Hacking RELEASE Vöid-NX - Another All-In-One Custom Firmware

mikifantastik98 · May 27, 2020

* /switch /.get ? ...what is this folder ?

* exosphere.ini .... in the root ?

* Sigpatch-Installer are out of date
what kind of patch are you using for this package ???

My package :
Hekate 5.2.1 + Atmosphere 0.12.0 + latestHarukoNX

Top Homebrews

Awoo-Installer ( best Installer ever ! )
KOSMOS Toolbox
Homebrew Appstore
ChoidujourNX
EdiZon v3.1.0 - Nightly
N-Xplorer
ftpd snap!
sys-clk-Editor
ldn_mitm
pplay
NX Themes Installer
amiigo
NXdumptool
Gamecard Installer NX
switch cheats updater

Top Overlays

EdiZon Overlay
emuiibo overlay
sys-clk-Overlay
FastCFWswitch
TextReaderOverlay-NX
Status Monitor
ovlShareNX
ovl-tune ( sys-tune )

Top sysmodules

sys-con
sys-clk
sys-ftpd-light
emuiibo
ldn_mitm
sys-tune

I hope it will be improved in the future !

Synecdoche · May 27, 2020

tend57 said:
Sorry if this is a stupid question, but now that you included the sigpatch installer, are the sigpatches still installed by default or are we supposed to run the sigpatch installer?

By default, the sigpatch installer is there to make it easier to update yourself if needed

mikifantastik98 said:
* /switch /.get ? ...what is this folder ?

* exosphere.ini .... in the root ?

* Sigpatch-Installer are out of date
what kind of patch are you using for this package ???

My package :
Hekate 5.2.1 + Atmosphere 0.12.0 + latestHarukoNX

Top Homebrews

Awoo-Installer ( best Installer ever ! )
KOSMOS Toolbox
Homebrew Appstore
ChoidujourNX
EdiZon v3.1.0 - Nightly
N-Xplorer
ftpd snap!
sys-clk-Editor
ldn_mitm
pplay
NX Themes Installer
amiigo
NXdumptool
Gamecard Installer NX
switch cheats updater

Top Overlays

EdiZon Overlay
emuiibo overlay
sys-clk-Overlay
FastCFWswitch
TextReaderOverlay-NX
Status Monitor
ovlShareNX
ovl-tune ( sys-tune )

Top sysmodules

sys-con
sys-clk
sys-ftpd-light
emuiibo
ldn_mitm
sys-tune

I hope it will be improved in the future !

.get is for homebrew Appstore

Exosphere goes in root

I wasn't aware sigpatch installer is out of date, I grabbed the latest (I believe)

Regardless, thank you for this, I can't improve if nothing is said or critism isn't made. After all this was for fun, not meant to get attention haha

mikifantastik98 · May 27, 2020

Synecdoche said:
I wasn't aware sigpatch installer is out of date, I grabbed the latest (I believe)

HarukoNX says:
Download Sigpatch Installer Needs to be updated.
https://gbatemp.net/threads/latest-fs-and-acid-patches-for-kosmos.562915/

you have to download the latest version manually...
FS and ACID Patches:
ES Patches:

Synecdoche · May 27, 2020

mikifantastik98 said:
HarukoNX says:
Download Sigpatch Installer Needs to be updated.
https://gbatemp.net/threads/latest-fs-and-acid-patches-for-kosmos.562915/

you have to download the latest version manually...
FS and ACID Patches:
ES Patches:

Far point, my bad.
Regardless I'll be keeping them up to date.

Thanks again

bluedart · Jun 2, 2020

What's the latest firmware this works with? I'm looking to upgrade from Kosmos on 9.2.0 and I'll be needing sigpatches. Things seem to require 10.0.2 now.

C7XL · Jun 3, 2020

bluedart said:
What's the latest firmware this works with? I'm looking to upgrade from Kosmos on 9.2.0 and I'll be needing sigpatches. Things seem to require 10.0.2 now.

This should be for 10.0.3, if I'm not mistaken.

blinky87 · Jun 7, 2020

Hi, I put 2.2.1 on my sd card, but now the serial info shows in cfw. Previously I was using Kosmos and had used incognito 6.2 to hide the serial infos in cfw.

I reran incognito 6.2 on the emummc but it didn't work to hide the serial info.

Is there some way to get get it to work? Do I need to update emummc to the newest fw and try again? It is on 10.0.0 currently.

808lordz · Jun 7, 2020

I have been using VoidNX and it works great so far.

Only things I did was to remove doubled folders inside the switch folder (there was 2 Gold Leafs, 2 Game-Card Installers, 2 Awoo Installers, etc) and Ive also added the FS & ACID patches. Thats all

Works great!

Synecdoche · Jun 7, 2020

blinky87 said:
Hi, I put 2.2.1 on my sd card, but now the serial info shows in cfw. Previously I was using Kosmos and had used incognito 6.2 to hide the serial infos in cfw.

I reran incognito 6.2 on the emummc but it didn't work to hide the serial info.

Is there some way to get get it to work? Do I need to update emummc to the newest fw and try again? It is on 10.0.0 currently.

Is the exosphere.ini in the root of the sd card? Also it's only enabled for emuNAND, you were looking there right? If it doesn't work let me know and I'll double check one I get back to my pc.

808lordz said:
I have been using VoidNX and it works great so far.

Only things I did was to remove doubled folders inside the switch folder (there was 2 Gold Leafs, 2 Game-Card Installers, 2 Awoo Installers, etc) and Ive also added the FS & ACID patches. Thats all

Works great!

Hey thanks for letting me know, apparently I'm very bad at packaging Void and keep missing these stupid little things haha.

I'll have a proper look when I'm back at my pc and not rushing out shitty releases in-between bouts of spare time.

Any other issues please let me know by either messaging me or even better, on Discord.

Also apologies for going slow on this, when Neptune came out I kinda just gave up, but thought screw it, why stop my own fun because some one else is having fun.

Synecdoche · Jun 8, 2020

So I've been a way a while due to IRL work and messing about, pretty much downtime on this project because to be honest I didn't think anyone would care, especially with Neptune now out. I thought who would use this when there's something better?

But then I remembered there is a few small people who use this and who am I to say fuck it, even if one person uses this, I'll keep it up.

Do bare with me, I'll be updating Vöid in the coming days with the following:

- A better boot logo
- Fusee chain loading so HBG should work by default (it will not come with this package however) and for people who really hate the current boot method
- A few more homebrew apps
- All current Homebrew apps updated to the latest
- Working (hopefully) Homebrew Appstore that shows what is currently installed
- Another clean up because I'm useless at packaging apparently
- An optional Lite version for people who don't want PC applications etc

Thank you for the one or two who use this, and more importantly thank you for the kind words and gentle nudges I've gotten.

jczoe · Jun 8, 2020

ty for having a complete package. I appreciate it.

blinky87 · Jun 8, 2020

Thanks I like this better than Neptune!

--------------------- MERGED ---------------------------

Synecdoche said:
Is the exosphere.ini in the root of the sd card? Also it's only enabled for emuNAND, you were looking there right? If it doesn't work let me know and I'll double check one I get back to my pc.

Hi, yes exosphere.ini is in the root. Only enabled for emuNAND? What do you mean? I booted into cfw emunand from hekate and checked the serial info from settings. Is that what you mean? I still see the serial infos there.

808lordz · Jun 8, 2020

This is way better than Neptune. Thanks.

Synecdoche · Jun 8, 2020

Void 3.0 is out now.

It's a decent update, but the biggest change is it now uses Fusee Primary by chainloading through Hekate, so HGB Shop SHOULD work, however, I cannot test it at this time as the website is down and I can't find a download to test it, so please let me know if it works or not.

All changes are tested and are working on a fresh SD Card and clean NAND this time. Except for HGB Shop.

I can confirm the following works:

Atmosphere Incognito correctly removes your serial. You can check this in settings > system > serials and you should get [Three Letters]00000000 in your serial section.
Homebrew Appstore does correctly show you what is installed now.
Hekate loads Atmosphere correctly.
There are no more duplicates.
Installing and running games do work.
All Homebrew are up to date (Let me know if I missed one)

Changes:

All Homebrew apps updated
Added the following:
- VGEdit
- Emuiibo
- Amiigo
- NX Theme Injecter
- Status Monitor Overlay
- SYS Tune Overlay
Updated Bootlogo, however, due to chainloading it doesn't work at the moment but added it anyway. But it looks nicer regardless.
Added a Vöid Lite, which does not include the Payloads and PC Tools
HB Appstore cache update and shows what you have installed.
General clean up, so with a fresh install of Vöid you will no longer get multiple of the same versions of Homebrew Apps.

NOT TESTED

Hekate now boots by chainloading Fusee Primary, so HGB Shop should work, please let me know if this isn't the case as the website is down and I couldn't test it.

Again, thank you for everyone who actually uses this, it's blown my mind even one person uses it to be honest. As I've said previously, I understand if you'd rather use something else, this is just for fun and the set up I use and I'm here to make everything noob friendly, but, if anything doesn't work, you'd like anything changed, or you'd like a general chat, please let me know here, in my DMs or on Discord.

layzMich3l · Jun 8, 2020

Synecdoche said:
Void 3.0 is out now.

It's a decent update, but the biggest change is it now uses Fusee Primary by chainloading through Hekate, so HGB Shop SHOULD work, however, I cannot test it at this time as the website is down and I can't find a download to test it, so please let me know if it works or not.

All changes are tested and are working on a fresh SD Card and clean NAND this time. Except for HGB Shop.

I can confirm the following works:

Atmosphere Incognito correctly removes your serial. You can check this in settings > system > serials and you should get [Three Letters]00000000 in your serial section.

Homebrew Appstore does correctly show you what is installed now.

Hekate loads Atmosphere correctly.

There are no more duplicates.

Installing and running games do work.

All Homebrew are up to date (Let me know if I missed one)

Changes:

All Homebrew apps updated

Added the following:

VGEdit

Emuiibo

Amiigo

NX Theme Injecter

Status Monitor Overlay

SYS Tune Overlay

Updated Bootlogo, however, due to chainloading it doesn't work at the moment but added it anyway. But it looks nicer regardless.

Added a Vöid Lite, which does not include the Payloads and PC Tools

HB Appstore cache update and shows what you have installed.

General clean up, so with a fresh install of Vöid you will no longer get multiple of the same versions of Homebrew Apps.

NOT TESTED

Hekate now boots by chainloading Fusee Primary, so HGB Shop should work, please let me know if this isn't the case as the website is down and I couldn't test it.

Again, thank you for everyone who actually uses this, it's blown my mind even one person uses it to be honest. As I've said previously, I understand if you'd rather use something else, this is just for fun and the set up I use and I'm here to make everything noob friendly, but, if anything doesn't work, you'd like anything changed, or you'd like a general chat, please let me know here, in my DMs or on Discord.

I am mostly a user of the not so loved OS but I like to keep Atmo on my switch for dual-booting if needed, thank you for making this for us!

tend57 · Jun 8, 2020

Synecdoche said:
Void 3.0 is out now.

It's a decent update, but the biggest change is it now uses Fusee Primary by chainloading through Hekate, so HGB Shop SHOULD work, however, I cannot test it at this time as the website is down and I can't find a download to test it, so please let me know if it works or not.

All changes are tested and are working on a fresh SD Card and clean NAND this time. Except for HGB Shop.

I can confirm the following works:

Atmosphere Incognito correctly removes your serial. You can check this in settings > system > serials and you should get [Three Letters]00000000 in your serial section.

Homebrew Appstore does correctly show you what is installed now.

Hekate loads Atmosphere correctly.

There are no more duplicates.

Installing and running games do work.

All Homebrew are up to date (Let me know if I missed one)

Changes:

All Homebrew apps updated

Added the following:

VGEdit

Emuiibo

Amiigo

NX Theme Injecter

Status Monitor Overlay

SYS Tune Overlay

Updated Bootlogo, however, due to chainloading it doesn't work at the moment but added it anyway. But it looks nicer regardless.

Added a Vöid Lite, which does not include the Payloads and PC Tools

HB Appstore cache update and shows what you have installed.

General clean up, so with a fresh install of Vöid you will no longer get multiple of the same versions of Homebrew Apps.

NOT TESTED

Hekate now boots by chainloading Fusee Primary, so HGB Shop should work, please let me know if this isn't the case as the website is down and I couldn't test it.

Again, thank you for everyone who actually uses this, it's blown my mind even one person uses it to be honest. As I've said previously, I understand if you'd rather use something else, this is just for fun and the set up I use and I'm here to make everything noob friendly, but, if anything doesn't work, you'd like anything changed, or you'd like a general chat, please let me know here, in my DMs or on Discord.

I installed your earlier Version and set it up on a emummc on a hidden partition using hekate. Can i just delete all files on my sd card and replace them with the new ones without deleting my games and saves?

layzMich3l · Jun 8, 2020

fyi sig patches are not updated for fused or something. Games did not work and had to download them myself

Synecdoche · Jun 8, 2020

tend57 said:
I installed your earlier Version and set it up on a emummc on a hidden partition using hekate. Can i just delete all files on my sd card and replace them with the new ones without deleting my games and saves?

That's correct yes

layzMich3l said:
fyi sig patches are not updated for fused or something. Games did not work and had to download them myself

Oh no, seriously? One day I'll release a proper version

blinky87 · Jun 8, 2020

Thanks for the new update! I still can't get incognito to work. Can you tell me what version of incognito you are using? Maybe I have a bad version.

**Edit** Well, it is working sort of. It is changing the console serial number so that is good. I thought it was supposed to blank out all of the 3 serial numbers. Maybe v6.2 is different.

Synecdoche · Jun 8, 2020

blinky87 said:
Thanks for the new update! I still can't get incognito to work. Can you tell me what version of incognito you are using? Maybe I have a bad version.

**Edit** Well, it is working sort of. It is changing the console serial number so that is good. I thought it was supposed to blank out all of the 3 serial numbers. Maybe v6.2 is different.

It only blanks out the serial of emuNAND, not all of them, if it's blanking the serial it's working.

Hacking RELEASE Vöid-NX - Another All-In-One Custom Firmware

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum