Homebrew RELEASE Chiaki (PS5 & PS4 remote play) homebrew

TimeDevouncer · Jun 2, 2020

Thanks, for me doesn't work, green screen and nothing more, it's strange... I don't change anything

PiracyForTheMasses · Jun 2, 2020

Devilm00n said:
Unless a new FW was released last week, yes it does

PS4 did get an update the other day, not sure if that is the issue or not. I personally have not tried it since the update released.

Crashdummyy · Jun 2, 2020

TimeDevouncer said:
Chiaki works with the new ps4 system firmware? I can't use it, I got a green screen when I try to run Chiaki

Have you tried running chiaki from album ( not overriding title to access full ram ).
That solved the Problem for me regarding the green screen.

My PS4 is on the latest update ( checked it again right now ) and chiaki works flawlessly

TimeDevouncer · Jun 2, 2020

Crashdummyy said:
Have you tried running chiaki from album ( not overriding title to access full ram ).
That solved the Problem for me regarding the green screen.

My PS4 is on the latest update ( checked it again right now ) and chiaki works flawlessly

Rhank you, but nope, 10 mins with the green screen, I don't understand, two days sgo works fine

Devilm00n · Jun 2, 2020

Have you tried reinstalling it?

sorabora · Jun 2, 2020

Devilm00n said:
Unless a new FW was released last week, yes it does

7.51 was released last week, yes.

TimeDevouncer · Jun 2, 2020

Devilm00n said:
Have you tried reinstalling it?

Yes, no luck, I put the connection code and...green screen

EDIT

Nevermind!! My fault :rofl2:

, the problem are the PS4's IP

, solved!

Djakku · Jun 3, 2020

@H0neyBadger , I did compiled successfully your port few week back but now
I have tried to compile the project on linux with the updated devkitpro but I have and error:

[ 90%] Linking CXX executable chiaki
[...]
aarch64-none-elf-g++: fatal error: /opt/devkitpro/libnx/switch.specs: attempt to rename spec 'link' to already defined spec 'old_link'
compilation terminated.
make[2]: *** [switch/CMakeFiles/chiaki.dir/build.make:144: switch/chiaki] Error 1
make[2]: Leaving directory '/home/djakku/nx-project/4ever/build_switch'
make[1]: *** [CMakeFiles/Makefile2:379: switch/CMakeFiles/chiaki.dir/all] Error 2
make[1]: Leaving directory '/home/djakku/nx-project/4ever/build_switch'
make: *** [Makefile:133: all] Error 2

do you have any suggestion?

Devilm00n · Jun 3, 2020

@Djakku https://gbatemp.net/threads/sdl2-switch-development-woes.501366/ towards the bottom of the first page there's someone who had your same problem

br7an5477 · Jun 4, 2020

Not sure if anyone else has had this issue.

I have everything working and I overclocked my Switch. However, it seems like it’s locked at 30fps. I have it set to 60fps in my configuration file.

ElTuberias · Jun 5, 2020

hippy dave said:
I made a forwarder, just so I can have overclock set for this app every time without affecting other homebrew. Forwarders can apparently cause issues in some cases (eg I know there are potential problems with retroarch), so try at your own risk. If you have any issues while using it, see if you get them without using the forwarder before reporting.

e: it runs /switch/chiaki/chiaki.nro

Thanks
How do i use this?

hippy dave · Jun 5, 2020

ElTuberias said:
Thanks
How do i use this?

Install it with, e.g, Awoo installer, then you can run it from your home menu, assuming you've got the nro and its config file located appropriately.

ElTuberias · Jun 5, 2020

hippy dave said:
Install it with, e.g, Awoo installer, then you can run it from your home menu, assuming you've got the nro and its config file located appropriately.

Thanks it works perfectly after overclocking yhe cpu to 1224hz. I am very happy. thanks again to hippy dave and H0neyBadger

RAGER · Jun 5, 2020

I'm currently using Remote Play on my laptop in my office with 2.4GHz Wi-Fi to play PS4 games back at home (Wi-Fi 5GHz with white/real ip).
Will it be possible to use Switch for that purpose or not? Anyway thanks for your work!

Devilm00n · Jun 6, 2020

someone a few posts back tried to get it running outside of local network but was having problems, don't know if they managed to solve them

ElTuberias · Jun 6, 2020

I tried running a 60 fps game at 60 fps, but I get the graphical errors.even with the cpu at 1785 Hz.

FamicomHeero · Jun 7, 2020

Maybe this has been answered but if the switch is in docked mode can you use a PS4 controller or would there be plans to do so?

Rahkeesh · Jun 7, 2020

sys-con supports DS4 if its wired. Presumably that dev is gradually working on wireless support too.

Devilm00n · Jun 7, 2020

ElTuberias said:
I tried running a 60 fps game at 60 fps, but I get the graphical errors.even with the cpu at 1785 Hz.

same, I guess the Switch cannot handle decoding 60fps. It's a bit strange since Moonlight seems to be able to handle 60fps though, maybe it comes down to optimization?

Mrdx · Jun 7, 2020

hippy dave said:
I made a forwarder, just so I can have overclock set for this app every time without affecting other homebrew. Forwarders can apparently cause issues in some cases (eg I know there are potential problems with retroarch), so try at your own risk. If you have any issues while using it, see if you get them without using the forwarder before reporting.

e: it runs /switch/chiaki/chiaki.nro

Do we need to install anything with this forwarder (like sys-clk)?

Homebrew RELEASE Chiaki (PS5 & PS4 remote play) homebrew

User experience

good

decent

terrible

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Member

Member

BBMB

Member

Well-Known Member

Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Similar threads

Popular threads in this forum