Hacking Question Can’t start any NSP! Help!

issayloki

Well-Known Member
Member
Joined
Mar 4, 2018
Messages
146
Trophies
0
Age
43
XP
1,386
Country
Thailand
I followed the guide till I had to download HacDiskMount.
I need 64Bit for it and I have only 32Bit.
I guess that option is out.
Looks like nothing works ...

--------------------- MERGED ---------------------------



From all technical difficulties I’ve ever had in anything, Switch's 9.1.0 is the worst thing ever happen to me.
You mean the program it self?.
 

GerBrew

Well-Known Member
OP
Newcomer
Joined
Jul 18, 2017
Messages
93
Trophies
0
XP
263
Country
Germany
Update:

I literally tried everything within my power and I’ve run out of ideas.

My Xbox Live Friend who I know for over 5 years is a bit more into this whole Homebrew thing, and he offered me to take a look at it.

Sadly he lives across the country, so I have to send it to him with a packet.

I give him my Switch and my Micro SD Card with my NAND Backup and my Micro SD Card Files Backup.

It is a possibility that he could brick the Switch but at this point, what difference does it make?

I can’t use it so might as well send it to him and hope for the best.
 

GerBrew

Well-Known Member
OP
Newcomer
Joined
Jul 18, 2017
Messages
93
Trophies
0
XP
263
Country
Germany
Well before sending it, why don’t you restore the system? Or update it offline using a friend switch.

I can’t restore it because i can’t launch the normal switch mode with settings ect.
And i can’t go in to maintenance mode because I get the same problem, black screen.
 

bell1-1010

Well-Known Member
Newcomer
Joined
Jul 15, 2019
Messages
79
Trophies
0
Location
Emerald Isle of Erin
XP
1,077
Country
Italy
Man im confused, so if you started normally with no injection nothing happens, ergo stuck with black screen? If so it means you simply burned the efuse up to an higher software, technically an update should fix it.

but if you start with an injection your switch crashes when younenter the setting menu?

can you make a quick video witch your phone showing the problems?
 

Risingdawn

Tempallica
Member
Joined
May 22, 2010
Messages
1,088
Trophies
1
XP
1,700
Country
United Kingdom
Man im confused, so if you started normally with no injection nothing happens, ergo stuck with black screen? If so it means you simply burned the efuse up to an higher software, technically an update should fix it.

but if you start with an injection your switch crashes when younenter the setting menu?

can you make a quick video witch your phone showing the problems?
Dude burnt his fuses up to 9.1.0, then restored an 8.1.0 nand. Nand is corrupted, he's using old garbled SD card files.

All he has to do is update to 9.1.0 using choi and his Switch is working again.

To get his homebrew back all he has to do is format his SD card, stop using old files off his PC and start from scratch with correct sig patches and game updates to match his nand.

But for some reason he just cant seem to do it and get it working.
 

issayloki

Well-Known Member
Member
Joined
Mar 4, 2018
Messages
146
Trophies
0
Age
43
XP
1,386
Country
Thailand
Dude burnt his fuses up to 9.1.0, then restored an 8.1.0 nand. Nand is corrupted, he's using old garbled SD card files.

All he has to do is update to 9.1.0 using choi and his Switch is working again.

To get his homebrew back all he has to do is format his SD card, stop using old files off his PC and start from scratch with correct sig patches and game updates to match his nand.

But for some reason he just cant seem to do it and get it working.

That what I trie to told him to do with the factory reset to start with :). Anyway I belive he cpuld fix it him self if he do full updat again to 9.1 firmware.
 

bell1-1010

Well-Known Member
Newcomer
Joined
Jul 15, 2019
Messages
79
Trophies
0
Location
Emerald Isle of Erin
XP
1,077
Country
Italy
Dude burnt his fuses up to 9.1.0, then restored an 8.1.0 nand. Nand is corrupted, he's using old garbled SD card files.

All he has to do is update to 9.1.0 using choi and his Switch is working again.

To get his homebrew back all he has to do is format his SD card, stop using old files off his PC and start from scratch with correct sig patches and game updates to match his nand.

But for some reason he just cant seem to do it and get it working.
I remember reading your previous comment, it made completely sense for the problem he had at the time.

But as far as I understand he can’t access the homebrew menu either now, being in 8.1.0 what should he do?
Except for wiping the sd card and start from scratch?
I mean should he use the last version of atmosphere or looking for an older one?
 

issayloki

Well-Known Member
Member
Joined
Mar 4, 2018
Messages
146
Trophies
0
Age
43
XP
1,386
Country
Thailand
Yes I have Windows but for me i couldn’t fix it.

--------------------- MERGED ---------------------------
Yes. If i want to start it I get a Message that I need 64Bit.
Yes I have Windows but for me i couldn’t fix it.

--------------------- MERGED ---------------------------



Yes. If i want to start it I get a Message that I need 64Bit.
Have you install this on your PC?
bLLcrqd

Vitual C+++ 64bit
 
Last edited by issayloki,

issayloki

Well-Known Member
Member
Joined
Mar 4, 2018
Messages
146
Trophies
0
Age
43
XP
1,386
Country
Thailand
I remember reading your previous comment, it made completely sense for the problem he had at the time.

But as far as I understand he can’t access the homebrew menu either now, being in 8.1.0 what should he do?
Except for wiping the sd card and start from scratch?
I mean should he use the last version of atmosphere or looking for an older one?
To correct his problem he will need to proper update his swith with the trust source of 9.1 firmware with the link that I poested to him before,
Because he can't get into maintaining mode now to update officially from nintendo. Since he does't want to go online because he think he will get ban.

So now there is nothing to do with the file on sd card at all. I told him to try with new Sd card with new files from sdsetup, still not working at that time when his swith is on 9.1, Which was updated from.8.1 with .nca problem.
Now when his on 9.1 he want to restore his backup which is 8.1, As I warn him about this restore would be downgrade his system back to 8.1 and it will have problem. So he choose to restore his system.and it turn into paper weight.
He has chance to correct this problem since his switch is on 9.1 with incomplete .nca files update from 8.1, Which he could reupdate it again with ChoiNX.
 

Risingdawn

Tempallica
Member
Joined
May 22, 2010
Messages
1,088
Trophies
1
XP
1,700
Country
United Kingdom
I remember reading your previous comment, it made completely sense for the problem he had at the time.

But as far as I understand he can’t access the homebrew menu either now, being in 8.1.0 what should he do?
Except for wiping the sd card and start from scratch?
I mean should he use the last version of atmosphere or looking for an older one?
I should think he can launch homebrew menu holding R down while launching an app.

Or if he formats his SD card and puts fresh atmos files on compatible with 8.1.0 should also fix it, as I suspect he just has mismatched/old/garbled atmos files which is why he can't launch from home menu.
 
  • Like
Reactions: bell1-1010

GerBrew

Well-Known Member
OP
Newcomer
Joined
Jul 18, 2017
Messages
93
Trophies
0
XP
263
Country
Germany
I should think he can launch homebrew menu holding R down while launching an app.

Or if he formats his SD card and puts fresh atmos files on compatible with 8.1.0 should also fix it, as I suspect he just has mismatched/old/garbled atmos files which is why he can't launch from home menu.

I miss matched nothing. I used this guide. https://nh-server.github.io/switch-guide/

With only and Really! Only new Files.
I still get black screens.

I was first 8.1.0 (Exfat)
Updated to 9.1.0 (NoExfat)
Switched to 9.1.0 (ExFat)
Downgraded to 8.1.0 (ExFat)
So far no black screen error.
Then I restored my 8.1.0 (ExFat) NAND Backup and here we are.

I can’t launch into the CFW, if I want to then I get a black screen.
If I want to go into maintenance Mode, Black screen.
I use only new files, only. All I can do us start .bin Files like the Hekate thing where you can control it with touchscreen and Start other .bin Files.

I used new files.
I used different Micro SD Cards.
I used Exfat and FAT32.
Nothing solves my problem.

Would I have to guess than I would say my NAND Backup is Broken and a Factory Reset or a 6.1.0 Downgrade via PC could reset my console and it could work again.

But I can’t do this with my console right now and on PC I need at least 64Bit to start a Program that would help me do it.
 
Last edited by GerBrew,

bell1-1010

Well-Known Member
Newcomer
Joined
Jul 15, 2019
Messages
79
Trophies
0
Location
Emerald Isle of Erin
XP
1,077
Country
Italy
I miss matched nothing. I used this guide. https://nh-server.github.io/switch-guide/

I can’t launch into the CFW, if I want to then I get a black screen.
If I want to go into maintenance Mode, Black screen.
I use only new files, only. All I can do us start .bin Files like the Hekate thing where you can control it with touchscreen and Start other .bin Files.

Do us a favour, turn the switch off completely, then go in rcm mode.
From there start atmosphere using nothing else but fusee, the official loader for atmosphere.

Tell us what happens then.
 

GerBrew

Well-Known Member
OP
Newcomer
Joined
Jul 18, 2017
Messages
93
Trophies
0
XP
263
Country
Germany
Do us a favour, turn the switch off completely, then go in rcm mode.
From there start atmosphere using nothing else but fusee, the official loader for atmosphere.

Tell us what happens then.

I did it again, nothing changed.
Three Atmosphere screens pop up and then it cuts to black screen.
 

Risingdawn

Tempallica
Member
Joined
May 22, 2010
Messages
1,088
Trophies
1
XP
1,700
Country
United Kingdom
I miss matched nothing. I used this guide. https://nh-server.github.io/switch-guide/

With only and Really! Only new Files.
I still get black screens.

I was first 8.1.0 (Exfat)
Updated to 9.1.0 (NoExfat)
Switched to 9.1.0 (ExFat)
Downgraded to 8.1.0 (ExFat)
So far no black screen error.
Then I restored my 8.1.0 (ExFat) NAND Backup and here we are.

I can’t launch into the CFW, if I want to then I get a black screen.
If I want to go into maintenance Mode, Black screen.
I use only new files, only. All I can do us start .bin Files like the Hekate thing where you can control it with touchscreen and Start other .bin Files.

I used new files.
I used different Micro SD Cards.
I used Exfat and FAT32.
Nothing solves my problem.

Would I have to guess than I would say my NAND Backup is Broken and a Factory Reset or a 6.1.0 Downgrade via PC could reset my console and it could work again.

But I can’t do this with my console right now and on PC I need at least 64Bit to start a Program that would help me do it.
Yeah but now you're using Atmos files designed for 9.1.0 fw on a 8.1.0 fw so that's probably the issue, use an older Atmos and see how that works.
Stop keep talking about downgrades, you're going to brick your Switch. I told you not to last time and you went ahead and did it and now it's even more broken.
Downgrading your Nand is NOT going to help you.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Veho @ Veho:
    The fuuuuu---
  • Veho @ Veho:
    I thought it was an actual xBox at that price.
  • Sicklyboy @ Sicklyboy:
    I wanna grab a 360 Slim and a 360 E one of these days. Missed the boat of getting them at their lowest though, once they were discontinued. Could've got them for cheap back when I was a broke 20 something working at Target, but then again, I was a broke 20 something working at Target
  • Veho @ Veho:
    Being broke is no fun.
  • K3Nv2 @ K3Nv2:
    @Sicklyboy, $150 isn't that bad for a jtag slim on ebay
  • Veho @ Veho:
    I only wish it was actually playable.
  • Veho @ Veho:
    There's a guy on the Tube of You that makes playable mechanical arcade games out of Lego. This could work on the same principle.
  • Veho @ Veho:
    Just a couple of guys taking their manatee out for some fresh air, why you have to molest them?
  • Veho @ Veho:
    Stupid Chinese shop switched their shipping company and this one is slooooooow.
  • LeoTCK @ LeoTCK:
    STOP BUYING CHINESE CRAP THEN
  • LeoTCK @ LeoTCK:
    SUPPORT LOCAL PRODUCTS, MAKE REVOLUTION
  • LeoTCK @ LeoTCK:
    THEY KEEP REMOVING LOCAL SHIt AND REPLACING WItH INFERIOR CHINESE CRAP
  • LeoTCK @ LeoTCK:
    THATS WHY MY PARTNER CANT GET A GOOTWEAR HIS SIZE ANYMORE
  • LeoTCK @ LeoTCK:
    HE HAS BIG FOOT AND BIG DUCK
  • LeoTCK @ LeoTCK:
    d*ck i mean*
  • LeoTCK @ LeoTCK:
    lol
  • Veho @ Veho:
    Mkay.
  • Veho @ Veho:
    I just ordered another package from China just to spite you.
  • SylverReZ @ SylverReZ:
    Communism lol
  • SylverReZ @ SylverReZ:
    OUR products
  • The Real Jdbye @ The Real Jdbye:
    @LeoTCK actually good quality products are dying out because they can't compete with dropshipped chinese crap
    +1
    The Real Jdbye @ The Real Jdbye: @LeoTCK actually good quality products are dying out because they can't compete with dropshipped... +1