Hacking From SX OS Emunand to Emu Nand Atmosphere

masterpouret · Jan 22, 2020

Hello everyone,

I'm new to the Switch hack and after understand most important points I guess of how to use SX OS, I wished to do a dual boot between SX OS and Atmosphere, using my emu nand created for SX OS in Atmosphere, because I want also to enjoy Dreamcast emulation on the go, but flycast is not yet supported in SX OS for now.

So I followed both of this guide, first this one : https://gbatemp.net/threads/how-to-setup-atmosphere-emummc.541060/

which I completed with this one : https://gbatemp.net/threads/tutorial-from-sx-os-to-atmosphere.533337/ to boot Hekate and bein possible to launch Hekate thus from sx os so that I can launch Atmosphere. I followed both guide and didn't seems to miss anything. Though, when I use Hekate, I have the possibilty to launch the atmosphere payload, but if I check on emuMMC menu, it's written under emuMMC info and selection menu that it's disabled, as if if I launch my payload for Atmosphere, it will not use the emunand, so my question would be, is it normal and it will still launch Atmosphere with my Emunand or did I do something wrong or do I need to activate something in this menu that I don't know so that it works ?

If some people could help me, it would be much apreciated. Thank you very much to read me and for your answers in advance.

masterpouret · Jan 22, 2020

I took pictures of my situation so that it's easier to understand. I really hope someone can help me.
My Emu Nand from SX OS was made with hidden file.

comput3rus3r · Jan 22, 2020

I'm extremely limited in knowledge of this but I think you'd need to convert the hidden emunand into sd files before you can use it on atmosphere.

masterpouret · Jan 22, 2020

Thank you for your message !
I don't know much about this though, but do you know how can I do this ?
The guide I followed said though to do a step by step set up for hidden files especially, so that's why I don't know why it does not work.
Is there any risk it may affect my sx os emunand too ?
Thank you very much !

210modz · Jan 22, 2020

Just use the emunand tool posted in the game save section.

Pouret · Jan 22, 2020

Thank you for your messages again !

Can you give me a link to this tool ? Or you mean it's a tool inside my hardware once I'm in my Emunand ? Thank you. Would be much apreciated if you could explain me in details.

Draxzelex · Jan 22, 2020

https://gbatemp.net/threads/emutool...r-sd-switch-emu-type-on-sxos-and-more.550756/

masterpouret · Jan 22, 2020

Thank you for the link ! It's really big help. So I just have to give as source to make my Emunand from SX OS hidden file to SX OS file ? Will it work on the same sd card whitout changing it ?

Thank you so much again

tomx86 · Jan 22, 2020

1. Lunch hekate in RCM, go to "emuMMC", click on "Migrate emuMMC", and click continue.
2. Turn off the console and mount the switch microSD card to your pc, and create "Emutendo" folder.
3. Move everything from "SDroot/emuMMC/ER00/Nintendo/" to "Emutendo".
4. Copy "raw_based" file from "SDroot/emuMMC/ER00/" to "Emutendo".
5. Edit the "emummc.ini" file in "SDroot/emuMMC/":
from:
[emummc]
enabled=1
sector=0x2
path=emuMMC/ER00
id=0x0000
nintendo_path=emuMMC/ER00/Nintendo

to:
[emummc]
enabled=1
sector=0x2
path=Emutendo
id=0x0000
nintendo_path=Emutendo

6. Put the microSD card back to the console, and run hekate in RCM.
7. Go to "Payloads", launch Atmosphere, and now you should be able to run emuNAND on it, and SX emuNAND will still work too.
PS. If you got any mods that you want to work in Atmosphere too, then copy them from "SDroot/sxos/titles/" to "SDroot/atmosphere/contents/".
You might also need this:
https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/

Pouret · Jan 22, 2020

Thank you so much for the explanation ! I will try this little bit later and tell you if this worked. It's really kind of you to help me.

masterpouret · Jan 22, 2020

tomx86 said:
1. Lunch hekate in RCM, go to "emuMMC", click on "Migrate emuMMC", and click continue.
2. Turn off the console and mount the switch microSD card to your pc, and create "Emutendo" folder.
3. Move everything from "SDroot/emuMMC/ER00/Nintendo/" to "Emutendo".
4. Copy "raw_based" file from "SDroot/emuMMC/ER00/" to "Emutendo".
5. Edit the "emummc.ini" file in "SDroot/emuMMC/":
from:
[emummc]
enabled=1
sector=0x2
path=emuMMC/ER00
id=0x0000
nintendo_path=emuMMC/ER00/Nintendo

to:
[emummc]
enabled=1
sector=0x2
path=Emutendo
id=0x0000
nintendo_path=Emutendo

6. Put the microSD card back to the console, and run hekate in RCM.
7. Go to "Payloads", launch Atmosphere, and now you should be able to run emuNAND on it, and SX emuNAND will still work too.
PS. If you got any mods that you want to work in Atmosphere too, then copy them from "SDroot/sxos/titles/" to "SDroot/atmosphere/contents/".
You might also need this:
https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/

Thank you very much for your help ! I succeded to have an emummc in Hekate which is working.
However, once I try to lunch Atmosphere with fusee gelee primary.bin, the custom firmware first seems to start and then appeared at the screen the sx os screen again and booted the sx os firmware. Then I tried again two more times, and after the atmosphere I had a black screen not letting me through the custom firmware and had to reboot my hardware. Thank you all for your help until now everyone. I feel I'm maybe close to make it works, it would be so kind of you if you could help me to finish the installation. Thank you very much.

Pouret · Jan 23, 2020

Can someone help me to go through the black screen now when I launch Atmosphere ?

Thank you very much if someone can do that.

masterpouret · Jan 23, 2020

I tried to use many different versions of Atmosphere and while I had a lot of black screen with 10 version, with 9.2 version, I had a black screen but also a message telling me that : [NX BOOT ] Unable to identify package 1!. I hope it can lead you to where my problem may be. Thank you.

Acidwicht · Jan 23, 2020

try to install AtlasNX\Kosmos and install sigpatches. should work i did the same for dualboot SXOS and Atmosphere. You can boot into hekate with payload and choose load cfw EmuMMC

masterpouret · Jan 24, 2020

I will try to do what you teached me, acidwicht. Thank you very much for the help. Today I launched it with no emu Nand to see if ti works and it works very well. So it was just it didn't find where is my Nand in the sd card I think. I will try what you told me just in case it works. Thank you very much.

--------------------- MERGED ---------------------------

Also about atlas NX, to install sigpatch, should I need to use the Kosmostoolbox ? If you could give me some explanations would be very apreciated. Thank you so much.

lilithx · May 2, 2020

tomx86 said:
1. Lunch hekate in RCM, go to "emuMMC", click on "Migrate emuMMC", and click continue.
2. Turn off the console and mount the switch microSD card to your pc, and create "Emutendo" folder.
3. Move everything from "SDroot/emuMMC/ER00/Nintendo/" to "Emutendo".
4. Copy "raw_based" file from "SDroot/emuMMC/ER00/" to "Emutendo".
5. Edit the "emummc.ini" file in "SDroot/emuMMC/":
from:
[emummc]
enabled=1
sector=0x2
path=emuMMC/ER00
id=0x0000
nintendo_path=emuMMC/ER00/Nintendo

to:
[emummc]
enabled=1
sector=0x2
path=Emutendo
id=0x0000
nintendo_path=Emutendo

6. Put the microSD card back to the console, and run hekate in RCM.
7. Go to "Payloads", launch Atmosphere, and now you should be able to run emuNAND on it, and SX emuNAND will still work too.
PS. If you got any mods that you want to work in Atmosphere too, then copy them from "SDroot/sxos/titles/" to "SDroot/atmosphere/contents/".
You might also need this:
https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/

has anyone found any solutions? i've followed these steps but sx os can load from hekate in emu like normal but when i select payloads>atmosphere i get the splash screens and then black screen.

Pericales · May 3, 2020

Hi guy, you can try this loader

Hacking From SX OS Emunand to Emu Nand Atmosphere

Active Member

Active Member

Attachments

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

Active Member

Member

New Member

Similar threads

Popular threads in this forum