Hacking Sx Core and Sx Lite , test Units Received

Redasx

Active Member
Newcomer
Joined
Jun 19, 2020
Messages
38
Trophies
0
Age
49
XP
122
Country
United States
boots first try
had an issue where the solder bridged the smd due to overflow, managed to clean it
and the right smd is really close to the pad on the wrong side so it adhered to it first, seperaed them both and its fine
doing a nand backup as we speek

hook me up guys with links and stuff to the good stuff ;)
i havnt had a hacked switch now i do
Congratulations.....how was the soldering process please.....and thanks again
 

izy

Advanced Tech Pleb
Member
Joined
Sep 17, 2010
Messages
2,311
Trophies
2
XP
4,000
Country
United Kingdom
soldering was easy enough 0.6 mm solder could really have been smaller i got frosted joints but my tip isnt the cleanest and i had overflow

didnt realise how long a nand dump would take so waiting all year to reassemble
 
Last edited by izy,

mk0155

Member
Newcomer
Joined
Jun 19, 2020
Messages
13
Trophies
0
Age
27
XP
54
Country
Bahamas, The
Why faith? there's an insurance in case anything bad happens.. I wouldn't order to a new shop if it's not though paypal, especilly paying more than 20 euros
https://www.paypal.com/uk/webapps/mpp/ua/acceptableuse-full

Paypal doesn't allow the sale of modchips as they come under, "items that infringe or violate any copyright, trademark"

The paypal account TXswitch are using is something like "[email protected]". In order to disguise the transaction from Paypal you are instructed to 'not leave any information about products and website after Paypal payment'.

The paypal account they are using is probably disposable.

Trying to getting money back from Paypal when you've bought a banned item, deliberately obscured the nature of the transaction and colluded with the seller in doing so is not going to work.
 

Redasx

Active Member
Newcomer
Joined
Jun 19, 2020
Messages
38
Trophies
0
Age
49
XP
122
Country
United States
soldering was easy enough 0.6 mm solder could really have been smaller i got frosted joints but my tip isnt the cleanest and i had overflow

didnt realise how long a nand dump would take so waiting all year to reassemble[/QUOTE thanks...I heard that dump the nand you need two to three hours...be patient my friend...you did the most important thing....SOLDERING...
 

izy

Advanced Tech Pleb
Member
Joined
Sep 17, 2010
Messages
2,311
Trophies
2
XP
4,000
Country
United Kingdom
I also used txswitch they cant use paypal through normal means for obvious reasons. I had to pay to a @123.com email which is china specific.

Other sites like mod3ds are unable to accept anything other than Mastercard and then they ramped price up to stop buyers.


Out shopping 50% into my dump when left.
 
Last edited by izy,

Juniper

Member
Newcomer
Joined
Jun 17, 2020
Messages
8
Trophies
0
Age
44
XP
48
Country
United Kingdom
I had the exact same problem. For me the Phillips were even more pain in the a** than the triwings.
I ended up with drilling a hole in the head of 2 screws and even than I had a hard time to remove The case because the rest of the screw still blocked it.

It was a completely new switch and it now already looks scetchy with scratches and missing screws from the outside...

At least I managed to install the chip without any problems.

These screws really are ridiculous

I have 2 phillips adjacent to the charger, 2 phillips on the joycon rails and one bottom right tri wing to remove. All are impossible to remove. I guess i have to invest in a drill to have any chance of removing the backplate -_-

i just feel like ripping it off
 

izy

Advanced Tech Pleb
Member
Joined
Sep 17, 2010
Messages
2,311
Trophies
2
XP
4,000
Country
United Kingdom
i had no problem removing them, i used the screwdrivers i got for when i replaced joycon shells and a small amount of pressure worked fine.

my triwing from 2008 worked better tho even though its way larger
 

shinwg

Well-Known Member
Member
Joined
Jul 1, 2016
Messages
531
Trophies
0
Age
41
XP
715
Country
United States
I cant do it my self I am looking for a professional to do a full service for me please contact with price In usa
i need you to already have the chip and install for me
 

Juniper

Member
Newcomer
Joined
Jun 17, 2020
Messages
8
Trophies
0
Age
44
XP
48
Country
United Kingdom
i had no problem removing them, i used the screwdrivers i got for when i replaced joycon shells and a small amount of pressure worked fine.

my triwing from 2008 worked better tho even though its way larger

perhaps you’re one of the lucky ones with a switch that was manufactured with the screws not so tightly in place

just done a quick google and i see that so many people have the problem of stripped screws on their switch

mine we so tight, when twisting, the screwdriver just kept digging into the screws and they simply wouldnt turn, which eventually wore them away and stripped em
 

Nerdtendo

Your friendly neighborhood idiot
Member
Joined
Sep 29, 2016
Messages
1,762
Trophies
1
XP
4,593
Country
United States
I cant do it my self I am looking for a professional to do a full service for me please contact with price In usa
i need you to already have the chip and install for me
No one is going to "already have the chip". you'll have to order yourself or give them some time to get one shipped in... that is if you can find someone willing to install in the first place.
 

P.S

Well-Known Member
Member
Joined
Apr 9, 2009
Messages
102
Trophies
0
Website
Visit site
XP
127
Country
still not got money from xecuter-sx. sent 4 emails without reply and received no confirmation that I will be refunded. I've never had to do chargeback at the bank before. anyone who did this and managed to get money back?
 

Astur_torque

Well-Known Member
Member
Joined
May 19, 2020
Messages
204
Trophies
0
Age
35
XP
248
Country
Spain
https://www.paypal.com/uk/webapps/mpp/ua/acceptableuse-full

Paypal doesn't allow the sale of modchips as they come under, "items that infringe or violate any copyright, trademark"

The paypal account TXswitch are using is something like "[email protected]". In order to disguise the transaction from Paypal you are instructed to 'not leave any information about products and website after Paypal payment'.

The paypal account they are using is probably disposable.

Trying to getting money back from Paypal when you've bought a banned item, deliberately obscured the nature of the transaction and colluded with the seller in doing so is not going to work.

Yes I know is disposable

But this is only for the seller, I'm covered even if it's fake, they will ban the account and paypal give my money back.. this is better than just a transfer

I have emails and messages than relate this account to this shop

And also this is no ilegal I just want to use this modchip to load android :D
 
Last edited by Astur_torque,

XD2020

Well-Known Member
Member
Joined
May 21, 2020
Messages
111
Trophies
0
Age
34
XP
314
Country
United States
perhaps you’re one of the lucky ones with a switch that was manufactured with the screws not so tightly in place

just done a quick google and i see that so many people have the problem of stripped screws on their switch

mine we so tight, when twisting, the screwdriver just kept digging into the screws and they simply wouldnt turn, which eventually wore them away and stripped em
How new or old is your switch? Wondering if they are tightening the screws down tighter to discourage people from getting inside. Could even be using locktite. I haven’t tried to disassemble my switch. Hope it goes ok!
 

Juniper

Member
Newcomer
Joined
Jun 17, 2020
Messages
8
Trophies
0
Age
44
XP
48
Country
United Kingdom
How new or old is your switch? Wondering if they are tightening the screws down tighter to discourage people from getting inside. Could even be using locktite. I haven’t tried to disassemble my switch. Hope it goes ok!

hmmm you might be on to something, who knows. My switch is quite new, only bought it a couple of months ago from a retailer, brand new. It’s a mariko switch

my hatred against nintendo has increased over the last few weeks. If they are indeed doing this then wow
 

WierdBob

New Member
Newbie
Joined
Jun 14, 2020
Messages
4
Trophies
0
Age
45
XP
73
Country
France
How new or old is your switch? Wondering if they are tightening the screws down tighter to discourage people from getting inside. Could even be using locktite. I haven’t tried to disassemble my switch. Hope it goes ok!
Just tried on my switch (bought last month).
I had to use a PH0 instead of PH00 on the top screw as I was starting to damage the head with the smallest screwdriver tip but I managed to unscrew it. the other phillips screw came without too much effort.
I only had a PY0 for the triwings and it worked too (a little hard since this tip almost too big for the hole).

Now I just have to receive my modchip (bought june 11 on elewelt, shipped with yanwen express to france, still in transit)
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    LeoTCK @ LeoTCK: hmm