Read first post instructions.sorry for all the Qs, but is all I do is copy the file from the OP to the root of my sd card and run XB for it to work or is there something else I need to apply?
Read first post instructions.sorry for all the Qs, but is all I do is copy the file from the OP to the root of my sd card and run XB for it to work or is there something else I need to apply?
thanks.Read first post instructions
thanks.
Where on SX OS is that folder?
Thanks.xos" on the root of your card. if not, make one and follow same instruction
So this is my lib_nx.ini. The logic here is that humans are actually more sensitive to horizontal resolution than we are vertical, so I've prioritized horizontal resolution at the expense of vertical. In other words, this config file will reduce resolution down to a minimum of 576 x 432 compared to the default 672 x 378. Not only is the subjective image quality better at the minimum resolution, but an added bonus of my file is that the amount of pixels is also reduced over default (248,832 pixels vs 254,016 pixels).
My understanding is that it isnt possible to overclock sxos since sysmodules dont work with it.
What do you mean torna resolution tweak?
Max resolution for portable mode is 540p.hows the performance in handheld 480p/720p static? and with what settings? with overclocks of course
Yes I did.Did you follow the same OC values?
Docked Mode set with ReverseNXAre those screenshots from Docked or Undocked mode?
Yes I did.
Docked Mode set with ReverseNX
Nope I oced to 1300/460/1600mhzThat's why... You're trying to use the docked play with handheld frequencies... Of course it's stuttering...
460 is still too low for dock.Nope I oced to 1300/460/1600mhz
Yes I did.
Docked Mode set with ReverseNX
Yes exactly didn't know this was wrong -.-'You modified the ini and also activated ReverseNX? That would explain why Test 3 is bad...
Yes exactly didn't know this was wrong -.-'
The test 3 works really well. Have you tried lowering the GPU and RAM OC to check if it has any impact in performance? With those values the console gets a little hot after a while and I wonder if less CPU and RAM could still work...
EDIT: ok I tried without overclocking the CPU and RAM (only GPU at 460 Mhz) and the performance is exactly the same. Why did you set those high values???