Hardware Switch charging one side 15v other 5v 0amps

note9 · Sep 13, 2020

Have a Switch that was charging at 5v 0amps both sides of the cable, i replaced the M92T36 and and USB port was soldered back on as the previous owner just held it down with the screws. now it charges on one side at 15v with normal charging Amps, flipping the cable i get 5v 0.00Amps.

also when connected to charger the D+ and D- become shorted together, when i remove the cable theres no more short. B5/CC2 also shorts with VBUS.

anyone have any clues?

thanks

Avinitlarge · Sep 17, 2020

Check the 7C/DUG protection diode on the underside of the motherboard. I had one doing this and the diode had failed. If you look back through my posts, you should find a picture

note9 · Sep 20, 2020

i actually removed both and got 15v charging on both sides. is it necessary to replace them? ive seen some images of boards with those two cips missing.

Avinitlarge · Sep 23, 2020

I didn’t replace it as I didn’t have a spare one

Avinitlarge · Sep 26, 2020

note9 said:
i actually removed both and got 15v charging on both sides. is it necessary to replace them? ive seen some images of boards with those two cips missing.

Had this one in today, looks like some models don’t have either fitted.

Hardware Switch charging one side 15v other 5v 0amps

Member

Active Member

Member

Active Member

Active Member

Attachments

Similar threads

Popular threads in this forum