prodinfo must be the one that you already got before you booting incognito and if you have restored your original firmware just go to setting and check the switch serial number
Hi
. I got someone to help me. Turns out, I didn’t have updated version of NXmanger. After that, it worked like a charm
is there a way to extract the prodinfo.bin from an older nand backup for restore with Incognito_RCM? I have a console here that has no identity, but I have an older backup of a bricked nand of this console. Maybe there is still a prodinfo there that could be used to restore the identity. I have made the console executable again via bypass downgrade, but had to find out that it has no identity.
This just made me think if new identities could be generated for "banned users"
Probably not.
Thank god for incognito.
Hello I have the same problem I have lost the prod info file that I have made in incognito but I have the prodinfo file 32kb from atmosphere. I tried to restore it with nxnandmanager but I always get an error not a valid Nx storage. Can someone help me please
I think my prodinfo.bin is corrupt I have restore it from my formatted usb. is there a way to repair it and then restore it again?
I also have found another prodinfo.bin and when I try to restore it I got the error trying to restore decrypted content to encrypted content. Is there away to encrypt the file?
I also have found another prodinfo.bin and when I try to restore it I got the error trying to restore decrypted content to encrypted content. Is there away to encrypt the file?
Last edited by asadi300,
If you don't have a valid PRODINFO dump, then your console is now effectively banned. Next time, use 90DNS instead of Incognito as it is much safer and accomplishes the same goal.
D
Deleted User
Guest
I’m in the proccess of creating a prodifo.bin from the stored cal0.bin Dumped from the hekate 5.3.2 payload under console info then dumped which shows the xaw00000000 serial nbr and editing it with a binary editor on windows and then save the file and rename prodinfo.bin and restore with NxNandManager I’ve literally been at this a month no biskeys wiped out, no backup nothing all from scratch but got the biskeys back and everything it’s lengthy I have so many bookmarks but hopefully This will work I believe it should in theory
D
Deleted User
Guest
Update....Sorry about multiple msgs signing up gave me errors and threw multiple responses I apologize but this is big!... no major editing was needed convert the cal.bin file to cal.txt and pull up in notepad on left side as shown edit the 000000000 to the serial nbr on your switch and save and convert back to .bin file and flash with NxNandManager For prodinfo. Not bad for a noob
Attachments
Last edited by ,
Uh, dunno if you're aware, but just restoring the serial number won't do anything, it's not really used for anything.
Heh not sure if that idiot user deleted his account just because he was proven wrong but its even funnier that GBATemp still shows his username as long as someone quoted his post before his account was deleted
I would like to thank you for this. I accidentally trashed my prodinfo with my boot0 and 1 and raw.bin. I was lucky mine had my serial number instead of the 0000000. I followed this and got got it back. In atmosphere it shows all 000000 and in stock it shows original serial. thanks 1000
Last edited by b00f0087,
I need help restoring my automatic backup as well, do you have a discord I can use to ask for help?
I get an error that Incognito_RCM needs to be updated or something about new firmware... It's version 0.6.1 and I'm on 11.0.1. Should be up to date. My two files are "XAW1005742XXXX_PRODINFO.bin" and "XAW1005742XXXX_BISKEYS" from my atmosphere backup folder. I am having the same issue of my system serial reading XAW000000... and can't seem to get a restore to work.
Just rename the file but next time, you should use something less dangerous such as 90DNS or dns.mitm
Sorry to bring up an old dead thread. However, I too was looking into this and I was referred to the best solution on Discord and wanted to state it here for anyone finding via Google:
1. Install TegraExplorer.
2. Put your prodinfo.bin file (about 4 MB size) as exactly `prodinfo.bin` on the root of your SD card.
3. Download this te script and place it on the root of your SD card.
4. Open TegraExplorer through Hekate or Directly
5. Select Browse SD, then the Script file, then Launch Script.
6. Select where you want to restore it, and which file (the file on root of SD).
You also have the choice to restore the automatic atmosphere backup, however, be careful with that and verify its actually the right one you want as the auto backup is likely the 000000'd one.
If you don't have a PRODINFO.bin file, but have a NAND backup that likely has a valid prodinfo, then run BisKeyDumper, Run HacDiskMount and open your rawnand.bin with it, then select the PRODINFO, enter your BIS Key data as it asks, and click backup. You now have the bin file!
1. Install TegraExplorer.
2. Put your prodinfo.bin file (about 4 MB size) as exactly `prodinfo.bin` on the root of your SD card.
3. Download this te script and place it on the root of your SD card.
4. Open TegraExplorer through Hekate or Directly
5. Select Browse SD, then the Script file, then Launch Script.
6. Select where you want to restore it, and which file (the file on root of SD).
You also have the choice to restore the automatic atmosphere backup, however, be careful with that and verify its actually the right one you want as the auto backup is likely the 000000'd one.
If you don't have a PRODINFO.bin file, but have a NAND backup that likely has a valid prodinfo, then run BisKeyDumper, Run HacDiskMount and open your rawnand.bin with it, then select the PRODINFO, enter your BIS Key data as it asks, and click backup. You now have the bin file!
Could someone tell me if it has a fix or salvation? That's how they gave it to me, but I don't know if it says Xaw by default, because mine says xkw below, and from what I see my PRODINFO. bin is less than 4 MB
Attachments
Last edited by Chonay,
Looks like an AMS autobackup
Sadly it's made from a sysNAND that has wiped PRODINFO partition...
Similar threads
-
@
SylverReZ:
Had a ton of bugs and often crashed. It even didn't support DOS compatibility with older games. :feelsbadman: -
-
@
RedColoredStars:
I downloaded XP on dialup when it came out. Overnights for like a week. cuz I couldn't tie up the phone line during the day. It was so awesome and worked so great going from ME to XP. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I'm beefing with a neighbor currently each time I ask him for help with something he makes bs excuses then ignores my calls text but seems to randomly speak when I'm done with the project after doing things to help him -
@
RedColoredStars:
DiGiorno Crispy Pan Pizza tasted pretty dang close to Pizza hut pan pizza, but Im not sure if theyve been discontinued or not. Havent seen them locally for a couple of months now.
-
