Hardware Did anyone ever tried a RAM upgrade on the switch?
- Thread starter BlackOmegaTM
- Start date
- Views 50,284
- Replies 71
- Likes 2
You need to mess with fuse stuff for L4T too iirc.
Dunno how to do it there though.
--------------------- MERGED ---------------------------
Also, probably a bit of a stretch, but here's another one, same as the previous one, but it's the experimental version with mesosphere, maybe it'll impact something somehow idk.
Also btw, have you been using fusee or hekate? You should be using fusee (I don't think it should make a diff, but idfk).
Same result.
I have rmc-86 chip inside. So I do not know how to start something without hekate.
My config for tests
[config]
autoboot=1
autoboot_list=0
bootwait=3
backlight=40
autohosoff=0
autonogc=0
updater2p=0
{ }
[Atmosphere]
payload=bootloader/payloads/fusee-primary.bin
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/atmosphere.bmp
[config]
autoboot=1
autoboot_list=0
bootwait=3
backlight=40
autohosoff=0
autonogc=0
updater2p=0
{ }
[Atmosphere]
payload=bootloader/payloads/fusee-primary.bin
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/atmosphere.bmp
Try adding and using this config
[Atmosphere fss0]
fss0=atmosphere/fusee-secondary.bin
EDIT: and use this hekate https://mega.nz/file/9V1VkaTK#p2S5Q4LFfVKx8StemtnK-zC-ewezcrRXeAAlTyrwvfk
That'll boot using hekate instead of fusee, maybe it'll make a diff idk. after this I'm out of ideas
Having `atmosphere=1` there is completely pointless btw.
EDIT2: Tried this on my console out of curiosity, while I don't actually have 6gb of RAM, the system does boot with that atmosphere loaded with that hekate via fss0, and Status Monitor does show 6gb.
Last edited by ZachyCatGames,
Can you please provide full sdcard archive with hekate, config and patched atmosphere? Maybe I am doing something wrong.
Great 
I cleaned up my AMS patch a bit and threw it along with my hekate patch and pre-built builds of both here https://mega.nz/folder/4A0xTSbD#M92MMBT-uX4Qxqfi2bVp-A
EDIT: updated the AMS patch and builds again to remove more unnecessary shit, some of the remaining stuff might be unnecessary on systems that actually have 6gb of RAM... but it works and I don't want to poke at it lol
EDIT2: updated AMS stuff again, I've made the patch even smaller now.
I cleaned up my AMS patch a bit and threw it along with my hekate patch and pre-built builds of both here https://mega.nz/folder/4A0xTSbD#M92MMBT-uX4Qxqfi2bVp-A
EDIT: updated the AMS patch and builds again to remove more unnecessary shit, some of the remaining stuff might be unnecessary on systems that actually have 6gb of RAM... but it works and I don't want to poke at it lol
EDIT2: updated AMS stuff again, I've made the patch even smaller now.
Last edited by ZachyCatGames,
Ooo, black-magic at it’s finest...! I’ll be adding this to my to-do list..!
Last edited by CymraegAce,
K4FHE3D4HA-GHCL from aliexpress
I don't want boot to stock and there is no way to see how many RAM is available without homebrew.
Not sure if anyone has mentioned it, but how would a RAM Upgrade help the Switch?
I am guessing I would need someone to Install any new Memory, since it is Soldered onto the Board, correct?
I am guessing I would need someone to Install any new Memory, since it is Soldered onto the Board, correct?
It should boot.
But you wouldn't be able to use the full 6GB, it'd be limited to 4GB unless you patch shit or you enable debug mode (neither of which can be done from stock on retail).
Last edited by ZachyCatGames,
It should be fairly straight forward on Mariko, yeah.
It'd be more complicated on Erista (Horizon doesn't support any 8GB LPDDR4 configurations).
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
@
Xdqwerty:
@Purple_Heart, then I will be actually older than him for a bit (ik thats not how ages work btw) -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
