Tutorial
Updated
How to setup SysDVR with playable latency
There doesn't seem to be much documentation on this, so I decided to write up a guide. With my testing I can't get audio working, it breaks everything severely. If you can get audio working with the same low-latency, let me know and I'll update the guide.
Downloads:
Extraction:
VLC Setup:
USB Setup (Skip if using network):
Network Setup (Skip if using USB):
Launch (USB):
Launch (Network)
You should be all set up! You can now follow the launch instructions whenever you'd like to stream.
This guide was written/tested using the USB mode. The network instructions were pieced together off information that I could find, so please let me know if there are any issues, I will edit the guide. If you need any help/support feel free to leave a comment!
Downloads:
- The latest version of SysDVR-Client
- The latest version of SysDVR (Stream over WiFi) or SysDVR-USB-Only (Stream over USB)
- VLC 2.2.8 (32-bit Windows ll 64-bit Windows)
- Zadig (For USB Only)
Extraction:
- Extract either SysDVR.zip or SysDVR-USB-Only.zip to the root of your SD Card
- Extract vlc-2.2.8-win[32 or 64].7z to its own folder
- Extract SysDVR-Client.7z to its own folder
VLC Setup:
- Start vlc.exe from your VLC folder
- If prompted, do not update VLC
- Select "Tools" > "Preferences" at the top of the window
- Select the "Inputs / Codecs" Tab
- Set "Hardware-accelerated decoding" to "Automatic"
- Set "Live555 stream transport" to "RTP over RTSP (TCP)"
- Set "Show settings" in the bottom-left corner to "All"
- Select the "Inputs / Codecs" Tab
- Set "Network caching (ms)" to 100
- Select "Save"
USB Setup (Skip if using network):
- Connect your switch to your PC via USB (Tested using USB 3.0)
- Launch Zadig
- Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing. If you are using the full version of SysDVR on your Switch make sure to start it using the SysDVR config in the Homebrew Launcher.]
Network Setup (Skip if using USB):
- Open the Homebrew Launcher
- Launch the SysDVR Config app
- Select "Stream over RTSP"
- Close the Homebrew Launcher
Launch (USB):
- Connect the Switch to your PC via USB
- Open a compatible game on the Switch (Games that support capture recording)
- Open SysDVR-Client.exe on your PC
- Type "SysDVR-Client.exe bridge [Your PC's IP Adress Here] --no-audio and hit 'Enter'
- Open VLC
- Inside VLC select "Media" > "Open Network Stream..."
- Type or copy/paste "rtsp://127.0.0.1:6666/" (Without the Quotes) and select "Play"
Launch (Network)
- Open a compatible game on the Switch (Games that support capture recording)
- Open SysDVR-Client.exe on your PC
- Type "SysDVR-Client.exe bridge [Your Switch's IP Adress Here] --no-audio and hit 'Enter'
- Open VLC
- Inside VLC select "Media" > "Open Network Stream..."
- Type or copy/paste "rtsp://127.0.0.1:6666/" (Without the Quotes) and select "Play"
You should be all set up! You can now follow the launch instructions whenever you'd like to stream.
This guide was written/tested using the USB mode. The network instructions were pieced together off information that I could find, so please let me know if there are any issues, I will edit the guide. If you need any help/support feel free to leave a comment!
Last edited by nintenbrolluseless,