“Baking the Card in the Oven to re-melt non-visible Solder,that it would automatically reflow and repair the Connection."
A 50 Percent Change,sometimes it works:
Sometimes the User had no Idea/no Patience....
Hardware Absolute NO GO´s in PC Building - Hopefully not from yourself please...
- Thread starter Alexander1970
- Start date
- Views 3,857
- Replies 34
- Likes 3
A 50 Percent Change,sometimes it works:
Sometimes the User had no Idea/no Patience....
But what helps the Best PC Assembler,when the Parts are not coming in the correct "Shape":
I wonder why he opened it at all? He should have returned it as is, and ask for his money back.
Maybe to check there IS an Card inside.
I think he could not believed it how this Package look like....
Last edited by Alexander1970,
Just heat it up in oven and bend back in place....will be fine.Maybe to check ther IS an Card inside.
I think he could not believed it how this Package look like....
Warning: may void your warranty!Just heat it up in oven and bend back in place....will be fine.
Cables.....
###########################################################################
Wrong CPU or wrong Socket or both or nothing from that ?
###########################################################################
Wrong CPU or wrong Socket or both or nothing from that ?
D
Deleted User
Guest
what if you genuinely have too much cables to fit in a case? at least this guy used the back of the case where the cables are supposed to go
also, single channel ram
There are easier ways to short the PC, or burn down the house.
guys don't forget to scrape off the protective pins on the cpu
That's a PlayStation 2, but yeah.
It's just a webcrawler. I can tell you this is an older version. Must be a Lycos or early Google.
Similar threads
-
Veho
-
The Real Jdbye
*is birb*
-
@
Psionic Roshambo:
Shawnita used to get her pills from some other street pharmacist and after switching to The Psi Discount plan she now only has to swallow two things a day!+1 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
The Real Jdbye:
i have that stupid connector on my gpu luckily it's only a 300w gpu so i should(?) be fine since all the issues are with the quad 8pin->12pin and mine is only dual 8pin
-
-
-
@
The Real Jdbye:
quite a tight bend on that 8pin->12pin adapter in my case, which is the worst case scenario, but i made sure it was fully seated after plugging everything in and bending the cable so it shouldn't come unseated by itself since i pre-stressed the cable
-
