Homebrew RELEASE Chiaki (PS5 & PS4 remote play) homebrew

princessvini · May 13, 2020

still dosen't work :/

Apostal13 · May 13, 2020

Hi! After entering PIN I get the following screen(in attachment)
Though usning nxlink everything goes fine
Have no SaltyNX installed

Update: found a solution
The problem was that I was trying to connect PS4 outside my local network using domain instead of using direct address. Though Chiaki for other platforms can work with domains.

H0neyBadger · May 14, 2020

Apostal13 said:
Hi! After entering PIN I get the following screen(in attachment)
Though usning nxlink everything goes fine
Have no SaltyNX installed

Update: found a solution
The problem was that I was trying to connect PS4 outside my local network using domain instead of using direct address. Though Chiaki for other platforms can work with domains.

Hello sorry for the late reply.
What do you mean by network domains ?
Are you running the switch from a different network subnets ?

--------------------- MERGED ---------------------------

princessvini said:
still dosen't work :/

FYI: princessvini 's issue has been solved in private messages

TimeDevouncer · May 14, 2020

Strange, the first times chiaki runs after two-three seconds,now requires 30-35 secs

Apostal13 · May 15, 2020

H0neyBadger said:
Hello sorry for the late reply.
What do you mean by network domains ?
Are you running the switch from a different network subnets ?

--------------------- MERGED ---------------------------

FYI: princessvini 's issue has been solved in private messages

Yes, you are right. I meant that instead of using ipv4 address in config I used domain that redirects to ip address. Now it works great. I use 5Ghz wifi network for switch and my friend's Ps4 Pro is connected via cable. Thank you for great work!

dragonking · May 16, 2020

I can confirm that before my PS4 used a wired connection I had all the graphical glitch problems and now that my PS4 has a wired connection everything works perfect!

Rahkeesh · May 17, 2020

Been playing a lot of FF7R with this homebrew and with a 1330ish overclock its been totally awesome, better than running the official app on android even, likely due to wonky wi-fi and joycon support. I do dock it so wish I could touch-press with minus but other than that it's been great. Maybe minus = touch press and minus + plus together equals PS button? PS button isn't one I'm using super often.

alucard77 · May 17, 2020

Just curious if this could ever work with the PS3 as well. There are some classics I wouldn't mind playing.

Thexrobertox · May 17, 2020

which version of HOS are you using? Because im on 9.2.0 with OC and i have the same image issues and is not my wifi tnx

H0neyBadger · May 17, 2020

Thexrobertox said:
which version of HOS are you using? Because im on 9.2.0 with OC and i have the same image issues and is not my wifi tnx

I started the dev form 9.2.0, but now I m running on 10.0.2.

--------------------- MERGED ---------------------------

alucard77 said:
Just curious if this could ever work with the PS3 as well. There are some classics I wouldn't mind playing.

I think the ps3 remote protocol is really different.
I do not personal own a ps3 so I cannot help.
let's hope they will not change everything for the ps5.

mattyxarope · May 18, 2020

To be clear, it's not possible to play without updating your PS4 - right?

hippy dave · May 18, 2020

mattyxarope said:
To be clear, it's not possible to play without updating your PS4 - right?

I'm using it in 5.05, you need to run a Remote Play Enabler payload.

If you're above 5.05 and below current, you might struggle, idk

mattyxarope · May 18, 2020

hippy dave said:
If you're above 5.05 and below current, you might struggle, idk

Yeah, I'm on 6.00 but don't want to update :/ Oh well...

tecniqueza · May 20, 2020

chiaki works well on the switch at 1080p and 60fps, (Ps4 Pro) on cable and 5g wifi but with sys-clk 1785mhz CPU, 1600mhz RAM, 921mhz GPU, no lag and no perfect blurred image! thanks H0neyBadger for the beautiful work

aesop · May 20, 2020

Is there a tut for making this? I've read through the thread and still confused as to how build the actual app. I have hippie Dave's nsp but lost as where to go from there. Any help is appreciated ty.

hippy dave · May 20, 2020

aesop said:
Is there a tut for making this? I've read through the thread and still confused as to how build the actual app. I have hippie Dave's nsp but lost as where to go from there. Any help is appreciated ty.

You can just download the ready made app from the link at the bottom of the first post. If you still want to compile it yourself, you need Devkit Pro etc, there are setup guides if you Google, but this isn't needed if you just want to run the app as-is.

aesop · May 20, 2020

hippy dave said:
You can just download the ready made app from the link at the bottom of the first post. If you still want to compile it yourself, you need Devkit Pro etc, there are setup guides if you Google, but this isn't needed if you just want to run the app as-is.

I'm using sxos and when I launch the nro file from homebrew menu it crashes. When I launch using the nsp you made it says there was an error. I'm whatever I'm doing is super easy and I an idiot but I could still use more help. lol

hippy dave · May 20, 2020

aesop said:
I'm using sxos and when I launch the nro file from homebrew menu it crashes. When I launch using the nsp you made it says there was an error. I'm whatever I'm doing is super easy and I an idiot but I could still use more help. lol

From the github release page you just need the chiaki.nro file. You also need to make the config file as described & discussed in this thread. The nsp forwarder expects to find /switch/chiaki/chiaki.nro

I haven't used it on SX OS, but for me on atmosphere it crashed when I had the SaltyNX sysmodule loaded. Check if you have that or any other extra sysmodules running and try without, and see if anyone else can tell you if it should work on SX OS.

H0neyBadger · May 20, 2020

tecniqueza said:
chiaki works well on the switch at 1080p and 60fps, (Ps4 Pro) on cable and 5g wifi but with sys-clk 1785mhz CPU, 1600mhz RAM, 921mhz GPU, no lag and no perfect blurred image! thanks H0neyBadger for the beautiful workView attachment 209739

to be honest the 1080p is scaled down to 720p on nintendo switch screen.
it just consume more network and cpu (all inconvenient without benefits).
thank you a lot for sharing your setup .

I tried to reorganize class and internal struct.
but simply changing the the main video loop from a simple class is enough to cause trouble in performance.
same code ... different class ... performance penalty.
I cannot explain what's wrong.
we definitely miss hardware acceleration to decode h.264.
I'm really want to make it work at regular cpu clock.
I m still digging

aesop · May 20, 2020

hippy dave said:
From the github release page you just need the chiaki.nro file. You also need to make the config file as described & discussed in this thread. The nsp forwarder expects to find /switch/chiaki/chiaki.nro

I haven't used it on SX OS, but for me on atmosphere it crashed when I had the SaltyNX sysmodule loaded. Check if you have that or any other extra sysmodules running and try without, and see if anyone else can tell you if it should work on SX OS.

Oh ok, I had the file folder structure wrong.. trying again now. Ty

Homebrew RELEASE Chiaki (PS5 & PS4 remote play) homebrew

User experience

good

decent

terrible

Well-Known Member

New Member

Attachments

Well-Known Member

Well-Known Member

New Member

Active Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

BBMB

Well-Known Member

Member

Member

BBMB

Member

BBMB

Well-Known Member

Member

Similar threads

Popular threads in this forum