Hacking SWITCH NOOB PARADISE - Ask questions here

Ibcap · Apr 21, 2021

neontiger said:
Tried both approaches mentioned in the "Alternate boot setups" section of the NH Switch Guide (nh-server)
1. Adding fusee-primary.bin in bootloader, modifying hekate_ipl.ini, pushing the Hekate payload and selecting Launch -> Atmosphere. Result is black screen after both the Hekate and Atmosphere logo.
2. Pushing the fusee-primary.bin payload. Result is black screen after the Atmosphere logo.

Sounds like the nand youre booting is messed up to me, although i cant be 100% certain.

neontiger · Apr 21, 2021

Ibcap said:
Sounds like the nand youre booting is messed up to me, although i cant be 100% certain.

A user on another message board suggested that upgrading solved the problem.
Is there any method to upgrade the emuNAND of CFW without burning fuses or altering the OFW version (4.1.0) in any way?

Ibcap · Apr 21, 2021

neontiger said:
A user on another message board suggested that upgrading solved the problem.
Is there any method to upgrade the emuNAND of CFW without burning fuses or altering the OFW version (4.1.0) in any way?

Yes but it would require being able to boot into the emunand, which you obviously cant do.

Tinoator · Apr 21, 2021

Hey friends,

trying to use quark & goldleaf to install an NSP but I keep getting the same error. I've updated my sigpatches (at least I believe I have) and am still getting an error.

invalid nca (might mean missing sigpatches or a too low firmware) (4518)

Any ideas?

Draxzelex · Apr 21, 2021

Tinoator said:
Hey friends,

trying to use quark & goldleaf to install an NSP but I keep getting the same error. I've updated my sigpatches (at least I believe I have) and am still getting an error.

invalid nca (might mean missing sigpatches or a too low firmware) (4518)

Any ideas?

Try using TinWoo Installer instead.

Tinoator · Apr 21, 2021

I'll give it a shot! Thanks.

Do I put the contents inside the "switch" folder from the TinWoo download into the "switch" folder on my SD Card?

Draxzelex · Apr 21, 2021

Tinoator said:
I'll give it a shot! Thanks.

Do I put the contents inside the "switch" folder from the TinWoo download into the "switch" folder on my SD Card?

Yes.

Tinoator · Apr 21, 2021

Draxzelex said:
Yes.

Sorry for so many questions, but do I still use quark?

Draxzelex · Apr 21, 2021

Tinoator said:
Sorry for so many questions, but do I still use quark?

No, quark is only usable with Goldleaf. There are plenty of alternatives that work with TinWoo Installer such as NS-USBLoader (Java) and Aluminum Foil (python).

Tinoator · Apr 21, 2021

Draxzelex said:
No, quark is only usable with Goldleaf. There are plenty of alternatives that work with TinWoo Installer such as NS-USBLoader (Java) and Aluminum Foil (python).

Trying out NS-USBLoader and I keep getting the error that reads:

OpenFileSystemWithId:122: Failed to open file system with id:
............ Error code: 0x00234c02

Ibcap · Apr 21, 2021

Tinoator said:
Trying out NS-USBLoader and I keep getting the error that reads:

OpenFileSystemWithId:122: Failed to open file system with id:
............ Error code: 0x00234c02

Did you install the driver and set nsusbloader to tinfoil?

Tinoator · Apr 21, 2021

Ibcap said:
Did you install the driver and set nsusbloader to tinfoil?

I did set it to Tinfoil, but which driver are you talking about?

Ibcap · Apr 21, 2021

Tinoator said:
I did set it to Tinfoil, but which driver are you talking about?

There should be a driver installer option within the program. I dont use nsusbloader so im not sure where it is, but its in a menu somewhere.

Tinoator · Apr 22, 2021

Ibcap said:
There should be a driver installer option within the program. I dont use nsusbloader so im not sure where it is, but its in a menu somewhere.

Well, I checked and installed the drivers. Ran through the motions again and......same outcome as before!

--------------------- MERGED ---------------------------

Here's my screen:

Ibcap · Apr 22, 2021

Tinoator said:
Well, I checked and installed the drivers. Ran through the motions again and......same outcome as before!

--------------------- MERGED ---------------------------

Here's my screen:View attachment 259525

Most likely issue in my opinion is with sigpatches. Try installing tinfoil, if you can successfully get into tinfoil then it might give more info on the error. If you cant, then it proves my theory correct.

Tinoator · Apr 22, 2021

Ibcap said:
Most likely issue in my opinion is with sigpatches. Try installing tinfoil, if you can successfully get into tinfoil then it might give more info on the error. If you cant, then it proves my theory correct.

I just put the tinfoil nro file onto my sd card and tried to launch it from the HB menu and it just reverted me back to the main screen of the HB menu.

Ibcap · Apr 22, 2021

Tinoator said:
I just put the tinfoil nro file onto my sd card and tried to launch it from the HB menu and it just reverted me back to the main screen of the HB menu.

Thats what its supposed to do, its an installer. It runs, installs, and exits.

Tinoator · Apr 22, 2021

Ibcap said:
Thats what its supposed to do, its an installer. It runs, installs, and exits.

Ah, do you have a guide I could reference?

Ibcap · Apr 22, 2021

Tinoator said:
Ah, do you have a guide I could reference?

It installs tinfoil to the home menu. If you dont see tinfoil there and instead see a spinning icon, that meant i was right and youre missing sigpatches.

Tinoator · Apr 22, 2021

Ibcap said:
It installs tinfoil to the home menu. If you dont see tinfoil there and instead see a spinning icon, that meant i was right and youre missing sigpatches.

Ah!! I see a spinning icon. Any guides for sigpatches? Thought I updated them, but I must have been mistaken.

Hacking SWITCH NOOB PARADISE - Ask questions here

Well-Known Member

Active Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Similar threads

Popular threads in this forum