Hardware [HACK] problem to rebuild the nand (Help me please)

JeremyKO · May 29, 2020

Hello I would like to warn you that I am French and that I use google translation so if some translation is not stable understand me as best as you could 1 years ago I had done some bullshit on my Nintendo switch I could just turn it on by the rcm mode I recently watch a video to reconstruct the nand but the problem is that it even affected my "Bis Keys" which prevents me from reconstructing the nand there would be a solution to rebuild the nand and "Bis Keys" and it does not matter if I lose all my data (I have no backup) (if you also need to rebuild the BOOT1 and BOOT2 I will do it)

here is some information that might be useful for you :

bombob · May 29, 2020

1-You need a valid backup even Partial will do
2-you should not share your BISkey with the entire world

Hayato213 · May 29, 2020

https://switch.homebrew.guide/usingcfw/manualchoiupgrade
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

/You can check out these two guides, what you can do is use that Bis Key of your and try to rebuild your NAND if your doesn't boot, always keep a NAND backup around to save yourself from headaches such as this. Also don't share your keys around here.

JeremyKO · May 30, 2020

ok but on the other hand I did not make any backup before having this problem

Hayato213 · May 30, 2020

If your doesn't boot and you don't have a working NAND backup with the correct boot 0/ boot1 you need to use Rajkosto guide to rebuild your NAND, Good luck.

LapCheong · May 30, 2020

No biskey and thats it

JeremyKO · May 30, 2020

yeah so it will work more?

LapCheong · May 30, 2020

JeremyKO said:
yeah so it will work more?

Hayato213 said:
https://switch.homebrew.guide/usingcfw/manualchoiupgrade
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

/You can check out these two guides, what you can do is use that Bis Key of your and try to rebuild your NAND if your doesn't boot, always keep a NAND backup around to save yourself from headaches such as this. Also don't share your keys around here.

Do this guide

If i am not wrong your biskey is taken from your boot0/boot1 files. So you messed and didn't backup too bad...

JeremyKO · May 30, 2020

Lacius · May 30, 2020

I helped @JeremyKO over PM. We hopefully have the BIS keys, and we're attempting to rebuild the eMMC.

Hardware [HACK] problem to rebuild the nand (Help me please)

Active Member

Well-Known Member

Newcomer

Active Member

Newcomer

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Similar threads

Popular threads in this forum