Hacking SWITCH NOOB PARADISE - Ask questions here

Goku1992A · May 29, 2020

Quick question I'm planning on upgrading my CFW on my emmunand my question is if something goes wrong can I just delete everything and try again? These are the instructions I have I guess my other question where shall I place the new CFW files at I'm targeting the 10.0.2 release

Draxzelex · May 29, 2020

VEOS said:
Hello,

I tried updating with choidujournx to the firmware 10.0.3 but after trying to boot I get the error
pkg2 decryption failed
is sept updated?
failed to launch HOS!

could anybody please what I need to do to fix this?

With best regards

Update your CFW as is evidenced when it asks "is sept updated?"

Goku1992A said:
Quick question I'm planning on upgrading my CFW on my emmunand my question is if something goes wrong can I just delete everything and try again? These are the instructions I have I guess my other question where shall I place the new CFW files at I'm targeting the 10.0.2 release

View attachment 211155

View attachment 211155

It depends if your emuMMC is file or partition based but as long as you have a copy of it, it is pretty easy to restore to your SD card.

Goku1992A · May 30, 2020

Draxzelex said:
Update your CFW as is evidenced when it asks "is sept updated?"

It depends if your emuMMC is file or partition based but as long as you have a copy of it, it is pretty easy to restore to your SD card.

I did the partition thing Emummc RAW 1 I do see the folder however it is like 300gb I dont really care about the games I was just going to backup my save files via checkpoint before I continue so after when the firmware flashes I just put my new CFW files and then turn it on and evreything should be good?

Is AutoRCM going to effect my fuse counts after I disable it once I'm finished upgrading? My sysnand will still be 9.1.0 but my emmunand will be 10.0.2

Draxzelex · May 30, 2020

Goku1992A said:
I did the partition thing Emummc RAW 1 I do see the folder however it is like 300gb I dont really care about the games I was just going to backup my save files via checkpoint before I continue so after when the firmware flashes I just put my new CFW files and then turn it on and evreything should be good?

Is AutoRCM going to effect my fuse counts after I disable it once I'm finished upgrading? My sysnand will still be 9.1.0 but my emmunand will be 10.0.2

AutoRCM has no effect on emuMMC and emuMMC has no effect on fuses.

Goku1992A · May 30, 2020

Draxzelex said:
AutoRCM has no effect on emuMMC and emuMMC has no effect on fuses.

Okay I was confused about the Choi since it asks you to enable AUTO RCM to prevent burning a fuse I guess that only applies to SYSNAND

Draxzelex · May 30, 2020

Goku1992A said:
Okay I was confused about the Choi since it asks you to enable AUTO RCM to prevent burning a fuse I guess that only applies to SYSNAND

ChoiDujourNX was created before emuMMC and hasn't been updated in a long time but it still works well enough for its original purpose.

Goku1992A · May 30, 2020

Draxzelex said:
ChoiDujourNX was created before emuMMC and hasn't been updated in a long time but it still works well enough for its original purpose.

Thanks! I'll give it a go hopefully I don't screw anything up

EDIT: I updated to 10.0.2 perfectly it wasn't as bad as I thought my sysnand is still on 9.1.0

Galebourn · May 30, 2020

Okay, another quick question.
If I want to have sxos and atmosphere, do I have to do more than changing the emummc file?
Do I have to make changes to the hekate_ipl.ini file?

emilio99 · May 30, 2020

Hi Guys, short question: when I find an older Switch which is hackable in general, do I have to consider which firmware is installed? Or means hackable that it is always hackable?

Blithe34 · May 30, 2020

I have a short question:can sys-con(way to connect xbox and playstation controllers)damage my switch in any way?

Draxzelex · May 30, 2020

Galebourn said:
Okay, another quick question.
If I want to have sxos and atmosphere, do I have to do more than changing the emummc file?
Do I have to make changes to the hekate_ipl.ini file?

No, you can have both SX OS and Atmosphere on one SD card.

emilio99 said:
Hi Guys, short question: when I find an older Switch which is hackable in general, do I have to consider which firmware is installed? Or means hackable that it is always hackable?

The latter; the exploit used on unpatched consoles relies on a hardware exploit so there is no way for Nintendo to patch it via a firmware update.

Blithe34 said:
I have a short question:can sys-con(way to connect xbox and playstation controllers)damage my switch in any way?

To the best of my knowledge, no.

emilio99 · May 30, 2020

Draxzelex said:
No, you can have both SX OS and Atmosphere on one SD card.

The latter; the exploit used on unpatched consoles relies on a hardware exploit so there is no way for Nintendo to patch it via a firmware update.

To the best of my knowledge, no.

Thx

George820 · May 30, 2020

Hey guys, ran into a bit of a problem today after updating my Animal Crossing game via local transfer. I updated the game on my homebrew Switch (running Atmosphere on 9.2.0 AMS 0.10.5|S) from my second switch for going online (10.0.3 stock) and after the update completed, the homebrew Switch said it would restart. It got stuck and hung onto a black screen for like 10 minutes with no response so I force restarted and rebooted with RCM. When I tried to boot back into the Emummc it gave me some error so I thought I would update to the latest Hekate 5.2.1 bin and RCM again.

Now I'm stuck when trying to boot into CFW Emummc it tells me in red letters "failed to apply nosigchk" and "failed to launch hos"

I have no idea what to do next. Do I need to update the system to 10.0.3 too? I didn't realize updating the game itself locally would mess up my homebrew since I did it a few times before. :/

pLaYeR^^ · May 30, 2020

George820 said:
Hey guys, ran into a bit of a problem today after updating my Animal Crossing game via local transfer. I updated the game on my homebrew Switch (running Atmosphere on 9.2.0 AMS 0.10.5|S) from my second switch for going online (10.0.3 stock) and after the update completed, the homebrew Switch said it would restart. It got stuck and hung onto a black screen for like 10 minutes with no response so I force restarted and rebooted with RCM. When I tried to boot back into the Emummc it gave me some error so I thought I would update to the latest Hekate 5.2.1 bin and RCM again.

Now I'm stuck when trying to boot into CFW Emummc it tells me in red letters "failed to apply nosigchk" and "failed to launch hos"

I have no idea what to do next. Do I need to update the system to 10.0.3 too? I didn't realize updating the game itself locally would mess up my homebrew since I did it a few times before. :/

You very likely updated to 10.0.3. Update your CFW and Hekate to their latest version and download new sigpatches.

rollpaste23 · May 31, 2020

Is there a possibility of the switch lite as well as the V2 switch getting the CFW without installing a chip in the future?

Draxzelex · May 31, 2020

rollpaste23 said:
Is there a possibility of the switch lite as well as the V2 switch getting the CFW without installing a chip in the future?

Highly unlikely if not impossible.

Krakenfy · May 31, 2020

Hello, has anyone updated cfw with matching FW from other OFW console? I have both cfw and ofw console and as cfw is on 8.0.1 I'm thinking of instead using Choi just to match 10.0.3 from my OFW but can't find on internet that anyone actually did that without problem?

George820 · May 31, 2020

pLaYeR^^ said:
You very likely updated to 10.0.3. Update your CFW and Hekate to their latest version and download new sigpatches.

That's what I thought at first but I booted into the stock system and it was still running 9.2.0. Any other way to fix without upgrading the whole system to 10.0.3?

RODIFIRE · May 31, 2020

hello I try to find if I can do it to my switch but I get little lost
(I remember I had lower firmaware and never use internet to my switch maybe from game he do update with out want it? I dont know)

anyway

I have a switch and current system verison is : 8.0.1
can I do something to it?
if someone can help me

thanks for your time

CosmoAquanaut · May 31, 2020

fatsquirrel said:
I know its not hacking related, but why on earth wont my joycons charge when hooked up on the main device (but not plugged in the dock) ?

Do you have a modded console? what Payloader r u using?

Hacking SWITCH NOOB PARADISE - Ask questions here

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Member

Well-Known Member

Member

Member

Doctor Switch

New Member

Well-Known Member

Member

Member

Well-Known Member

Member

Similar threads

Popular threads in this forum