Did you plug the nand chip on the modchip and not on to the motherboard? I also heard that people plugged the nand chip on to the motherboard and the Switch doesnt power on without giving any leds on sx core. A overall picture would be nice
Last edited by Grimlock97,
are you sure you stick the chip in the right direction. v1 and v2 diffrent side i know
yes but it wont turn on even with the chip attached
--------------------- MERGED ---------------------------
now tried to attact the nand back to the motherboard but nothing still wont turn on.
--------------------- MERGED ---------------------------
yes
On the second picture, you already plugged the nand chip , where it belongs to but you must take the silver alu-shielding off. You can shortcut the modchip or maybe because of the alu-shielding, the nand chip does not connect properly.
ok will try that.but is it normal that the switch not turning on without the chip attached
It may be normal, I did not test it with mine but if you want to check your soldered connections, use multimeter and test the connectivity on both solder points.
If he means without the nand, thats absolutly normal but if he means that he did not attach the modchip, I have to let this unanswered as I did not test that.
this is as good as i could manage
--------------------- MERGED ---------------------------
with nand attached to the chip
There is the problem, you did not connect the first connector, near the cable where it says "up" to the motherboard. From the image I can see it is not connected
image
I marked it on the picture with a red marker, there is the second connector on the modchip, that you have to plug it on to the motherboard. then it should work
image
I marked it on the picture with a red marker, there is the second connector on the modchip, that you have to plug it on to the motherboard. then it should work
Last edited by Grimlock97,
Received and installed mine, i am a completely IGNORANT when it comes to soldering, just used a bit of common sense and lots of patience.... did it in an afternoon, the only thing i dont like is that this wont let me reboot or boot any other payload, lets say Lockpick and Incognito RCM, i cant use either because i get a black screen... everything else works. Even Tesla menu.
Jesus..Your right now i got blue light what does mean and do i have to turn on the switch to test.There is the problem, you did not connect the first connector, near the cable where it says "up" to the motherboard
image
I marked it on the picture with a red marker, on the motherboard there is the second connector on the modchip, that you have to plug it on to the motherboard. then it should work
