Hacking Sx Core and Sx Lite , test Units Received

XD2020 · Jun 20, 2020

WierdBob said:
Just tried on my switch (bought last month).
I had to use a PH0 instead of PH00 on the top screw as I was starting to damage the head with the smallest screwdriver tip but I managed to unscrew it. the other phillips screw came without too much effort.
I only had a PY0 for the triwings and it worked too (a little hard since this tip almost too big for the hole).

Now I just have to receive my modchip (bought june 11 on elewelt, shipped with yanwen express to france, still in transit)

The screwdrivers we’re supposed to use is ph00 and y00 right? (can’t check right now) So would you say use the recommended sizes and if it seems iffy go a size bigger?

Redasx · Jun 20, 2020

Please which soldering pin should I use..while installing the SX Core

I have joined a picture please
Thanks

Nerdtendo · Jun 20, 2020

Redasx said:
Please which soldering pin should I use..while installing the SX Core View attachment 214201
I have joined a picture please
Thanks

Thinnest is best. It's a small solder pad and the tip wont run as hot.

WackyRaces · Jun 20, 2020

Personally, I’ve had the best experiences with tips 3 and 4. Get the pads pre fluxed, and with the tips straight edge, hold it against the component and feed the solder in. Pointy edges don’t tend to hold heat in my opinion as the straight edges. Besides, you can rest the straight edge against the component whilst you fumble with the solder lol!

Astur_torque · Jun 21, 2020

squee666 said:
done my nand backup made an emunand, now i need some hombrew and payloads

Once you have done your NAND backup, where do you start from?

izy · Jun 21, 2020

Astur_torque said:
Once you have done your NAND backup, where do you start from?

Backup SD
Create Emunand, the easiest way i found to do this wasnt to make an emunand in the bootloader.
On the sd create a folder called "sxos" and inside it create a folder called "emunand"
copy your nand backup to it (this makes it easier to transfer nands backup reinstall etc)

then thats it any homebrew you install like normal.
sysmodules go in sxos/titles

you still need to hold power+vol up to access the bootmenu as it will boot emu by default now

also payloads dont work they need to be coded to work

Theroid · Jun 21, 2020

guys make sure to use fat32 instead of exfat. My sd card (exfat) just got coruppted in one day, because sxinstaller froze. (gave me errors afterwards in sxinstaller)

aymlam · Jun 21, 2020

Does anyone know of anyone that installs these in Europe? Really don't feel like sending my switch all the way to the US.

lvlonkii · Jun 21, 2020

XD2020 said:
I can pm you a link.

Can you pm me a link also?

Astur_torque · Jun 21, 2020

aymlam said:
Does anyone know of anyone that installs these in Europe? Really don't feel like sending my switch all the way to the US.

I'm pretty sure you're gonna find thousands of People in the Iberian Peninsula that can do this

--------------------- MERGED ---------------------------

squee666 said:
Backup SD
Create Emunand, the easiest way i found to do this wasnt to make an emunand in the bootloader.
On the sd create a folder called "sxos" and inside it create a folder called "emunand"
copy your nand backup to it (this makes it easier to transfer nands backup reinstall etc)

then thats it any homebrew you install like normal.
sysmodules go in sxos/titles

you still need to hold power+vol up to access the bootmenu as it will boot emu by default now

also payloads dont work they need to be coded to work

So.. what kind of things I can do know.. play games?

Hongtm77 · Jun 21, 2020

Have anyone gotten the reward for translating the CORE and LITE manuals yet? Or the tracking numbers?

izy · Jun 21, 2020

So.. what kind of things I can do know.. play games?

yeah playing games and homebrew works fine,nx themes works fine for what i used , tesla loaded sys info overlay module.
games loaded fine, copied saves etc

Dont delete serial in tinfoil or emunand wont boot

Bladexdsl · Jun 21, 2020

Astur_torque said:
I'm pretty sure you're gonna find thousands of People in the Iberian Peninsula that can do this

if they haven't been sent a C&D yet

josho53 · Jun 21, 2020

How long does it take for PayPal requests to come through?

I’ve tried ordering on Tx and sxflash last week sometime and sent them both emails but still waiting on a reply

Also strange that credit/debit card wasn’t on the options for me only PayPal request?

izy · Jun 21, 2020

josho53 said:
How long does it take for PayPal requests to come through?

I’ve tried ordering on Tx and sxflash last week sometime and sent them both emails but still waiting on a reply

Also strange that credit/debit card wasn’t on the options for me only PayPal request?

i used their support contact through facebook/website for mine at least

LilShah · Jun 21, 2020

Hongtm77 said:
Have anyone gotten the reward for translating the CORE and LITE manuals yet? Or the tracking numbers?

I'm still waiting for mine. I contacted them asking for an ETA, but nothing as of yet. I'm guessing they'll send after the Lite releases.

Alenko · Jun 21, 2020

Today I tried to order sx core from elewelt, but there is a problem because paypal doesn't allow payments for sx core i have to send them an email for there company paypal so i can transfer the money. Is it trustworty? Sorry for my english

Deleted User · Jun 21, 2020

Alenko said:
Today I tried to order sx core from elewelt, but there is a problem because paypal doesn't allow payments for sx core i have to send them an email for there company paypal so i can transfer the money. Is it trustworty? Sorry for my english

Aliexpress has plenty of Core in stock and are the most affordable - Just placed an order for 5 Cores with fast shipping came out to $270 total - Less than $55 each Core isn't to bad.

Placed order a few days ago and have been tracking order as it moves.

Decided to go this route as many customers have their Cores in hand from Ali.

They take paypal and CC.

shinwg · Jun 21, 2020

Anyone in US have the chip for customer already for mariko switch please let me know

--------------------- MERGED ---------------------------

ModderFokker619 said:
Aliexpress has plenty of Core in stock and are the most affordable - Just placed an order for 5 Cores with fast shipping came out to $270 total - Less than $55 each Core isn't to bad.

Placed order a few days ago and have been tracking order as it moves.

Decided to go this route as many customers have their Cores in hand from Ali.

They take paypal and CC.

Do you also install for customer?

Deleted User · Jun 21, 2020

shinwg said:
Anyone in US have the chip for customer already for mariko switch please let me know

--------------------- MERGED ---------------------------

Do you also install for customer?

Yeah I offer installs

https://gbatemp.net/threads/nintend...tx-sx-core-lite-trinket-m0-usa-canada.544860/

Hacking Sx Core and Sx Lite , test Units Received

Well-Known Member

Active Member

Your friendly neighborhood idiot

New Member

Well-Known Member

Advanced Tech Pleb

Member

New Member

New Member

Well-Known Member

Well-Known Member

Advanced Tech Pleb

fanboys triggered 9k+

New Member

Advanced Tech Pleb

Member

Member

Deleted User

Guest

Well-Known Member

Deleted User

Guest

Similar threads

Popular threads in this forum