Homebrew RELEASE NS-USBloader - another one Tinfoil and GoldLeaf USB installer

peteruk · Dec 25, 2020

StarGazerTom said:
I'm going to readback the thread incase it was covered, but I'm having an issue with this.

Latest NS-USBLoader & AwooInstaller.

During installation, probably about 3/5 minutes in, AwooInstaller crashes and thus NS-USBLoader stops sending data.

Fresh install of latest Atmosphere with 10.3 (I believe, I know it's 10.x anyways).

Seems like installing through USB is rather very unstable?

I used to have this problem to, make sure you have the very latest build of Awoo & ns loader

Deleted User · Dec 25, 2020

peteruk said:
I used to have this problem to, make sure you have the very latest build of Awoo & ns loader

I'll double check that I have latest on both. A similar issue was track back on page 10, so atleast it's common enough I know that it's not a me problem, which today is nice.

LyuboA · Dec 25, 2020

StarGazerTom said:
I'll double check that I have latest on both. A similar issue was track back on page 10, so atleast it's common enough I know that it's not a me problem, which today is nice.

you can try Tinleaf its an Awoo Fork and it works great with latest NS-USBLoader

Deleted User · Dec 25, 2020

LyuboA said:
you can try Tinleaf its an Awoo Fork and it works great with latest NS-USBLoader

Cool, I'll give that a try too once the switch isn't being used tonight. Thanks for the tip.

developer_su · Dec 25, 2020

StarGazerTom said:
I'm going to readback the thread incase it was covered, but I'm having an issue with this.

Latest NS-USBLoader & AwooInstaller.

During installation, probably about 3/5 minutes in, AwooInstaller crashes and thus NS-USBLoader stops sending data.

Fresh install of latest Atmosphere with 10.3 (I believe, I know it's 10.x anyways).

Seems like installing through USB is rather very unstable?

Are you starting Awoo in applet mode? Try title override method (hold r while opening a game).
IDK, works for me.. On AMS v10.1.0

Deleted User · Dec 25, 2020

developer_su said:
Are you starting Awoo in applet mode? Try title override method (hold r while opening a game).
IDK, works for me.. On AMS v10.1.0

Tried both, happened in both. I'll be trying the suggestions I go earlier in a little while anyways.

LyuboA · Dec 26, 2020

StarGazerTom said:
Tried both, happened in both. I'll be trying the suggestions I go earlier in a little while anyways.

try another usb cable

Deleted User · Dec 26, 2020

LyuboA said:
try another usb cable

Can't be the cable, I've tried it with 2 different cables now, installing stuff from a usb drive through the dock sometimes crashes too. Not using Exfat, sd card comes up as clean and healthy. And my crashes don't always happen. It's weird, annoying, but I'm getting some stuff installed now. Most 99% of my crashes are when I'm installing to the internal nand (in this case, Internal Nand is EmuNand).

LyuboA · Dec 26, 2020

StarGazerTom said:
Can't be the cable, I've tried it with 2 different cables now, installing stuff from a usb drive through the dock sometimes crashes too. Not using Exfat, sd card comes up as clean and healthy. And my crashes don't always happen. It's weird, annoying, but I'm getting some stuff installed now. Most 99% of my crashes are when I'm installing to the internal nand (in this case, Internal Nand is EmuNand).

then it must be something with you sd card it may shows as healthy but dosnt mean that it is
and you dont have to install the game directly on your Nand - EmuNAND you can install them on the sd card and then just move them from setting

Deleted User · Dec 26, 2020

LyuboA said:
then it must be something with you sd card it may shows as healthy but dosnt mean that it is
and you dont have to install the game directly on your Nand - EmuNAND you can install them on the sd card and then just move them from setting

Yeah I've taken to doing just that. Install it to the SD card itself, then moving them to the EmuNand-nand.

Atleast it's working! Thanks for the tips folks.

JackWWFC · Dec 27, 2020

I keep getting ''NS not found in connected USB devices''

I have used Zadig to install drivers as explained, administrator mode, and in device manager there is 'LibUSKBK' device, underneath there is Tinfoil(Interface 0) and Tinfoil (Interface 1)

What am I doing wrong? I'm using a USB A>C on Windows 10, using the latest release from Git. The cable is fine for data transfer as I use it for other devices.

LyuboA · Dec 28, 2020

JackWWFC said:
I keep getting ''NS not found in connected USB devices''

I have used Zadig to install drivers as explained, administrator mode, and in device manager there is 'LibUSKBK' device, underneath there is Tinfoil(Interface 0) and Tinfoil (Interface 1)

What am I doing wrong? I'm using a USB A>C on Windows 10, using the latest release from Git. The cable is fine for data transfer as I use it for other devices.

are you trying to install games with Tinfoil better use installers like Awoo, Tinleaf or TinWoo
when connected if installed properly in device manager under Libusbk should says "Nintendo Switch" when you open one of these
installers it should change to "Nintendo Switch (Homebrew mode)"
then just pick "Install Over USB" and use NS-USBLoader to send the game files

JackWWFC · Dec 28, 2020

LyuboA said:
are you trying to install games with Tinfoil better use installers like Awoo, Tinleaf or TinWoo
when connected if installed properly in device manager under Libusbk should says "Nintendo Switch" when you open one of these
installers it should change to "Nintendo Switch (Homebrew mode)"
then just pick "Install Over USB" and use NS-USBLoader to send the game files

I will try this today, thank you.

EDIT - yes it works with Awoo, cool.

blawar · Dec 28, 2020

JackWWFC said:
I keep getting ''NS not found in connected USB devices''

I have used Zadig to install drivers as explained, administrator mode, and in device manager there is 'LibUSKBK' device, underneath there is Tinfoil(Interface 0) and Tinfoil (Interface 1)

What am I doing wrong? I'm using a USB A>C on Windows 10, using the latest release from Git. The cable is fine for data transfer as I use it for other devices.

Tinfoil does not work with ns-usbloader, use nut: https://github.com/blawar/nut

there is a driver exe you should use in releases.

janobi · Jan 1, 2021

blawar said:
Tinfoil does not work with ns-usbloader, use nut: https://github.com/blawar/nut

there is a driver exe you should use in releases.

Does nut require internet access? I've installed it, and can see it's trying to run some python scripts, which I dont appear to have. My box is not internet connected.

Pyrate02 · Jan 10, 2021

I just downloaded the latest version but cannot figure out how to install this on my computer. Instructions for install would be greatly appreciated.

Thanks

Kioku · Jan 10, 2021

Pyrate02 said:
I just downloaded the latest version but cannot figure out how to install this on my computer. Instructions for install would be greatly appreciated.

Thanks

Install Java runtime environment. Then launch the file.

Pyrate02 · Jan 10, 2021

Thanks - I am getting a pop up that says applet mode not supported when opening tinwoo - and I am trying to install a game but nothing is happening. Am I doing something wrong?

Thanks

Pyrate02 · Jan 10, 2021

I tried to use Goldleaf and also Tinfoil - Tinfoil says no installable file found when I ask to install the selected game that I split.

burhansalih · Jan 12, 2021

Pyrate02 said:
Thanks - I am getting a pop up that says applet mode not supported when opening tinwoo - and I am trying to install a game but nothing is happening. Am I doing something wrong?

Thanks

Yes....do it via Title takeover Hold R and run any game you have installed and you should go into the HB Menu then choose Tinwoo and you should no longer get the Applet mode popup

Homebrew RELEASE NS-USBloader - another one Tinfoil and GoldLeaf USB installer

Well-Known Member

Deleted User

Guest

Unknown Entity

Deleted User

Guest

Developer

Deleted User

Guest

Unknown Entity

Deleted User

Guest

Unknown Entity

Deleted User

Guest

New Member

Unknown Entity

New Member

Developer

Member

Well-Known Member

猫。子猫です！

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum