hey srry for the ignorance, i have an emu nand on my switch, will the patches work if i access atmosphere through fusee injection? (man i hope i got the things right lol)
- Status
Hi, I used them in the new atmosphere FW 10.2.0 0.14.4 | S,
but when i use hbg / shop and choose a game, install on sd card it tells me fail, how can i fix it? it seems as if it no longer recognizes the sd card (fat32). thanks to those who give me a hand.
but when i use hbg / shop and choose a game, install on sd card it tells me fail, how can i fix it? it seems as if it no longer recognizes the sd card (fat32). thanks to those who give me a hand.
Create an entry for it in hekate_ipl.ini.Hey Tokiwa,
Is there a way to auto boot into Fusee-Primary?
I can only choose between CFW sysMMC, CFW emuMMC stock and Fusee..
Any reply will be appreciated
10.2 here as well
Everything works fine besides the new paper mario
when i try to install via gold leaf it tells me im missing the sigpatches or keygens but other than that everything boots fine
waiting on another nsp to finish downloading to see if its goldleaf...
Edit: Wont install any new games dang it
im booting it normally not sure how to boot it just the fusee without it just sitting on black screen after the splash screens
well cant launch in fusee for some reason only hekate will work (fusee wont get to nintendo splash screen)
https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-secondary-only.571543/
tried these and the ones at the begging of the thread and updated .bin file for key launcher
gold leaf keeps giving me this when i try to install anything
2002-4518 (ox234c02
module file system 2
description invalid NCA(might mean missing sig patches or a too low firmwar( 4518)
okay i fixed it and ill explain my last step
took all the patches and new .bin removed all of the new content and backed up to before 10.2
only installed the link in this comment and hekate worked again
sorry idk why fusee isnt launching now but i use a ams pyload injector if that might help
booted it through tegrarcm as well and works that way
Everything works fine besides the new paper mario
when i try to install via gold leaf it tells me im missing the sigpatches or keygens but other than that everything boots fine
waiting on another nsp to finish downloading to see if its goldleaf...
Edit: Wont install any new games dang it
im booting it normally not sure how to boot it just the fusee without it just sitting on black screen after the splash screens
well cant launch in fusee for some reason only hekate will work (fusee wont get to nintendo splash screen)
https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-secondary-only.571543/
tried these and the ones at the begging of the thread and updated .bin file for key launcher
gold leaf keeps giving me this when i try to install anything
2002-4518 (ox234c02
module file system 2
description invalid NCA(might mean missing sig patches or a too low firmwar( 4518)
okay i fixed it and ill explain my last step
took all the patches and new .bin removed all of the new content and backed up to before 10.2
only installed the link in this comment and hekate worked again
sorry idk why fusee isnt launching now but i use a ams pyload injector if that might help
booted it through tegrarcm as well and works that way
Last edited by MrSaltySalt,
I am new to Atmosphere. Tried to install some older games and got the error 2002-4518. Then I installed the sigpatches from this thread and the installs worked fine. But when I try to install games such as Dragon Quest Builders 2, Luigi's Mansion 3 or Mario + Rabbids Kingdom Battle - I get the error 2002-4518 again.
Could someone please offer some advise.
Could someone please offer some advise.
I been running directly from hekate.
I tried formatting the SD card and no luck,
Then I removed hekate and booted using fusee and now the problem is gone
Thanks for the response.
Also, I am new to switch hacks/mods, have modded past consoles such as xbox 360, psp and ds. Was wondering if theres anything helpful you could suggest such as anything I should install or some forum topics I should read?
Well birbs guide is pretty good but thats mostly for setup which you seem to have covered now already. For homebrew all i tend to use is installers, nxmtp and retroarch. I got to know things mostly by just talking and watching on discord. And yes I figured you were probably using hekate which is why i asked about the bootloader, you need different patches for thatI been running directly from hekate.
I tried formatting the SD card and no luck,
Then I removed hekate and booted using fusee and now the problem is gone
Thanks for the response.
Also, I am new to switch hacks/mods, have modded past consoles such as xbox 360, psp and ds. Was wondering if theres anything helpful you could suggest such as anything I should install or some forum topics I should read?
Well birbs guide is pretty good but thats mostly for setup which you seem to have covered now already. For homebrew all i tend to use is installers, nxmtp and retroarch. I got to know things mostly by just talking and watching on discord. And yes I figured you were probably using hekate which is why i asked about the bootloader, you need different patches for that
That or chainloading fusee primary
Just updated to 10.2 today, when I use Hekate to boot emummc it keeps giving me the "Failed to apply 'nosigchk'" error even though I've already applied all the latest necessary files/patches. If I boot directly from Fusee then I successfully get into the home screen, and when I check the System Settings it says FW 10.2.0 0.14.4 | S. But none of my games/launchers work. I can't even get into the homebrew menu. What am I doing wrong?
If you have used Hekate sigpatches to install games previous, you will need to go back to that thread: https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-secondary-only.571543/unread
Alternatively, if you want to stick with fusee-primary, you might need to reinstall your games with the fusee-primary sigpatches.
What should it look like..? I'm have no idea whatsoever about editing files with texts..
Thank you for your reply tho!
What should it look like..? I'm have no idea whatsoever about editing files with texts..
Thank you for your reply tho!
If you want to continue using Hekate to load, download the hekate_ipl.inf from birb's guide, and drop this in your bootloader folder. Make sure fusee-primary.bin is /bootloader/payloads/, and choose to autoboot "Atmosphere CFW". If you want to axe Hekate and use fusee-primary only, do not inject Hekate, and just inject fusee-primary.bin. Both options will autoboot emuMMC if properly set up. Easy-peasy.
I'm having this same issue with Yu-Gi-Oh! Legacy of the Duelist Link Evolution. The error tends to happen after a few minutes of gameplay when I'm in a duel.
Last edited by Natural,
After recent events I will no longer be updating this thread and ill be taking down the link from the OP. If someone else wants to post the pack in a new thread they can do so, but its been recommended to me that I do not continue distributing the patches and I have to agree. @linuxares could you lock the thread to avoid confusion?
Last edited by Ibcap,
After recent events I will no longer be updating this thread and ill be taking down the link from the OP. If someone else wants to post the pack in a new thread they can do so, but its been recommended to me that I do not continue distributing the patches and I have to agree. @linuxares could you lock the thread to avoid confusion?
Well thank you for doing what you did up to this point, many of us are very grateful for your efforts on this thread... so thank you.
It's a very sad state of affairs, those celebrating at TX downfall don't seem to grasp the wider consequences of the actions.
Hopefully someone else will take up the challenge.
- Status
Similar threads
-
Veho
-
K3Nv2
-
DinohScene
That cat suit twink
-
-
-
@
SylverReZ:
@Maximumbeans, Indeed. I've been working on getting this Infecutus chip to work on my PS2. But after soldering, I realised that a plastic piece was missing from the power ribbon cable to the power and eject buttons. -
@
SylverReZ:
Now I could go with soldering the contacts from the cable to the connector on the mobo, but doesn't sound like a good permanent solution.
-
@
Maximumbeans:
Man, that's beyond my brain I'm no good with hardware for now. I'd like to get into hardmods in future though -
@
SylverReZ:
@Maximumbeans, Maybe start practice soldering. Get a cheap-ass soldering iron and follow some good YouTube tutorials.+1
-
@
SylverReZ:
Least my experience has gotten better than over a decade ago. My iron would constantly bump into components and break them.
-
@
Maximumbeans:
Sounds good. I actually did soldering but like 16 years ago for school so uuuuh probably rusty haha
-
@
SylverReZ:
@Maximumbeans, Same here. I did soldering at school from a teacher who I honestly liked since he had plenty of good electronics experience.+1
-
-
-
-
-
@
SylverReZ:
It was like all clear and fancy. Tbf I'm not too experienced with chess, but would like to learn someday.
-
-
-
-
-
-
-
-
-
-
-