Hacking I keep getting 2002-4000

spdrman8 · Oct 3, 2019

I upgraded from 8 to 9 using chox but something happened and I wound up just officially updating to 9.0.1. probably a stupid move on my part. But, 9.0+ is needed for Ghostbusters and probably the coming Luigi's Mansion. So after I updated I installed the latest Kosmos 14.2. copied over any updates sig patch files. But I keep getting 2002-4000 errors/corrupted file. I tried using Goldtree 7.3 and Quark but, my computer doesn't see the switch even though the switch has USB icon. Tried reinstalling Ghostbusters VIA litium and SD card but it still says corrupted. I can't launch any homebrew through to NSP shortcut I have to launch it via NRO in the homebrew channel. Only few a games work now. like go vacation and goat simulator. But mario maker 2 and ghostbusters doesn't. Besides Ghostbusters all my other games worked before! What did/do I need to do? Should I start fresh on the SD? Is there a tutorial for that?

OFW 9.0.1
Kosmos 14.2
9/10 ES/EF PATCHES
using hakete to load then push Fusee_primary payload

Goldtree 7.3
using quark but it doesn't see my PC even though its connected on the switch end.

Engezerstorung · Oct 3, 2019

for quark, you need to launch it only once goldtree already started or it will not link
(hope this help)

spdrman8 · Oct 3, 2019

Engezerstorung said:
for quark, you need to launch it only once goldtree already started or it will not link
(hope this help)

I have done it this way but unfortunately, It remains the same. windows see the switch but Quark does not.

AmandaRose · Oct 3, 2019

Taken from Nintendo's UK website.

Error Codes: 2002-4000 to 2002-4263
Applies to: Nintendo Switch Lite, Nintendo Switch, Nintendo Switch Family

The information in this article can help you when an error code from 2002-4000 to 2002-4263 is received while using Nintendo Switch.

What to do
Ensure the console has the latest system update.
Check for corrupt data for the most recent software that was used.
If the error persists and a microSD card is being used, format the microSD card.
Important: If screenshots are stored on the microSD card, be sure to first back up the information on a computer.

If the issue continues, try using a different microSD card.
If the error is not resolved, power off the console and remove the microSD card. Then try using the console as normal.
If the error was occurring while using a game, delete the problematic software and redownload it directly to the system memory.
Situation not resolved
If the error persists, the Nintendo Switch console will need to be repaired.

Please contact us for support.

spdrman8 · Oct 3, 2019

AmandaRose said:
Taken from Nintendo's UK website.

Error Codes: 2002-4000 to 2002-4263
Applies to: Nintendo Switch Lite, Nintendo Switch, Nintendo Switch Family

The information in this article can help you when an error code from 2002-4000 to 2002-4263 is received while using Nintendo Switch.

What to do
Ensure the console has the latest system update.
Check for corrupt data for the most recent software that was used.
If the error persists and a microSD card is being used, format the microSD card.
Important: If screenshots are stored on the microSD card, be sure to first back up the information on a computer.

If the issue continues, try using a different microSD card.
If the error is not resolved, power off the console and remove the microSD card. Then try using the console as normal.
If the error was occurring while using a game, delete the problematic software and redownload it directly to the system memory.
Situation not resolved
If the error persists, the Nintendo Switch console will need to be repaired.

Please contact us for support.

I'm going to transfer all 256GB OF data and start fresh. the SD is ExFAT. format it like that? or try FAT32?

AmandaRose · Oct 3, 2019

spdrman8 said:
I'm going to transfer all 256GB OF data and start fresh. the SD is ExFAT. format it like that? or try FAT32?

I would try FAT32 as ExFAT has been known to cause issues on the Switch

spdrman8 · Oct 3, 2019

AmandaRose said:
I would try FAT32 as ExFAT has been known to cause issues on the Switch

That's what I'll do when then when the copying gets done in an hour. Lol. Ill let you know. Thanks.

jajamundo · Oct 3, 2019

The problem to start using fat32 instead exfat is that you need to install the 9.0.1 firmware as FAT32 using choi.

spdrman8 · Oct 3, 2019

jajamundo said:
The problem to start using fat32 instead exfat is that you need to install the 9.0.1 firmware as FAT32 using choi.

I have ofc 9.0.1. do I need Choi 9.0.1???

arianadark · Oct 3, 2019

spdrman8 said:
I upgraded from 8 to 9 using chox but something happened and I wound up just officially updating to 9.0.1. probably a stupid move on my part. But, 9.0+ is needed for Ghostbusters and probably the coming Luigi's Mansion. So after I updated I installed the latest Kosmos 14.2. copied over any updates sig patch files. But I keep getting 2002-4000 errors/corrupted file. I tried using Goldtree 7.3 and Quark but, my computer doesn't see the switch even though the switch has USB icon. Tried reinstalling Ghostbusters VIA litium and SD card but it still says corrupted. I can't launch any homebrew through to NSP shortcut I have to launch it via NRO in the homebrew channel. Only few a games work now. like go vacation and goat simulator. But mario maker 2 and ghostbusters doesn't. Besides Ghostbusters all my other games worked before! What did/do I need to do? Should I start fresh on the SD? Is there a tutorial for that?

OFW 9.0.1
Kosmos 14.2
9/10 ES/EF PATCHES
using hakete to load then push Fusee_primary payload

Goldtree 7.3
using quark but it doesn't see my PC even though its connected on the switch end.

for kosmos use the patches on the github not the ones here on gbatempt

spdrman8 · Oct 3, 2019

FIXED IT! The sig patches here on GBAtemp actually worked

dwarfourion · Oct 3, 2019

Can you give me the link too for the sigpatches? Having the samw problem!

spdrman8 · Oct 3, 2019

dwarfourion said:
Can you give me the link too for the sigpatches? Having the samw problem!

Code:

https://gbatemp.net/attachments/2-0-0-9-0-1-zip.181415/

Just download this and drag onto the root of the SD replacing anything that it asks.

zhanghu · Jan 3, 2020

is the link accessible now? i can't open this link. i get the same error when start
Super Mario Odyssey. can i use the same patch to fix it?

zhanghu · Jan 3, 2020

is the link accessible now? i can't open this link. i get the same error when start
Super Mario Odyssey. can i use the same patch to fix it?

FoX80 · Apr 9, 2020

I' m having this same issue after upgrading from from 9.0.1 | AMS09.4 | E to 9.2.0|AMS 0.10.5|E!
Now, at least Mario Kart 8 (with dozens of hours!), Pokemon Sword, Luigi' s Mansion 3, Ring Fit and Tinfoil don't load! Some of them do load...
What can I do to don't have many many hours down the drain?!?!
Thanks

EDIT: Used this fork of Atmos 0.10.5 and after installing Tinfoil, all the game that were having errors, after data verification loaded correctly!!!
(can't use links but for someone with the same problem, search in GitHub...)

Hacking I keep getting 2002-4000

Member

Well-Known Member

Member

Do what I do. Hold tight and pretend it’s a plan

Member

Do what I do. Hold tight and pretend it’s a plan

Member

Well-Known Member

Member

Well-Known Member

Member

New Member

Member

New Member

New Member

Member

Similar threads

Popular threads in this forum