Hacking Sx Core and Sx Lite , test Units Received

linuxares · Sep 29, 2020

PiracyForTheMasses said:
Installers need to stop advertising on gbatemp. Nintendo have been getting moderators to delete peoples comments. Also, multiple people have already gotten cease and desist letters. I would not trust gbatemp to not hand over personal info to Nintendo.

Incorrect, we haven't handed over anything. Since we're in no obligation to do it. We actually only removed comments when the actual author asked us to delete them because said company tell THEM to remove all their correspondence.

Jopa777 said:
These type of services does not constitute crime as long as you limit yourself to soldering/modifying hardware. The console is yours and you can solder whatever you want on it. Crime is to use backups of games you don't own. Nintendo is doing it's job protecting its business. The thing is that they do it threatening people but if they go to court there's nothing to rely on...

Anyway installers should also be more discret to not expose themselves and customers here and other forums. You should limit these things to other secure means that currently exist

We got a section where people need X amount of posts. They should probably on kept it in there.

p1ngpong · Sep 29, 2020

PiracyForTheMasses said:
Installers need to stop advertising on gbatemp. Nintendo have been getting moderators to delete peoples comments. Also, multiple people have already gotten cease and desist letters. I would not trust gbatemp to not hand over personal info to Nintendo.

Sounds like you should delete your account then mate, if GBAtemp is so corrupt.

weatMod · Sep 29, 2020

hartleyshc said:
C&D letters from Nintendo.

Sent from my ONEPLUS A6013 using Tapatalk

yeah OK C&D but for what though , installs but why is his account now gone from here
C&D is BS anyways totally toothless scare tactic
he could have ceased advertising installs i get it but why did he delete his account or was it deleted?
i notice some posts here "removed at request of Nintendo"
honestly i think that was a bad move, and a slippery slope i would have told them to fuck off, because now where will they stop? honestly i am sure they would like to request 90% or more threads on this site be removed , i would not have given them an inch

hartleyshc · Sep 29, 2020

weatMod said:
yeah OK C&D but for what though , installs but why is his account now gone from here
C&D is BS anyways totally toothless scare tactic
he could have ceased advertising installs i get it but why did he delete his account or was it deleted?
i notice some posts here "removed at request of Nintendo"
honestly i think that was a bad move, and a slippery slope i would have told them to fuck off, because now where will they stop? honestly i am sure they would like to request 90% or more threads on this site be removed , i would not have given them an inch

I'm sure it is. But are you going to give him the money to actually fight it when they sue him?

He's putting the firmware on the chip and installing the SX OS on the Switch's. There's a reason the TX website isn't allowed to be linked here. It contains copyrighted Nintendo software/keys.

If he was able to install the chip and that's it, and made the end user do everything software wise, then he might have a leg to stand on. But again, you need funds to fight a lawsuit. Even if you are in the right.

You're free to start your own install service and fight Nintendo if you want.

Sent from my ONEPLUS A6013 using Tapatalk

weatMod · Sep 29, 2020

hartleyshc said:
I'm sure it is. But are you going to give him the money to actually fight it when they sue him?

He's putting the firmware on the chip and installing the SX OS on the Switch's. There's a reason the TX website isn't allowed to be linked here. It contains copyrighted Nintendo software/keys.

If he was able to install the chip and that's it, and made the end user do everything software wise, then he might have a leg to stand on. But again, you need funds to fight a lawsuit. Even if you are in the right.

You're free to start your own install service and fight Nintendo if you want.

Sent from my ONEPLUS A6013 using Tapatalk

nah i don't have that talent and would not want to be liable for breaking consoles/chips
all i am saying is was there really a need for his account to be deleted and for him to disappear from here?
why couldn't he just have stopped advertising his services , seems a bit extreme to go into hiding over a BS C&D

but yeah he was selling the chips too essentially i provided my own but i did see that he was offering instal packages with the chip included

Hayato213 · Sep 29, 2020

weatMod said:
nah i don't have that talent and would not want to be liable for breaking consoles/chips
all i am saying is was there really a need for his account to be deleted and for him to disappear from here?
why couldn't he just have stopped advertising his services , seems a bit extreme to go into hiding over a BS C&D

Well if he doesn't stop following the cease and desist, he get a lawsuit.

weatMod · Sep 29, 2020

Hayato213 said:
Well if he doesn't stop following the cease and desist, he get a lawsuit.

i know but wasn't the C&D to just stop doing installs ,not sure why his account needed to be deleted
seems a bit extreme

Hayato213 · Sep 29, 2020

weatMod said:
i know but wasn't the C&D to just stop doing installs ,not sure why his account needed to be deleted

He deleted the account, not Gbatemp closed his account, that is his choice we got to respect him for that. True that Squee666 also got a cease and desist but he didn't close his account.

hartleyshc · Sep 29, 2020

weatMod said:
nah i don't have that talent and would not want to be liable for breaking consoles/chips
all i am saying is was there really a need for his account to be deleted and for him to disappear from here?
why couldn't he just have stopped advertising his services , seems a bit extreme to go into hiding over a BS C&D

Maybe he no longer wanted to give support to people sending him messages about chips/installs.

The best way to just be done with everything is to just delete your account.

Sent from my ONEPLUS A6013 using Tapatalk

pausuri · Sep 29, 2020

weatMod said:
i know but wasn't the C&D to just stop doing installs ,not sure why his account needed to be deleted

I'd say its better not to speculate and let's stick to the fact that's he's not around that's bc an important reason...

izy · Sep 30, 2020

I could have easily deleted my account but fuck that its 10 years old.

I requested my posts deleted because it was easier than editing that content
I even requested any vouches for my repairs etc removed because even if the site they used for reference was another i may as well remove traces they could use.

But yeah the most i can do now is repair switches and replace sp1 and sp2 smds that people have damaged.

I can do console mods in the sense that If I was sent a switch/switch lite

I could solder the flex cables / nand flex and replace the thermal.

But physically installing the chip itself i cannot you would have to attach that yourself to the flex and screw the console together.
Same for the switch lite chip you would have to solder the last 2 points which is easy.

Obviously I would charge less. Like £35 + postage costs for this kind of job since all I'm doing is soldering a flex that a user sends me.
And prob the going rate if it was a repair to sp1/sp2 ontop

This would be doable as I would have no involvement in actual tpm bypasses as I had not touched said device and the software required to setup it isn't involved with me.

Maybe if atmosphere actually did a release for sxcore/lite. I would go back doing full at the normal rate installs as it doesn't really violate anything

But yeah C and D is a bummer. I never even sold chips but rather not take the risk doing full installs only repairs and the afore-mentioned

LiveMChief · Sep 30, 2020

squee666 said:
I could have easily deleted my account but fuck that its 10 years old.

I requested my posts deleted because it was easier than editing that content
I even requested any vouches for my repairs etc removed because even if the site they used for reference was another i may as well remove traces they could use.

But yeah the most i can do now is repair switches and replace sp1 and sp2 smds that people have damaged.

I can do console mods in the sense that If I was sent a switch/switch lite

I could solder the flex cables / nand flex and replace the thermal.

But physically installing the chip itself i cannot you would have to attach that yourself to the flex and screw the console together.
Same for the switch lite chip you would have to solder the last 2 points which is easy.

Obviously I would charge less. Like £35 + postage costs for this kind of job since all I'm doing is soldering a flex that a user sends me.
And prob the going rate if it was a repair to sp1/sp2 ontop

This would be doable as I would have no involvement in actual tpm bypasses as I had not touched said device and the software required to setup it isn't involved with me.

Maybe if atmosphere actually did a release for sxcore/lite. I would go back doing full at the normal rate installs as it doesn't really violate anything

But yeah C and D is a bummer. I never even sold chips but rather not take the risk doing full installs only repairs and the afore-mentioned

Glad you stayed

I actually need my switch repaired, got a bad install with a trinket from someone and a non working left joycon rail. Would you be able to help with this?

matias3ds · Sep 30, 2020

theres an tiny soldering installers recommendation on xecuter site with an upcoming southamerica and brazil installers coming soon , that has been removed .

izy · Sep 30, 2020

LiveMChief said:
Glad you stayed

I actually need my switch repaired, got a bad install with a trinket from someone and a non working left joycon rail. Would you be able to help with this?

Well I can't even help you lol as i can only cover eu/uk

LiveMChief · Sep 30, 2020

squee666 said:
Well I can't even help you lol as i can only cover eu/uk

RIP

Meatloaf916 · Sep 30, 2020

Modchips are easy, usb ports are much harder in my opinion

pausuri · Sep 30, 2020

Meatloaf916 said:
Modchips are easy, usb ports are much harder in my opinion

Well, I would say that depends in how skilled you are, if you have the right tools and knowledge

Meatloaf916 · Oct 1, 2020

pausuri said:
Well, I would say that depends in how skilled you are, if you have the right tools and knowledge

I mean i've done both. I'm just saying not being able to see pins versus being able to see everything you solder makes it harder. or at least more annoying. Then you have to see if it is the power chip or usb port, so there is more troubleshooting involved. I wouldn't say either are tremendously hard, I was just saying that most people can probably learn how to do the chip themselves with relatively inexpensive equipment. Where with a usb port you need a hot air rework station. your comment is like saying a pizza is as easy to make as a pb and j you just need more ingredients and an oven.

sslmm · Oct 1, 2020

Hi there. Could someone DM me any good sx lite core that ships to portugal ?
And how is the price nowadays? Last time i checked it was about 45 $

Thanks

Artur95 · Oct 1, 2020

Jopa777 said:
Have less than 5 posts so can't send pm. Please send by pm and would be able to reply with link to the seller I bought to. Arrived to EU in one week, no customs. Installed and worked. Advise you to buy a digital microscope, flux, good quality soder (0,5 mm) and mx4 thermal paste. It was a 2h30 job for me and must be done with calm. You can follow modzvilleusa guide on youtube

Sorry for late reply, but i was able to find someone trusted on Aliexpress and bought it from him, thank you anways!

Hacking Sx Core and Sx Lite , test Units Received

The inadequate, autocratic beast!

Gamer Professional Deluxe

Well-Known Member

Well-Known Member

Well-Known Member

Newcomer

Well-Known Member

Newcomer

Well-Known Member

Well-Known Member

Advanced Tech Pleb

Well-Known Member

Well-Known Member

Advanced Tech Pleb

Well-Known Member

Active Member

Well-Known Member

Active Member

Member

Member

Similar threads

Popular threads in this forum