b3 but i will not add it unless Joonie him self says its ok to do so
give this menu a go it very good but if you find v2ish works better you can always just switch back
but in my opinion v3 is better
Hi. I follow all the steps and for some reason offline caching keeps getting stuck at a specific %. If I use userguide it gets stuck at 98% and if I use browser it gets stuck at 76%. Does anyone have any idea why this happens?
couldn't say, but offline cache will fail if something is missing from it. I know that offline cache, at least from what I've encountered, should have no spaces in the html or bin names or else it will fail. it will think the space is the end of the file, then say "failed."
--------------------- MERGED ---------------------------
that's file names btw, because I did try to add in goldhen 1.0 to the payloads folder with xproject, then cache would fail, so I renamed it goldhen_1.0.
--------------------- MERGED ---------------------------
that's file names btw, because I did try to add in goldhen 1.0 to the payloads folder with xproject, then cache would fail, so I renamed it goldhen_1.0.
@Prb , I hope you don't think I was patronizing you. you probably know more than I do about the offline cache, just in general. it's just a simple mistake I made at first when I was learning how xproject worked. it would fail at a certain percentage there as well, once it got to that space in the file name.
--------------------- MERGED ---------------------------
I edited the offline cache manually though. I have the bat you sent me as well as the bat from xproject (they're different as I hex compared them), but I haven't used them yet. I just find it easier to edit what I have, since that's what I know.
--------------------- MERGED ---------------------------
I edited the offline cache manually though. I have the bat you sent me as well as the bat from xproject (they're different as I hex compared them), but I haven't used them yet. I just find it easier to edit what I have, since that's what I know.
no worries buddy i would never take any of your comments like that your a legend only here to help others@Prb , I hope you don't think I was patronizing you. you probably know more than I do about the offline cache, just in general. it's just a simple mistake I made at first when I was learning how xproject worked. it would fail at a certain percentage there as well, once it got to that space in the file name.
the offline cache wa tested on the selfhost most of the time thats good for webhost also
didnt test esp but it should be ok
I tested xproject on my system as well. it was a learning experience with both 1.5.7 and 1.5.8, because the quick section is completely different. I made a mistake with 1.5.7 at first, but I didn't release that one. I only released one that was working 100%. 1.5.8 -- I made no mistakes with the offline cache though, so I guess I learned what not to do.
i make the odd mistake now and again forget ive change a payload name or simply forget to add it lolI tested xproject on my system as well. it was a learning experience with both 1.5.7 and 1.5.8, because the quick section is completely different. I made a mistake with 1.5.7 at first, but I didn't release that one. I only released one that was working 100%. 1.5.8 -- I made no mistakes with the offline cache though, so I guess I learned what not to do.
but tbh most of the time its just user error not clearing the cache first
people just see an update and just try and cache it we have all done it
I've been testing my mods of xproject. there's a weird issue with 1.5.8 where you have to go to another website (even if made up) to purge memory of the previous version. I think it's due to how the quick menu is setup, because it's the only one affected. it now says like Quick1A for name, Quick1C for description, etc. it's now tied to the settings javascript file. 1.5.7 would have all the info in the index file. I think 1.5.8 allows you to change what's in the quick menu, so I think that's why it's like that.
Eventually I got through offline caching using this one: https://prb-borg.github.io/v3in/index.html
Then I tried running the new exploit, it failed twice (which I read is normal) and rebooted after each attempt like the message said. Then on the third and forth try my console just rebooted after pressing the button, without even logging a failed attempt (it's still at 2 failures). At this point I got kind of scared for my console, not sure if that's normal instability or a problem that I caused by doing something wrong, so I'm calling it a day for now and I'll do more research tomorrow.
Hope my amateurishness isn't too bothersome. Thanks you very much to both of you for responding so fast to my question before, I really appreciate it!
goldhen is v1.1 the latest just use new or old exploit the old exploit is the same one as you was using in v2ish
--------------------- MERGED ---------------------------
your fine buddy happy to help
just use new or old exploit the old exploit is the same really its just the new one has a fastest loading time
try loading the webkit let it sit at the menu for 30 secs and then run one of the exploits
im off to bed now got to get up for work at 5am yes i said 5am lol
good luck just keep trying when you get the exploit to run use goldhen v1.1 and dont turn off ps4 just let it go into rest mode
ok just loaded the menu and clicked new exploit, kp. so the "new exploit is AIO? webkit then exploit . im confused lol. or is the menu the webkit? sorry first day off in 2 weeks and beat up enjoying my edibles
goldhen is v1.1 the latest just use new or old exploit the old exploit is the same one as you was using in v2ish
--------------------- MERGED ---------------------------
your fine buddy happy to help
just use new or old exploit the old exploit is the same really its just the new one has a fastest loading time
try loading the webkit let it sit at the menu for 30 secs and then run one of the exploits
im off to bed now got to get up for work at 5am yes i said 5am lol
good luck just keep trying when you get the exploit to run use goldhen v1.1 and dont turn off ps4 just let it go into rest mode
its a manual menu let webkit load first then try one of the exploits as i said to weefsat try and let it sit for 30 to 60 secs before running one of the exploits new or old when you get a pass load goldhen v1.1ok just loaded the menu and clicked new exploit, kp. so the "new exploit is AIO? webkit then exploit . im confused lol. or is the menu the webkit? sorry first day off in 2 weeks and beat up enjoying my edibles
--------------------- MERGED ---------------------------
good luck i really got to go a sleep now 5am 5am
its a manual menu let webkit load first then try one of the exploits as i said to weefsat try and let it sit for 30 to 60 secs before running one of the exploits new or old when you get a pass load goldhen v1.1
--------------------- MERGED ---------------------------
good luck i really got to go a sleep now 5am 5am
Please go to sleep on 12am night better. btw that why you was busy at anytime
Anyone having issues getting PS4cheater to attach? I send payload and debug is attached but the cheater itself fails to connect. Worked on 1.1b3 of the betas. maybe I’ll use the
Menu but use bin loader to send the beta and try that. Maybe it’s the new hen ? I report back
Menu but use bin loader to send the beta and try that. Maybe it’s the new hen ? I report back
Similar threads
-
Veho
-
K3Nv2
-
DinohScene
That cat suit twink
-
-
-
@
SylverReZ:
@Maximumbeans, Indeed. I've been working on getting this Infecutus chip to work on my PS2. But after soldering, I realised that a plastic piece was missing from the power ribbon cable to the power and eject buttons. -
@
SylverReZ:
Now I could go with soldering the contacts from the cable to the connector on the mobo, but doesn't sound like a good permanent solution.
-
@
Maximumbeans:
Man, that's beyond my brain I'm no good with hardware for now. I'd like to get into hardmods in future though -
@
SylverReZ:
@Maximumbeans, Maybe start practice soldering. Get a cheap-ass soldering iron and follow some good YouTube tutorials.+1
-
@
SylverReZ:
Least my experience has gotten better than over a decade ago. My iron would constantly bump into components and break them.
-
@
Maximumbeans:
Sounds good. I actually did soldering but like 16 years ago for school so uuuuh probably rusty haha
-
@
SylverReZ:
@Maximumbeans, Same here. I did soldering at school from a teacher who I honestly liked since he had plenty of good electronics experience.+1
-
-
-
-
-
@
SylverReZ:
It was like all clear and fancy. Tbf I'm not too experienced with chess, but would like to learn someday.
-
-
-
-
-
-
-
-
-
-
-